Version bump.

5 files changed, 122 insertions, 0 deletions

diff --git a/net-dialup/pptpd/files/1.1.4_beta3/options.pptpd b/net-dialup/pptpd/files/1.1.4_beta3/options.pptpd
new file mode 100644
index 000000000000..2ec90e4ce90c
--- /dev/null
+++ b/net-dialup/pptpd/files/1.1.4_beta3/options.pptpd
@@ -0,0 +1,27 @@
+## CHANGE TO SUIT YOUR SYSTEM
+lock
+
+## turn pppd syslog debugging on
+#debug
+
+## change 'pptpd' to whatever you specify as your server name in chap-secrets
+name pptpd
+
+proxyarp
+bsdcomp 0
+
+# This option applies if you use ppp with chapms-strip-domain patch
+#chapms-strip-domain
+
+# These options apply if you use ppp with mppe patch
+# NB! You should also apply the ChapMS-V2 patch
+#-chap
+#-chapms
+#+chapms-v2
+#mppe-128
+#mppe-stateless
+
+# These options will tell ppp to pass on these to your clients
+# To use ms-wins or ms-dns in options.pptpd it must exist in /etc/resolv.conf
+#ms-wins your.server.here
+#ms-dns your.server.here
diff --git a/net-dialup/pptpd/files/1.1.4_beta3/pptpd.conf b/net-dialup/pptpd/files/1.1.4_beta3/pptpd.conf
new file mode 100644
index 000000000000..17e5d872c833
--- /dev/null
+++ b/net-dialup/pptpd/files/1.1.4_beta3/pptpd.conf
@@ -0,0 +1,69 @@
+################################################################################
+#
+# Sample PoPToP configuration file
+#
+# for PoPToP version 1.1.4-b3
+#
+################################################################################
+
+# TAG: speed
+#
+#	Specifies the speed for the PPP daemon to talk at.
+#
+#speed 115200
+
+# TAG: option
+#
+#	Specifies the location of the PPP options file.
+#	By default PPP looks in '/etc/ppp/options'
+#
+#option /etc/ppp/options.pptpd
+
+# TAG: stimeout
+#
+#	Specifies timeout (in seconds) on starting ctrl connection
+#
+# stimeout 10
+
+# TAG: debug
+#
+#	Turns on (more) debugging to syslog
+#
+#debug
+
+# TAG: bcrelay <if>
+#
+#	Turns on broadcast relay to clients from interface <if>
+#
+#bcrelay eth1
+
+# TAG: localip
+# TAG: remoteip
+#
+#	Specifies the local and remote IP address ranges.
+#
+#	You can specify single IP addresses seperated by commas or you can
+#	specify ranges, or both. For example:
+#
+#		192.168.0.234,192.168.0.245-249,192.168.0.254
+#
+#	IMPORTANT RESTRICTIONS:
+#
+#	1. No spaces are permitted between commas or within addresses.
+#
+#	2. If you give more IP addresses than MAX_CONNECTIONS, it will
+#	   start at the beginning of the list and go until it gets 
+#	   MAX_CONNECTIONS IPs. Others will be ignored.
+#
+#	3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
+#	   you must type 234-238 if you mean this.
+#
+#	4. If you give a single localIP, that's ok - all local IPs will
+#	   be set to the given one. You MUST still give at least one remote
+#	   IP for each simultaneous client.
+#
+#localip 192.168.0.1
+#remoteip 192.168.0.234-238,192.168.0.245
+# or
+#localip 192.168.0.234-238,192.168.0.245
+#remoteip 192.168.1.234-238,192.168.1.245
diff --git a/net-dialup/pptpd/files/digest-pptpd-1.1.4_beta3 b/net-dialup/pptpd/files/digest-pptpd-1.1.4_beta3
new file mode 100644
index 000000000000..83cbd11e5063
--- /dev/null
+++ b/net-dialup/pptpd/files/digest-pptpd-1.1.4_beta3
@@ -0,0 +1 @@
+MD5 4dd39d55beef23d4d3948a7df844bbbe pptpd-1.1.4-b3.tar.gz 169018
diff --git a/net-dialup/pptpd/files/pptpd-confd b/net-dialup/pptpd/files/pptpd-confd
new file mode 100644
index 000000000000..1169e57f1c7c
--- /dev/null
+++ b/net-dialup/pptpd/files/pptpd-confd
@@ -0,0 +1,5 @@
+# Config file for /etc/init.d/pptpd
+
+# Any extra options you want to pass to pptpd
+# on start-up should be put here.
+PPTPD_OPTS=""
diff --git a/net-dialup/pptpd/files/pptpd-init b/net-dialup/pptpd/files/pptpd-init
new file mode 100644
index 000000000000..09f69fb101d4
--- /dev/null
+++ b/net-dialup/pptpd/files/pptpd-init
@@ -0,0 +1,20 @@
+#!/sbin/runscript
+
+depend() {
+	net
+}
+
+start() {
+	ebegin "Starting pptpd"
+	start-stop-daemon --start --quiet --exec /usr/sbin/pptpd -- ${PPTPD_OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping pptpd"
+	start-stop-daemon --stop --quiet --pidfile /var/run/pptpd.pid
+	result=$?
+	start-stop-daemon --stop --quiet --oknodo --exec /usr/sbin/pptpctrl
+	result=$(( $result + $? ))
+	eend $result
+}