diff options
Diffstat (limited to 'sys-apps/lm_sensors/files')
5 files changed, 278 insertions, 0 deletions
diff --git a/sys-apps/lm_sensors/files/digest-lm_sensors-2.9.1 b/sys-apps/lm_sensors/files/digest-lm_sensors-2.9.1 new file mode 100644 index 000000000000..9b9f92a218ca --- /dev/null +++ b/sys-apps/lm_sensors/files/digest-lm_sensors-2.9.1 @@ -0,0 +1 @@ +MD5 f5af615e39441d95471bdb72a3f01709 lm_sensors-2.9.1.tar.gz 870765 diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d new file mode 100644 index 000000000000..5adadecf56e9 --- /dev/null +++ b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d @@ -0,0 +1,105 @@ +#!/sbin/runscript +# Copyright 1999-2005 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d,v 1.1 2005/06/11 11:28:20 brix Exp $ + +checkconfig() { + if [ ! -f /etc/conf.d/lm_sensors ]; then + eerror "/etc/conf.d/lm_sensors does not exist, try running sensors-detect" + return 1 + fi + + if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then + if [ -z "${MODULE_0}" ]; then + eerror "MODULE_0 is not set in /etc/conf.d/lm_sensors, try running sensors-detect" + return 1 + fi + fi +} + +start() { + checkconfig || return 1 + + if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then + einfo "Loading lm_sensors modules..." + + mount | grep sysfs &> /dev/null + if [ ${?} == 0 ]; then + if ! ( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ); then + ebegin " Loading i2c-core" + modprobe i2c-core &> /dev/null + if [ ${?} != 0 ]; then + eerror " Could not load i2c-core!" + eend 1 + fi + ( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ) || return 1 + eend 0 + fi + elif ! [ -e /proc/sys/dev/sensors ]; then + ebegin " Loading i2c-proc" + modprobe i2c-proc &> /dev/null + if [ ${?} != 0 ]; then + eerror " Could not load i2c-proc!" + eend 1 + fi + [ -e /proc/sys/dev/sensors ] || return 1 + eend 0 + fi + + i=0 + while true; do + module=`eval echo '$'MODULE_${i}` + module_args=`eval echo '$'MODULE_${i}_ARGS` + if [ -z "${module}" ]; then + break + fi + ebegin " Loading ${module}" + modprobe ${module} ${module_args} &> /dev/null + eend $? + i=$((i+1)) + done + fi + + if [ "${INITSENSORS}" = "yes" ]; then + if ! [ -f /etc/sensors.conf ]; then + eerror "/etc/sensors.conf does not exist!" + return 1 + fi + + ebegin "Initializing sensors" + /usr/bin/sensors -s &> /dev/null + eend ${?} + fi +} + +stop() { + checkconfig || return 1 + + if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then + einfo "Unloading lm_sensors modules..." + + # find the highest possible MODULE_ number + i=0 + while true; do + module=`eval echo '$'MODULE_${i}` + if [ -z "${module}" ] ; then + break + fi + i=$((i+1)) + done + + while [ ${i} -gt 0 ]; do + i=$((i-1)) + module=`eval echo '$'MODULE_${i}` + ebegin " Unloading ${module}" + rmmod ${module} &> /dev/null + eend $? + done + + if [ -e /proc/sys/dev/sensors ] ; then + ebegin " Unloading i2c-proc" + rmmod i2c-proc &> /dev/null + eend $? + fi + fi +} diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d new file mode 100644 index 000000000000..89672f74d38d --- /dev/null +++ b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d @@ -0,0 +1,7 @@ +# Copyright 1999-2005 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d,v 1.1 2005/06/11 11:28:20 brix Exp $ + +# Extra options to pass to the sensord daemon, +# see sensord(8) for more information +SENSORD_OPTIONS="" diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d new file mode 100644 index 000000000000..b5795e9e982a --- /dev/null +++ b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d @@ -0,0 +1,33 @@ +#!/sbin/runscript +# Copyright 1999-2005 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d,v 1.1 2005/06/11 11:28:20 brix Exp $ + +CONFIG=/etc/sensors.conf + +depend() { + need logger + use lm_sensors +} + +checkconfig() { + if [ ! -f ${CONFIG} ]; then + eerror "Configuration file ${CONFIG} not found" + return 1 + fi +} + +start() { + checkconfig || return 1 + + ebegin "Starting sensord" + start-stop-daemon --start --quiet --exec /usr/sbin/sensord \ + -- --config-file ${CONFIG} ${SENSORD_OPTIONS} + eend ${?} +} + +stop() { + ebegin "Stopping sensord" + start-stop-daemon --stop --quiet --pidfile /var/run/sensord.pid + eend ${?} +} diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensors-detect-gentoo.patch new file mode 100644 index 000000000000..90c1226d6acb --- /dev/null +++ b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensors-detect-gentoo.patch @@ -0,0 +1,132 @@ +diff -urp lm_sensors-2.9.1/prog/detect/sensors-detect lm_sensors-2.9.1-sensors-detect-gentoo/prog/detect/sensors-detect +--- lm_sensors-2.9.1/prog/detect/sensors-detect 2005-03-28 01:10:52.000000000 +0200 ++++ lm_sensors-2.9.1-sensors-detect-gentoo/prog/detect/sensors-detect 2005-06-05 14:10:01.000000000 +0200 +@@ -26,6 +26,14 @@ + # each be put in a separate file, using modules and packages. That is beyond + # me. + ++# Changelog ++# 02/Mar/2003, Rudo Thomas <thomr9am@ss1000.ms.mff.cuni.cz> ++# * a few small changes in config file output to reflect Gentoo Linux layout ++# - /etc/sysconfig -> /etc/conf.d ++# - /etc/rc.d/init.d -> /etc/init.d ++# - added a warning to the generated config file ++# - small change when asking about writing the new config file ++ + require 5.004; + + use strict; +@@ -5143,39 +5151,44 @@ sub main + my $use_isa = not <STDIN> =~ /\s*[Ss]/; + + my ($modprobes,$configfile) = generate_modprobes $use_isa; ++ print "\nIf you want to load the modules at startup, generate a config file\n", ++ "below and make sure lm_sensors gets started; e.g\n", ++ "\$ rc-update add lm_sensors default.\n"; + print "\nTo make the sensors modules behave correctly, add these lines to\n", +- "$modules_conf:\n\n"; ++ "/etc/modules.conf:\n\n"; + print "#----cut here----\n"; + print $configfile; +- print "#----cut here----\n"; +- print "\nTo load everything that is needed, add this to some /etc/rc* ", +- "file:\n\n"; +- print "#----cut here----\n"; +- print $modprobes; +- print "# sleep 2 # optional\n", +- "/usr/local/bin/sensors -s # recommended\n"; +- print "#----cut here----\n"; ++ print "#----end cut here----\n"; + print "\nWARNING! If you have some things built into your kernel, the list above\n", + "will contain too many modules. Skip the appropriate ones! You really should\n", + "try these commands right now to make sure everything is working properly.\n", + "Monitoring programs won't work until it's done.\n"; +- +- my $have_sysconfig = -d '/etc/sysconfig'; +- print "\nDo you want to generate /etc/sysconfig/lm_sensors? (". +- ($have_sysconfig?"YES/no":"yes/NO")."): "; +- if ($> != 0) { +- print "\nAs you are not root, we shall skip this step.\n"; +- } else { +- $_ = <STDIN>; +- if (($have_sysconfig and not m/^\s*[Nn]/) or m/^\s*[Yy]/) { +- unless ($have_sysconfig) { +- mkdir '/etc/sysconfig', 0777 +- or die "Sorry, can't create /etc/sysconfig ($!)?!?"; +- } +- open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors") +- or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)?!?"; +- print SYSCONFIG <<'EOT'; +-# /etc/sysconfig/sensors - Defines modules loaded by /etc/rc.d/init.d/lm_sensors ++ ++ print "To load everything that is needed, execute the commands above..."; ++ ++ print "\n\n#----cut here----\n"; ++ print $modprobes; ++ print "# sleep 2 # optional\n", ++ "/usr/bin/sensors -s # recommended\n"; ++ ++ my $have_config = -f '/etc/conf.d/lm_sensors'; ++ print "\nDo you want to ".($have_config?"overwrite":"generate"). ++ " /etc/conf.d/lm_sensors? Enter s to specify other file name?\n", ++ " (".($have_config?"yes/NO":"YES/no")."/s): "; ++ my $reply = <STDIN>; ++ ++ if (($have_config and $reply =~ /^\s*[Yy]/) or ++ (not $have_config and not $reply =~ /^\s*[Nn]/) or ++ $reply =~ /^\s*[Ss]/) { ++ my $filename = "/etc/conf.d/lm_sensors"; ++ if ($reply =~ /^\s*[Ss]/) { ++ print "Specify the file to store the configuration to: "; ++ $filename = <STDIN>; ++ } ++ open(SYSCONFIG, ">".$filename) ++ or die "Sorry, can't create $filename ($!)."; ++ print SYSCONFIG <<'EOT'; ++# /etc/conf.d/sensors - Defines modules loaded by /etc/init.d/lm_sensors + # Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl> + # + # This program is free software; you can redistribute it and/or modify +@@ -5196,18 +5209,27 @@ sub main + # See also the lm_sensors homepage at: + # http://www2.lm-sensors.nu/~lm78/index.html + # +-# This file is used by /etc/rc.d/init.d/lm_sensors and defines the modules to +-# be loaded/unloaded. This file is sourced into /etc/rc.d/init.d/lm_sensors. ++# This file is used by /etc/init.d/lm_sensors and defines the modules to ++# be loaded/unloaded. This file is sourced into /etc/init.d/lm_sensors. + # + # The format of this file is a shell script that simply defines the modules + # in order as normal variables with the special names: + # MODULE_0, MODULE_1, MODULE_2, etc. + # ++# Please note that the numbers in MODULE_X must start at 0 and increase in ++# steps of 1. Any number that is missing will make the init script skip the ++# rest of the modules. Use MODULE_X_ARGS for arguments. ++# + # List the modules that are to be loaded for your system + # + EOT + print SYSCONFIG +- "# Generated by sensors-detect on " . scalar localtime() . "\n"; ++ "# Generated by sensors-detect on " . scalar localtime() . "\n\n"; ++ print SYSCONFIG ++ "# Load modules at startup\n". ++ "LOADMODULES=yes\n\n". ++ "# Initialize sensors at startup\n". ++ "INITSENSORS=yes\n\n"; + my @modules = grep /^modprobe /, split "\n", $modprobes; + my $i = 0; + my $sysconfig = ""; +@@ -5217,9 +5239,7 @@ EOT + $i++; + } + print SYSCONFIG $sysconfig; +- print "Copy prog/init/lm_sensors.init to /etc/rc.d/init.d/lm_sensors\n"; +- print "for initialization at boot time.\n"; +- } ++ print "Done.\n"; + } + } + +Only in lm_sensors-2.9.1-sensors-detect-gentoo/prog/detect: sensors-detect.orig |