# Kjartan Maraas , 1998-2009. # # msgid "" msgstr "" "Project-Id-Version: anaconda FC12\n" "Report-Msgid-Bugs-To: anaconda-devel-list@redhat.com\n" "POT-Creation-Date: 2010-08-07 10:23+0200\n" "PO-Revision-Date: 2009-08-31 13:18+0200\n" "Last-Translator: Kjartan Maraas \n" "Language-Team: Norwegian/Bokmaal \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: anaconda:342 msgid "Press for a shell" msgstr "Trykk for et skall" #: anaconda:357 rescue.py:332 rescue.py:358 rescue.py:371 rescue.py:454 #: rescue.py:466 text.py:657 loader/cdinstall.c:228 loader/cdinstall.c:232 #: loader/cdinstall.c:248 loader/cdinstall.c:251 loader/cdinstall.c:427 #: loader/cdinstall.c:431 loader/cdinstall.c:504 loader/dirbrowser.c:129 #: loader/driverdisk.c:266 loader/driverdisk.c:422 loader/driverdisk.c:460 #: loader/driverdisk.c:491 loader/driverdisk.c:526 loader/driverdisk.c:542 #: loader/driverdisk.c:554 loader/driverdisk.c:562 loader/driverdisk.c:722 #: loader/driverdisk.c:761 loader/driverselect.c:79 loader/driverselect.c:179 #: loader/hdinstall.c:115 loader/hdinstall.c:260 loader/hdinstall.c:318 #: loader/hdinstall.c:352 loader/hdinstall.c:424 loader/hdinstall.c:467 #: loader/hdinstall.c:480 loader/kbd.c:119 loader/kickstart.c:132 #: loader/kickstart.c:142 loader/kickstart.c:184 loader/kickstart.c:189 #: loader/kickstart.c:296 loader/kickstart.c:328 loader/kickstart.c:510 #: loader/lang.c:114 loader/lang.c:373 loader/loader.c:429 loader/loader.c:465 #: loader/loader.c:505 loader/loader.c:523 loader/loader.c:540 #: loader/loader.c:577 loader/loader.c:1194 loader/loader.c:1375 #: loader/mediacheck.c:47 loader/mediacheck.c:86 loader/mediacheck.c:93 #: loader/mediacheck.c:97 loader/mediacheck.c:106 loader/method.c:277 #: loader/method.c:351 loader/modules.c:382 loader/modules.c:398 #: loader/net.c:578 loader/net.c:949 loader/net.c:1557 loader/net.c:1578 #: loader/net.c:1848 loader/net.c:1867 loader/net.c:1879 #: loader/nfsinstall.c:91 loader/nfsinstall.c:279 loader/nfsinstall.c:296 #: loader/nfsinstall.c:366 loader/telnetd.c:93 loader/urlinstall.c:137 #: loader/urlinstall.c:159 loader/urlinstall.c:221 loader/urlinstall.c:372 #: loader/urlinstall.c:383 loader/urlinstall.c:390 loader/urls.c:259 #: loader/urls.c:330 loader/urls.c:336 textw/constants_text.py:44 msgid "OK" msgstr "OK" #: anaconda:364 #, fuzzy msgid "You do not have enough RAM to use the graphical installer." msgstr "" "Du har ikke nok RAM til å bruke grafisk installasjon på denne maskinen. " "Starter tekstmodus." #: anaconda:368 msgid "" "Try the text mode installer by running:\n" "\n" "'/usr/bin/liveinst -T'\n" "\n" " from a root terminal." msgstr "" #: anaconda:371 #, fuzzy msgid "Not enough RAM" msgstr "Ikke nok plass" #: anaconda:381 #, fuzzy msgid "Starting text mode." msgstr "Bruker tekstmodus" #: anaconda:638 msgid "Starting graphical installation." msgstr "Starter grafisk installasjon." #: anaconda:1062 msgid "Would you like to use VNC?" msgstr "Vil du bruke VNC?" #: anaconda:1063 msgid "" "Text mode provides a limited set of installation options. It does not allow " "you to specify your own partitioning layout or package selections. Would " "you like to use VNC mode instead?" msgstr "" #: anaconda:1089 msgid "Graphical installation is not available. Starting text mode." msgstr "Grafisk installasjon er ikke tilgjengelig. Starter tekstmodus." #: anaconda:1097 msgid "DISPLAY variable not set. Starting text mode." msgstr "DISPLAY-variabelen er ikke satt. Starter tekstmodus." #: backend.py:135 #, python-format msgid "Upgrading %s\n" msgstr "Oppgraderer %s\n" #: backend.py:137 #, python-format msgid "Installing %s\n" msgstr "Installerer %s\n" #: backend.py:150 msgid "Copying File" msgstr "Kopierer fil" #: backend.py:151 msgid "Transferring install image to hard drive" msgstr "Overfører installasjonsbildet til harddisken" #: backend.py:161 msgid "" "An error occurred transferring the install image to your hard drive. This " "is often cause by damaged or low quality media." msgstr "" "En feil oppsto under overføring av installasjonsbildet til din harddisk. Det " "er sannsynlig at mediet er ødelagt eller dårlig." #: backend.py:165 msgid "" "An error occurred transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "En feil oppsto under overføring av installasjonsfilen til din harddisk. Du " "har sannsynligvis sluppet opp for diskplass." #: backend.py:169 image.py:289 livecd.py:198 livecd.py:400 #: partIntfHelpers.py:237 text.py:355 text.py:359 yuminstall.py:416 #: yuminstall.py:805 yuminstall.py:923 yuminstall.py:928 yuminstall.py:1190 #: yuminstall.py:1249 yuminstall.py:1440 yuminstall.py:1462 #: iw/advanced_storage.py:90 iw/advanced_storage.py:100 #: iw/advanced_storage.py:176 iw/advanced_storage.py:179 #: iw/advanced_storage.py:207 iw/autopart_type.py:96 iw/cleardisks_gui.py:43 #: iw/cleardisks_gui.py:53 iw/filter_gui.py:408 iw/osbootwidget.py:211 #: iw/osbootwidget.py:220 iw/raid_dialog_gui.py:215 iw/raid_dialog_gui.py:766 #: iw/raid_dialog_gui.py:805 iw/task_gui.py:54 iw/task_gui.py:155 #: iw/task_gui.py:302 iw/task_gui.py:463 loader/cdinstall.c:228 #: loader/cdinstall.c:504 loader/driverdisk.c:266 loader/driverdisk.c:491 #: loader/driverdisk.c:526 loader/driverdisk.c:554 loader/driverdisk.c:562 #: loader/driverdisk.c:626 loader/hdinstall.c:115 loader/hdinstall.c:318 #: loader/hdinstall.c:424 loader/hdinstall.c:467 loader/hdinstall.c:480 #: loader/kickstart.c:296 loader/lang.c:114 loader/loader.c:429 #: loader/loader.c:540 loader/loader.c:1194 loader/mediacheck.c:47 #: loader/mediacheck.c:86 loader/mediacheck.c:93 loader/mediacheck.c:97 #: loader/method.c:277 loader/method.c:351 loader/nfsinstall.c:279 #: loader/nfsinstall.c:296 loader/telnetd.c:93 loader/urlinstall.c:137 #: loader/urlinstall.c:159 loader/urlinstall.c:221 loader/urls.c:330 #: loader/urls.c:336 storage/__init__.py:215 storage/__init__.py:1785 #: storage/__init__.py:1872 textw/netconfig_text.py:282 #: textw/partition_text.py:186 textw/partition_text.py:192 #: textw/partition_text.py:198 textw/partition_text.py:227 #: textw/partition_text.py:273 textw/upgrade_text.py:181 #: textw/upgrade_text.py:188 gentoo/livecd.py:476 gentoo/utils.py:1005 msgid "Error" msgstr "Feil" #: bootloader.py:55 bootloader.py:221 bootloader.py:227 gui.py:1103 #: gui.py:1163 image.py:82 installinterfacebase.py:41 text.py:486 text.py:546 #: yuminstall.py:1418 yuminstall.py:1622 yuminstall.py:1657 #: iw/blpasswidget.py:148 iw/upgrade_swap_gui.py:190 #: iw/upgrade_swap_gui.py:198 iw/upgrade_swap_gui.py:205 #: textw/upgrade_text.py:193 msgid "Warning" msgstr "Advarsel" #: bootloader.py:56 msgid "" "Filesystems have already been activated. You cannot go back past this " "point.\n" "\n" "Would you like to continue with the installation?" msgstr "" "Filsystemene dine er allerede aktivert. Du vil ikke kunne gå tilbake til " "tidligere skjermer.\n" "\n" "Vil du fortsette installasjonsprosessen?" #: bootloader.py:60 gui.py:1054 gui.py:1199 gui.py:1406 image.py:91 #: kickstart.py:156 livecd.py:205 livecd.py:407 packages.py:130 upgrade.py:56 #: upgrade.py:237 yuminstall.py:257 yuminstall.py:703 yuminstall.py:925 #: yuminstall.py:930 yuminstall.py:1010 yuminstall.py:1016 yuminstall.py:1169 #: yuminstall.py:1186 yuminstall.py:1239 yuminstall.py:1427 yuminstall.py:1446 #: yuminstall.py:1469 storage/__init__.py:112 storage/__init__.py:219 #: storage/__init__.py:1966 storage/dasd.py:139 gentoo/livecd.py:483 msgid "_Exit installer" msgstr "A_vslutt installering" #: bootloader.py:60 image.py:92 image.py:251 kickstart.py:1350 #: kickstart.py:1389 upgrade.py:56 yuminstall.py:1244 yuminstall.py:1428 #: iw/partition_gui.py:1603 storage/__init__.py:1967 msgid "_Continue" msgstr "_Fortsett" #: bootloader.py:158 msgid "Bootloader" msgstr "Oppstartslaster" #: bootloader.py:158 msgid "Installing bootloader." msgstr "Installerer oppstartslaster." #: bootloader.py:222 msgid "" "There was an error installing the bootloader. The system may not be " "bootable." msgstr "" #: bootloader.py:228 msgid "" "No kernel packages were installed on the system. Bootloader configuration " "will not be changed." msgstr "" "Ingen kjerne-pakker ble installert på systemet. Konfigurasjonen av " "oppstartslasteren vil ikke bli endret." #: cmdline.py:56 msgid "Completed" msgstr "Ferdig" #: cmdline.py:64 msgid "In progress" msgstr "Pågår" #: cmdline.py:89 gui.py:1194 kickstart.py:1214 kickstart.py:1222 #: kickstart.py:1260 kickstart.py:1268 text.py:392 #, python-format msgid "" "The following error was found while parsing the kickstart configuration " "file:\n" "\n" "%s" msgstr "" "Følgende feil ble funnet under lesing av din kickstart-konfigurasjon:\n" "\n" "%s" #: cmdline.py:101 msgid "" "Command line mode requires all choices to be specified in a kickstart " "configuration file." msgstr "" #: cmdline.py:120 cmdline.py:127 cmdline.py:134 cmdline.py:144 cmdline.py:154 msgid "Can't have a question in command line mode!" msgstr "Kan ikke stille spørsmål i kommandolinjemodus!" #: constants.py:75 msgid "" "An unhandled exception has occurred. This is most likely a bug. Please " "save a copy of the detailed exception and file a bug report" msgstr "" "Et uhåndtert unntak har oppstått. Dette er sannsynligvis en feil. Kopier " "hele teksten fra feilmeldingen og send inn en feilrapport" #: constants.py:81 msgid " with the provider of this software." msgstr " hos den som har levert dene programvaren." #: constants.py:85 #, python-format msgid " against anaconda at %s" msgstr " for anaconda på %s" #: gui.py:110 msgid "An error occurred saving screenshots to disk." msgstr "En feil oppstod under kopiering av skjermdump til disk." #: gui.py:121 msgid "Screenshots Copied" msgstr "Skjermdump kopiert" #: gui.py:122 msgid "" "The screenshots have been saved in the directory:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "You can access these when you reboot and login as root." msgstr "" "Skjermdumpene er lagret i katalogen:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "Du har tilgang til disse når du starter på nytt og logger inn som root." #: gui.py:165 msgid "Saving Screenshot" msgstr "Lagrer skjermdump" #: gui.py:166 #, python-format msgid "A screenshot named '%s' has been saved." msgstr "Et skjermdump med navn «%s» er lagret." #: gui.py:169 msgid "Error Saving Screenshot" msgstr "Feil under lagring av skjermdump" #: gui.py:170 msgid "" "An error occurred while saving the screenshot. If this occurred during " "package installation, you may need to try several times for it to succeed." msgstr "" "En feil oppstod under lagring av skjermdumpet. Hvis dette skjedde under " "installasjon av pakker, vil du kanskje måtte prøve flere ganger før det " "virker." #: gui.py:511 msgid "Installation Key" msgstr "Installasjonsnøkkel" #: gui.py:582 text.py:150 msgid "" "Choose a passphrase for the encrypted devices. You will be prompted for this " "passphrase during system boot." msgstr "" "Velg et passord for krypterte enheter. Du vil bli spurt om dette passordet " "når systemet startes." #: gui.py:601 gui.py:609 text.py:188 text.py:198 msgid "Error with passphrase" msgstr "Feil med passord" #: gui.py:602 text.py:189 msgid "The passphrases you entered were different. Please try again." msgstr "Passordene du skrev inn var forskjellige. Vennligst forsøk igjen." #: gui.py:610 msgid "The passphrase must be at least eight characters long." msgstr "Passordet må være minst åtte tegn langt." #: gui.py:644 text.py:226 #, python-format msgid "" "Device %s is encrypted. In order to access the device's contents during " "installation you must enter the device's passphrase below." msgstr "" #: gui.py:735 gui.py:1406 partIntfHelpers.py:157 partIntfHelpers.py:342 #: text.py:101 text.py:102 iw/account_gui.py:130 loader/dirbrowser.c:129 #: loader/driverdisk.c:423 loader/kickstart.c:328 loader/loader.c:465 #: loader/loader.c:577 textw/constants_text.py:48 msgid "Cancel" msgstr "Avbryt" #: gui.py:747 gui.py:748 gui.py:864 gui.py:865 ui/anaconda.glade.h:3 msgid "_Debug" msgstr "_Feilsøk" #: gui.py:1104 text.py:487 #, python-format msgid "" "Error processing drive:\n" "\n" "%(path)s\n" "%(size)-0.fMB\n" "%(description)s\n" "\n" "This device may need to be reinitialized.\n" "\n" "REINITIALIZING WILL CAUSE ALL DATA TO BE LOST!\n" "\n" "This action may also be applied to all other disks needing reinitialization." "%(details)s" msgstr "" #: gui.py:1113 gui.py:1171 text.py:496 text.py:554 msgid "_Ignore" msgstr "_Ignorer" #: gui.py:1114 gui.py:1172 text.py:497 text.py:555 #, fuzzy msgid "Ignore _all" msgstr "_Ignorer alle" #: gui.py:1115 gui.py:1173 text.py:498 text.py:556 msgid "_Re-initialize" msgstr "_Re-initier" #: gui.py:1116 gui.py:1174 text.py:499 text.py:557 #, fuzzy msgid "Re-ini_tialize all" msgstr "_Re-initier" #: gui.py:1164 text.py:547 #, python-format msgid "" "Error processing LVM.\n" "There is inconsistent LVM data on %(msg)s. You can reinitialize all related " "PVs (%(pvs)s) which will erase the LVM metadata, or ignore which will " "preserve the contents. This action may also be applied to all other PVs " "with inconsistent metadata." msgstr "" #: gui.py:1196 text.py:394 msgid "Error Parsing Kickstart Config" msgstr "Feil under lesing av kickstart-konfigurasjon" #: gui.py:1224 msgid "default:LTR" msgstr "default:LTR" #: gui.py:1304 text.py:622 msgid "Error!" msgstr "Feil!" #: gui.py:1305 text.py:623 #, python-format msgid "" "An error occurred when attempting to load an installer interface component.\n" "\n" "className = %s" msgstr "" "En feil oppstod ved forsøk på å laste en grensesnittkomponent for " "installasjonsprogrammet.\n" "\n" "className = %s" #: gui.py:1310 gui.py:1314 image.py:164 image.py:194 packages.py:328 #: storage/__init__.py:1784 msgid "_Exit" msgstr "A_vslutt" #: gui.py:1311 image.py:164 image.py:194 livecd.py:205 yuminstall.py:802 #: yuminstall.py:1186 yuminstall.py:1239 yuminstall.py:1446 msgid "_Retry" msgstr "P_røv igjen" #: gui.py:1313 msgid "The installer will now exit." msgstr "Installasjonsprogrammet avsluttes nå." #: gui.py:1316 msgid "Exiting" msgstr "Avslutter" #: gui.py:1403 livecd.py:126 text.py:271 upgrade.py:228 gentoo/livecd.py:69 msgid "Exit installer" msgstr "Avslutt installering" #: gui.py:1404 msgid "Are you sure you wish to exit the installer?" msgstr "Er du sikker på at du vil avslutte installasjonen?" #: gui.py:1413 #, python-format msgid "%s Installer" msgstr "%s installering" #: gui.py:1419 msgid "Unable to load title bar" msgstr "Kunne ikke laste tittellinjen" #: gui.py:1487 msgid "Install Window" msgstr "Installasjonsvindu" #: image.py:83 #, python-format msgid "" "The ISO image %s has a size which is not a multiple of 2048 bytes. This may " "mean it was corrupted on transfer to this computer.\n" "\n" "It is recommended that you exit and abort your installation, but you can " "choose to continue if you think this is in error." msgstr "" "ISO-bildefilen %s har en størrelse som ikke er delbar med 2048 bytes. Dette " "kan bety at den har blitt ødelagt da den ble kopiert til denne maskinen.\n" "\n" "Det er anbefalt at du avslutter og avbryter installasjonen, men du kan velge " "å fortsette hvis du tror dette er en feil." #: image.py:156 msgid "Couldn't Mount ISO Source" msgstr "Kunne ikke montere opp ISO-bildefil" #: image.py:157 #, python-format msgid "" "An error occurred mounting the source device %s. This may happen if your " "ISO images are located on an advanced storage device like LVM or RAID, or if " "there was a problem mounting a partition. Click exit to abort the " "installation." msgstr "" "En feil oppsto under montering av kildeenheten %s. Dette kan oppstå hvis " "dine ISO-bildefiler er lagret på avanserte lagringsenheter som LVM eller " "RAID, eller hvis det oppsto et problem under montering av en partisjon. " "Trykk på «Avslutt» for å avbryte installasjonen." #: image.py:185 msgid "Missing ISO 9660 Image" msgstr "Mangler ISO 9660-avtrykk" #: image.py:186 #, fuzzy, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the hard " "drive.\n" "\n" "Please copy this image to the drive and click Retry. Click Exit to abort " "the installation." msgstr "" "Installasjonen har prøvd å montere bildefilen #%s, men kan ikke finne det på " "harddisken.\n" "\n" "Vennligst kopier dette bildet til harddisken og klikk «Prøv på nytt». Klikk " "«Avslutt» for å avbryte installasjonen." #: image.py:241 msgid "Required Install Media" msgstr "Krav til installasjonsmedie" #: image.py:242 #, fuzzy, python-format msgid "" "The software you have selected to install will require the following " "%(productName)s %(productVersion)s discs:\n" "\n" "%(reqcdstr)s\n" "Please have these ready before proceeding with the installation. If you " "need to abort the installation and exit please select \"Reboot\"." msgstr "" "Programvaren du har valgt for installasjon vil kreve følgende CDer:\n" "\n" "%s\n" "Vennligst ha disse klar før du fortsetter med installasjonen. Hvis du må " "avbryte installasjonen og avslutte, vennligst trykk på «Start på nytt»." #: image.py:251 packages.py:332 yuminstall.py:1487 msgid "_Reboot" msgstr "Sta_rt på nytt" #: image.py:251 livecd.py:406 packages.py:332 upgrade.py:236 yuminstall.py:930 #: yuminstall.py:1016 yuminstall.py:1427 yuminstall.py:1469 yuminstall.py:1487 #: ui/anaconda.glade.h:2 gentoo/livecd.py:482 msgid "_Back" msgstr "Til_bake" #: image.py:290 #, python-format msgid "" "An error occurred unmounting the disc. Please make sure you're not " "accessing %s from the shell on tty2 and then click OK to retry." msgstr "" "En feil oppstod ved avmontering av CDen. Sjekk at du ikke aksesserer %s fra " "skallet på tty2 og trykk deretter «OK» for å forsøke på nytt." #: installclass.py:71 msgid "Install on System" msgstr "Installer på systemet" #: installinterfacebase.py:42 #, python-format msgid "" "Disk %s contains BIOS RAID metadata, but is not part of any recognized BIOS " "RAID sets. Ignoring disk %s." msgid_plural "" "Disks %s contain BIOS RAID metadata, but are not part of any recognized BIOS " "RAID sets. Ignoring disks %s." msgstr[0] "" msgstr[1] "" #: iutil.py:816 #, python-format msgid "" "Error: On open, cannot set reIPL method to %(reipl_type)s (%(filename)s: " "%(e)s)" msgstr "" #: iutil.py:827 #, python-format msgid "" "Error: On write, cannot set reIPL method to %(reipl_type)s (%(filename)s: " "%(e)s)" msgstr "" #: iutil.py:836 #, python-format msgid "" "Error: On close, cannot set reIPL method to %(reipl_type)s (%(filename)s: " "%(e)s)" msgstr "" #: iutil.py:855 #, python-format msgid "Error: Could not set %(device)s as reIPL device (%(e)s)" msgstr "" #: iutil.py:865 #, python-format msgid "Error: Could not reset loadparm (%s)" msgstr "" #: iutil.py:874 #, python-format msgid "Warning: Could not reset parm (%s)" msgstr "" #: iutil.py:887 #, python-format msgid "" "After shutdown, please perform a manual IPL from DASD device %s to continue " "installation" msgstr "" #: iutil.py:909 #, python-format msgid "Error: reading FCP property %(syspath_property)s for reIPL (%(e)s)" msgstr "" #: iutil.py:924 #, python-format msgid "Error: writing FCP property %(reipl_property)s for reIPL (%(e)s)" msgstr "" #: iutil.py:939 #, python-format msgid "" "Error: writing default FCP property %(reipl_property)s for reIPL (%(e)s)" msgstr "" #: iutil.py:954 #, python-format msgid "" "After shutdown, please perform a manual IPL from FCP %(device)s with WWPN " "%(wwpn)s and LUN %(lun)s to continue installation" msgstr "" #: iutil.py:971 msgid "" "After shutdown, please perform a manual IPL from the device now containing /" "boot to continue installation" msgstr "" #: iutil.py:982 #, fuzzy msgid "Error determining boot device's disk name" msgstr "Feil ved bestemming av type monteringspunkt" #: iutil.py:986 msgid "The mount point /boot or / is on a disk that we are not familiar with" msgstr "" #: kickstart.py:115 #, fuzzy, python-format msgid "" "There was an error running the kickstart script at line %(lineno)s. You may " "examine the output in %(msgs)s. This is a fatal error and installation will " "be aborted. Press the OK button to exit the installer." msgstr "" "Det oppsto en feil ved kjøring av kickstart-skriptet på linje %s. Du kan " "undersøke meldingen i %s. Dette er en alvorlig feil og installasjonen vil " "bli avbrutt. Trykk OK for å avslutte installasjonsprogrammet." #: kickstart.py:123 kickstart.py:125 msgid "Scriptlet Failure" msgstr "Feil med skript" #: kickstart.py:150 rescue.py:248 yuminstall.py:698 yuminstall.py:1164 #: iw/task_gui.py:308 msgid "No Network Available" msgstr "Nettverk er ikke tilgjengelig" #: kickstart.py:151 msgid "" "Encryption key escrow requires networking, but there was an error enabling " "the network on your system." msgstr "" #: kickstart.py:164 #, fuzzy, python-format msgid "" "The following error was encountered while downloading the escrow " "certificate:\n" "\n" "%s" msgstr "" "Følgende feil ble funnet under lesing av din kickstart-konfigurasjon:\n" "\n" "%s" #: kickstart.py:1233 #, python-format msgid "Error processing %%ksappend lines: %s" msgstr "Feil under prosessering av %%ksappend-linjer: %s" #: kickstart.py:1236 #, python-format msgid "Unknown error processing %%ksappend lines: %s" msgstr "Ukjent feil under prosessering av %%ksappend linjer: %s" #: kickstart.py:1291 livecd.py:229 msgid "Post-Installation" msgstr "Etter installasjon" #: kickstart.py:1292 msgid "Running post-installation scripts" msgstr "Kjører skript etter installasjon" #: kickstart.py:1308 msgid "Pre-Installation" msgstr "Før installasjon" #: kickstart.py:1309 msgid "Running pre-installation scripts" msgstr "Kjører skript før installasjon" #: kickstart.py:1341 msgid "Missing Package" msgstr "Manglende pakke" #: kickstart.py:1342 #, fuzzy, python-format msgid "" "You have specified that the package '%s' should be installed. This package " "does not exist. Would you like to continue or abort this installation?" msgstr "" "Du har oppgitt en at pakken '%s' skal installeres. Denne pakken finnes ikke. " "Ønsker du å fortsette installasjonen?" #: kickstart.py:1348 kickstart.py:1387 msgid "_Abort" msgstr "_Avbryt" #: kickstart.py:1349 kickstart.py:1388 msgid "_Ignore All" msgstr "_Ignorer alle" #: kickstart.py:1379 msgid "Missing Group" msgstr "Manglende gruppe" #: kickstart.py:1380 #, fuzzy, python-format msgid "" "You have specified that the group '%s' should be installed. This group does " "not exist. Would you like to continue or abort this installation?" msgstr "" "Du har oppgitt at gruppen «%s» skal installeres. Denne gruppen eksisterer " "ikke. Vil du fortsette eller avbryte installasjonen?" #: kickstart.py:1495 #, python-format msgid "" "The kickstart configuration file is missing required information that " "anaconda cannot prompt for. Please add the following sections and try " "again:\n" "%s" msgstr "" #: livecd.py:121 gentoo/livecd.py:64 msgid "Unable to find image" msgstr "Fant ikke bilde" #: livecd.py:122 #, python-format msgid "" "The given location isn't a valid %s live CD to use as an installation source." msgstr "" "Den angitte plassen er ikke en gyldig %s live-CD for å bruke som " "installasjonskilde." #: livecd.py:180 msgid "Copying live image to hard drive." msgstr "Overfører installasjonsbildet til harddisken..." #: livecd.py:199 #, fuzzy msgid "" "There was an error installing the live image to your hard drive. This could " "be due to bad media. Please verify your installation media.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "require reinstallation." msgstr "" "Filen %s kan ikke åpnes. Årsaken er at filen mangler, pakken er korrupt " "eller mediet er dårlig. Vennligst sjekk kilden for installasjonen.\n" "\n" "Hvis du avslutter, vil systemet ditt være i en inkonsistent tilstand som " "sannsynligvis vil kreve at det installeres på nytt.\n" "\n" #: livecd.py:230 #, fuzzy msgid "" "Performing post-installation filesystem changes. This may take several " "minutes." msgstr "" "Utfører endringer i filsystemet etter installasjon. Dette kan ta flere " "minutter..." #: livecd.py:401 gentoo/livecd.py:477 #, python-format msgid "" "The root filesystem you created is not large enough for this live image " "(%.2f MB required)." msgstr "" "Rotfilsystemet tu laget er ikke stort nok for dette bildet (%.2f MB kreves)." #: network.py:56 msgid "Hostname must be 255 or fewer characters in length." msgstr "Vertsnavnet må være maksimum 255 tegn langt." #: network.py:62 msgid "" "Hostname must start with a valid character in the ranges 'a-z', 'A-Z', or " "'0-9'" msgstr "" "Vertsnavnet på begynne med et gyldig tegn i området «a-z», «A-Z» eller «0-9»" #: network.py:67 msgid "" "Hostnames can only contain the characters 'a-z', 'A-Z', '0-9', '-', or '.'" msgstr "Vertsnavn kan kun inneholde tegnene «a-z», «A-Z», «0-9», «-» eller «.»" #: network.py:180 msgid "IP address is missing." msgstr "IP-adresse mangler." #: network.py:184 msgid "" "IPv4 addresses must contain four numbers between 0 and 255, separated by " "periods." msgstr "" "IPv4-adresser må inneholde fire tall mellom 0 og 255, adskilt med punktum." #: network.py:187 #, python-format msgid "'%s' is not a valid IPv6 address." msgstr "«%s» er ikke en gyldig IPv6-adresse." #: network.py:189 #, python-format msgid "'%s' is an invalid IP address." msgstr "«%s» er ikke en gyldig IP-adresse." #: packages.py:111 msgid "Resizing Failed" msgstr "Endring av størrelse feilet" #: packages.py:112 #, python-format msgid "There was an error encountered while resizing the device %s." msgstr "Det oppsto en feil under endring av størrelse på enhet %s." #: packages.py:120 msgid "Migration Failed" msgstr "Migrering feilet" #: packages.py:121 #, fuzzy, python-format msgid "An error was encountered while migrating filesystem on device %s." msgstr "Det oppsto en feil under endring av størrelse på enhet %s." #: packages.py:130 msgid "_File Bug" msgstr "_Rapporter feil" #: packages.py:312 packages.py:333 msgid "Warning! This is pre-release software!" msgstr "Advarsel! Dette er en ikke ferdig utprøvet programvare!" #: packages.py:313 #, fuzzy, python-format msgid "" "Thank you for downloading this pre-release of %(productName)s.\n" "\n" "This is not a final release and is not intended for use on production " "systems. The purpose of this release is to collect feedback from testers, " "and it is not suitable for day to day usage.\n" "\n" "To report feedback, please visit:\n" "\n" " %(bugzillaUrl)s\n" "\n" "and file a report against '%(fileagainst)s'.\n" msgstr "" "Takk for at du lastet ned denne testversjonen av %s.\n" "\n" "Dette er ikke en ferdig versjon og er ikke ment for bruk på systemer som er " "i produksjon. Målet med denne versjonen er å samle tilbakemeldinger fra " "testere, og den er ikke passende for daglig bruk.\n" "\n" "For å rapportere tilbake gå til:\n" "\n" " %s\n" "\n" "og send inn en rapport under «%s».\n" #: packages.py:328 msgid "_Install anyway" msgstr "_Installer likevel" #: packages.py:331 msgid "Your system will now be rebooted..." msgstr "Maskinen vil nå startes på nytt..." #: partIntfHelpers.py:41 msgid "Please enter a volume group name." msgstr "Vennligst oppgi et gruppenavn for volumet." #: partIntfHelpers.py:45 msgid "Volume Group Names must be less than 128 characters" msgstr "Gruppenavn for volumer må være mindre enn 128 tegn" #: partIntfHelpers.py:48 #, python-format msgid "Error - the volume group name %s is not valid." msgstr "Feil - gruppenavn for volum, %s, er ikke gyldig." #: partIntfHelpers.py:53 msgid "" "Error - the volume group name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Feil - gruppenavn for volum inneholder ugyldige tegn eller mellomrom.\n" "Gyldige tegn er bokstaver, tall «.» eller «_»." #: partIntfHelpers.py:63 msgid "Please enter a logical volume name." msgstr "Vennligst oppgi navn på logisk volum." #: partIntfHelpers.py:67 msgid "Logical Volume Names must be less than 128 characters" msgstr "Navn på logiske volum må være mindre enn 128 tegn" #: partIntfHelpers.py:71 #, python-format msgid "Error - the logical volume name %s is not valid." msgstr "Feil - navn på logisk volum, %s, er ikke gyldig." #: partIntfHelpers.py:77 msgid "" "Error - the logical volume name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Feil - navn på logisk volum inneholder ugyldige tegn eller mellomrom.\n" "Gyldige tegn er bokstaver, tall, «.» eller «_»." #: partIntfHelpers.py:101 #, python-format msgid "" "The mount point %s is invalid. Mount points must start with '/' and cannot " "end with '/', and must contain printable characters and no spaces." msgstr "" "Monteringspunktet %s er ugyldig. Monteringspunkter må begynne med «/», kan " "ikke slutte med «/», og må bare inneholde gyldige tegn uten mellomrom." #: partIntfHelpers.py:108 msgid "Please specify a mount point for this partition." msgstr "Spesifiser et monteringspunkt for denne partisjonen." #: partIntfHelpers.py:121 partIntfHelpers.py:128 msgid "Unable To Delete" msgstr "Kan ikke slette" #: partIntfHelpers.py:122 msgid "You must first select a partition to delete." msgstr "Du må først velge en partisjon som skal slettes." #: partIntfHelpers.py:153 partIntfHelpers.py:341 iw/lvm_dialog_gui.py:862 msgid "Confirm Delete" msgstr "Bekreft sletting" #: partIntfHelpers.py:154 #, fuzzy, python-format msgid "You are about to delete all partitions on the device '%s'." msgstr "Du er i ferd med å slette alle partisjoner på enheten «/dev/%s»." #: partIntfHelpers.py:157 partIntfHelpers.py:342 iw/lvm_dialog_gui.py:865 #: iw/lvm_dialog_gui.py:1434 iw/osbootwidget.py:104 iw/partition_gui.py:1816 #: iw/partition_gui.py:1828 msgid "_Delete" msgstr "_Slett" #: partIntfHelpers.py:204 msgid "Notice" msgstr "Melding" #: partIntfHelpers.py:205 #, python-format msgid "" "The following partitions were not deleted because they are in use:\n" "\n" "%s" msgstr "" "Følgende partisjoner ble ikke slettet fordi de er i bruk:\n" "\n" "%s" #: partIntfHelpers.py:220 msgid "Format as Swap?" msgstr "Formater som swap?" #: partIntfHelpers.py:221 #, fuzzy, python-format msgid "" "%s has a partition type of 0x82 (Linux swap) but does not appear to be " "formatted as a Linux swap partition.\n" "\n" "Would you like to format this partition as a swap partition?" msgstr "" "/dev/%s har partisjonstype 0x82 (Linux swap), men ser ikke ut til å være " "formatert som en swappartisjon.\n" "\n" "Ønsker du å formatere denne partisjonen som en swappartisjon?" #: partIntfHelpers.py:236 #, python-format msgid "You need to select at least one hard drive to install %s." msgstr "Du må velge minst en harddisk du vil installere %s på." #: partIntfHelpers.py:241 msgid "" "You have chosen to use a pre-existing partition for this installation " "without formatting it. We recommend that you format this partition to make " "sure files from a previous operating system installation do not cause " "problems with this installation of Linux. However, if this partition " "contains files that you need to keep, such as home directories, then " "continue without formatting this partition." msgstr "" "Du har valgt å bruke en eksisterende partisjonen for denne installasjonen " "uten å formatere den. Det anbefales at du formaterer denne partisjonen for å " "unngå at filer fra et tidligere installert operativsystem skaper problemer " "for denne installasjonen av Linux. Hvis denne partisjonen inneholder filer " "du ønsker å beholde, slik som hjemmekateloger for brukere, bør du velge å " "fortsette uten å formattere denne partisjonen." #: partIntfHelpers.py:249 msgid "Format?" msgstr "Formatere?" #: partIntfHelpers.py:249 iw/partition_gui.py:1601 msgid "_Modify Partition" msgstr "_Endre partisjon" #: partIntfHelpers.py:249 msgid "Do _Not Format" msgstr "_Ikke formater" #: partIntfHelpers.py:257 msgid "Error with Partitioning" msgstr "Feil under partisjonering" #: partIntfHelpers.py:258 #, fuzzy, python-format msgid "" "The following critical errors exist with your requested partitioning scheme. " "These errors must be corrected prior to continuing with your install of " "%(productName)s.\n" "\n" "%(errorstr)s" msgstr "" "Følgende kritiske feil oppsto for ditt forespurte partisjonsopplegg. Disse " "feilene må rettes opp før du fortsetter med installasjonen av %s\n" "\n" "%s" #: partIntfHelpers.py:274 msgid "Partitioning Warning" msgstr "Advarsel fra partisjonering" #: partIntfHelpers.py:275 #, python-format msgid "" "The following warnings exist with your requested partition scheme.\n" "\n" "%s\n" "\n" "Would you like to continue with your requested partitioning scheme?" msgstr "" "Følgende advarsler oppstod med ditt partisjoneringsopplegg.\n" "\n" "%s\n" "\n" "Vil du fortsette med det forespurte partisjoneringsopplegget?" #: partIntfHelpers.py:289 msgid "" "The following pre-existing partitions have been selected to be formatted, " "destroying all data." msgstr "" "Disse eksisterende partisjonene er merket for formatering, som vil ødelegge " "alle data." #: partIntfHelpers.py:292 msgid "" "Select 'Yes' to continue and format these partitions, or 'No' to go back and " "change these settings." msgstr "" "Velg 'Ja' for å fortsette med formatering av disse partisjonene, eller 'Nei' " "for å tilbake og endre disse innstillingene." #: partIntfHelpers.py:298 msgid "Format Warning" msgstr "Formateringsadvarsel" #: partIntfHelpers.py:325 #, python-format msgid "" "You are about to delete the volume group \"%s\".\n" "\n" "ALL logical volumes in this volume group will be lost!" msgstr "" "Du er i ferd med å slette volumgruppen «%s».\n" "\n" "ALLE logisske volum i denne volumgruppen vil gå tapt!" #: partIntfHelpers.py:329 #, python-format msgid "You are about to delete the logical volume \"%s\"." msgstr "Du er i ferd med å slette logisk volum «%s»." #: partIntfHelpers.py:332 msgid "You are about to delete a RAID device." msgstr "Du er i ferd med å slette en RAID-enhet." #: partIntfHelpers.py:334 #, fuzzy, python-format msgid "You are about to delete the %s partition." msgstr "Du er i ferd med å slette partisjonen /dev/%s." #: partIntfHelpers.py:338 #, fuzzy, python-format msgid "You are about to delete the %(type)s %(name)s" msgstr "Du er i ferd med å slette partisjonen /dev/%s." #: partIntfHelpers.py:349 msgid "Confirm Reset" msgstr "Bekreft nullstilling" #: partIntfHelpers.py:350 msgid "" "Are you sure you want to reset the partition table to its original state?" msgstr "" "Er du sikker på at du vil nullstille partisjonstabellen til opprinnelig " "tilstand?" #: platform.py:98 platform.py:344 platform.py:412 platform.py:520 #: ui/create-storage.glade.h:17 msgid "RAID Device" msgstr "RAID-enhet" #: platform.py:99 platform.py:102 platform.py:345 platform.py:413 #: platform.py:521 platform.py:524 msgid "Master Boot Record (MBR)" msgstr "Master Boot Record (MBR)" #: platform.py:101 platform.py:523 msgid "First sector of boot partition" msgstr "Første sektor på oppstartspartisjonen" #: platform.py:113 #, fuzzy msgid "You have not created a bootable partition." msgstr "Du må opprette en PReP-oppstartspartisjon for PPC." #: platform.py:118 msgid "Bootable partitions cannot be on a RAID device." msgstr "Oppstartbare partisjoner kan ikke plasseres på RAID-enheter." #: platform.py:120 msgid "Bootable partitions can only be on RAID1 devices." msgstr "Oppstartbare partisjoner kan kun plasseres på RAID1-enheter." #: platform.py:124 msgid "Bootable RAID1 set members must be partitions." msgstr "" #: platform.py:129 msgid "Bootable partitions cannot be on a logical volume." msgstr "Oppstartbare partisjoner kan ikke ligge på et logisk volum." #: platform.py:136 #, python-format msgid "Bootable partitions cannot be on an %s filesystem." msgstr "Oppstartbare partisjoner kan ikke ligge på et filsystem av type %s." #: platform.py:140 platform.py:145 msgid "Bootable partitions cannot be on an encrypted block device" msgstr "Oppstartbare partisjoner kan ikke ligge på en kryptert blokkenhet." #: platform.py:217 msgid "EFI System Partition" msgstr "EFI systempartisjon" #: platform.py:229 #, fuzzy msgid "You have not created a /boot/efi partition." msgstr "Du må opprette en PReP-oppstartspartisjon for PPC." #: platform.py:235 msgid "/boot/efi is not EFI." msgstr "/boot/efi er ikke EFI." #: platform.py:251 #, fuzzy, python-format msgid "%s must have a %s disk label." msgstr "%s må ha en ugyldig disketikett." #: platform.py:289 #, python-format msgid "%s must have a bsd disk label." msgstr "%s må ha en ugyldig disketikett." #: platform.py:301 #, python-format msgid "The disk %s requires at least 1MB of free space at the beginning." msgstr "Disken %s krever minst 1MB ledig plass i starten." #: platform.py:347 msgid "PPC PReP Boot" msgstr "PPC PReP oppstart" #: platform.py:363 #, fuzzy msgid "The boot partition must be within the first 4MB of the disk." msgstr "Det oppsto et problem under skriving av systemets tilstand til disk." #: platform.py:415 platform.py:418 msgid "Apple Bootstrap" msgstr "Apple bootstrap" #: platform.py:432 #, python-format msgid "%s must have a mac disk label." msgstr "%s må ha en mac disketikett." #: rescue.py:207 msgid "When finished please exit from the shell and your system will reboot." msgstr "Avslutt skallet når du er ferdig for å starte systemet på nytt." #: rescue.py:221 msgid "Unable to find /bin/sh to execute! Not starting shell" msgstr "Kan ikke finne /bin/sh for kjøring! Starter ikke skall" #: rescue.py:240 msgid "Setup Networking" msgstr "Oppsett av nettverk" #: rescue.py:241 msgid "Do you want to start the network interfaces on this system?" msgstr "Ønsker du å starte nettverksgrensesnittene på dette systemet?" #: rescue.py:242 loader/driverdisk.c:666 loader/driverdisk.c:676 #: loader/hdinstall.c:206 textw/constants_text.py:56 gentoo/utils.py:928 #: gentoo/utils.py:1172 msgid "Yes" msgstr "Ja" #: rescue.py:242 rescue.py:244 loader/driverdisk.c:666 loader/driverdisk.c:676 #: textw/constants_text.py:60 gentoo/utils.py:928 gentoo/utils.py:1172 msgid "No" msgstr "Nei" #: rescue.py:249 msgid "" "Unable to activate a networking device. Networking will not be available in " "rescue mode." msgstr "" #: rescue.py:284 rescue.py:353 rescue.py:364 rescue.py:449 msgid "Rescue" msgstr "Redning" #: rescue.py:285 #, python-format msgid "" "The rescue environment will now attempt to find your Linux installation and " "mount it under the directory %s. You can then make any changes required to " "your system. If you want to proceed with this step choose 'Continue'. You " "can also choose to mount your file systems read-only instead of read-write " "by choosing 'Read-Only'.\n" "\n" "If for some reason this process fails you can choose 'Skip' and this step " "will be skipped and you will go directly to a command shell.\n" "\n" msgstr "" "Feilrettingsmiljøet vil nå forsøke å finne din Linux installasjon og montere " "den under katalogen %s. Du kan da utføre nødvendige endringer på systemet. " "Hvis du vil fortsette med denne oppgaven velg «Fortsett». Du kan også velge " "å montere filsystemet skrivebeskyttet (kun lesbart).\n" "\n" "Hvis denne prosessen feiler av noen grunn kan du velge «Hopp over» så vil " "dette steget bli utelatt og du vil gå direkte til et kommandoskall.\n" "\n" #: rescue.py:295 iw/partition_gui.py:781 loader/cdinstall.c:206 #: loader/cdinstall.c:214 loader/driverdisk.c:627 storage/__init__.py:157 #: storage/devicetree.py:90 msgid "Continue" msgstr "Fortsett" #: rescue.py:295 rescue.py:300 msgid "Read-Only" msgstr "Kun lesbart" #: rescue.py:295 rescue.py:297 loader/cdinstall.c:248 loader/cdinstall.c:251 #: loader/method.c:324 storage/__init__.py:1784 textw/upgrade_text.py:139 msgid "Skip" msgstr "Hopp over" #: rescue.py:329 msgid "System to Rescue" msgstr "System som skal reddes" #: rescue.py:330 #, fuzzy msgid "Which device holds the root partition of your installation?" msgstr "Hvilken partisjon inneholder rotpartisjonen til din installasjon?" #: rescue.py:332 rescue.py:336 text.py:627 text.py:629 #: textw/complete_text.py:31 msgid "Exit" msgstr "Avslutt" #: rescue.py:354 msgid "" "Your system had dirty file systems which you chose not to mount. Press " "return to get a shell from which you can fsck and mount your partitions. " "The system will reboot automatically when you exit from the shell." msgstr "" "Ditt system har filsystemer som ikke er tatt ned kontrollert og som du " "valgte ikke å montere. Trykk linjeskift for å starte et skall der du kan " "kjøre filsystemsjekk og montere dine partisjoner. Systemet vil starte på " "nytt når du avslutter skallet." #: rescue.py:365 #, fuzzy, python-format msgid "" "Your system has been mounted under %(rootPath)s.\n" "\n" "Press to get a shell. If you would like to make your system the " "root environment, run the command:\n" "\n" "\tchroot %(rootPath)s\n" "\n" "The system will reboot automatically when you exit from the shell." msgstr "" "Ditt system ble montert under %s.\n" "\n" "Trykk for å starte et skall. Hvis du vil gjøre ditt system til " "rot-miljøet, kjør kommandoen:\n" "\n" "chroot %s\n" "\n" "Systemet vil starte på nytt automatisk når du avslutter skallet." #: rescue.py:450 #, python-format msgid "" "An error occurred trying to mount some or all of your system. Some of it may " "be mounted under %s.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "En feil oppsto under forsøk på å montere deler av, eller hele systemet. " "Deler kan være montert under %s.\n" "\n" "Trykk for å få et skall. Systemet vil starte på nytt automatisk " "når du avslutter skallet." #: rescue.py:459 msgid "You don't have any Linux partitions. Rebooting.\n" msgstr "Du har ingen Linux-partisjoner. Starter på nytt.\n" #: rescue.py:462 msgid "Rescue Mode" msgstr "Redningsmodus" #: rescue.py:463 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "Du har ingen Linux-partisjoner. Trykk for å gå til et skall. " "Systemet vil starte på nytt når du avslutter skallet." #: rescue.py:476 #, python-format msgid "Your system is mounted under the %s directory." msgstr "Systemet er montert under katalogen %s." #: text.py:155 msgid "Passphrase for encrypted device" msgstr "Passord for kryptert enhet" #: text.py:168 #, fuzzy msgid "Also add this passphrase to all existing encrypted devices" msgstr "Bruk dette passordet for alle nye krypterte enheter" #: text.py:199 #, fuzzy, python-format msgid "The passphrase must be at least %d character long." msgid_plural "The passphrase must be at least %d characters long." msgstr[0] "Passordet må være minst åtte tegn langt." msgstr[1] "Passordet må være minst åtte tegn langt." #: text.py:233 ui/lukspassphrase.glade.h:6 msgid "Passphrase" msgstr "Passord" #: text.py:241 ui/lukspassphrase.glade.h:7 msgid "This is a global passphrase" msgstr "Dette er et globalt passord" #: text.py:356 text.py:360 msgid "Repository editing is not available in text mode." msgstr "Redigering av lager er ikke tilgjengelig i tekstmodus." #: text.py:422 #, fuzzy, python-format msgid "Welcome to %(productName)s for %(productArch)s" msgstr "Velkommen til %s for %s" #: text.py:424 #, python-format msgid "Welcome to %s" msgstr "Velkommen til %s" #: text.py:426 msgid "" " / between elements | selects | next " "screen" msgstr "" " /Alt-Tab> mellom elementer | velger | neste " "skjerm " #: text.py:627 loader/net.c:109 loader/net.c:470 loader/net.c:525 #: loader/net.c:667 loader/net.c:675 loader/net.c:1096 loader/net.c:1104 msgid "Retry" msgstr "Prøv igjen" #: text.py:653 msgid "Cancelled" msgstr "Avbrutt" #: text.py:654 msgid "I can't go to the previous step from here. You will have to try again." msgstr "Kan ikke gå tilbake til forrige steg herfra. Du må forsøke igjen." #: upgrade.py:49 msgid "Proceed with upgrade?" msgstr "Gå videre med oppgradering?" #: upgrade.py:50 msgid "" "The file systems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" "Filsystemene på Linux-systemet du har valgt å oppgradere er allerede " "montert. Du kan ikke gå lengre tilbake enn dette.\n" #: upgrade.py:54 msgid "Would you like to continue with the upgrade?" msgstr "Vil du fortsette med oppgradering?" #: upgrade.py:215 msgid "Mount failed" msgstr "Montering feilet" #: upgrade.py:216 #, fuzzy, python-format msgid "" "The following error occurred when mounting the file systems listed in /etc/" "fstab. Please fix this problem and try to upgrade again.\n" "%s" msgstr "" "Ett eller flere av filsystemene som er listet i /etc/fstab på ditt Linux-" "system kan ikke monteres. Rett opp dette problemet og forsøk å oppgradere " "igjen." #: upgrade.py:224 upgrade.py:231 #, fuzzy msgid "Upgrade root not found" msgstr "Konfigurasjon av oppstartslaster under oppgradering" #: upgrade.py:225 msgid "The root for the previously installed system was not found." msgstr "Roten for tidligere installert system ble ikke funnet." #: upgrade.py:232 msgid "" "The root for the previously installed system was not found. You can exit " "installer or backtrack to choose installation instead of upgrade." msgstr "" #: upgrade.py:255 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" "Følgende filer er absolutte symbolske lenker, noe som ikke støttes under " "oppgradering. Du må endre dem til relative symbolske lenker og starte " "oppgraderingen på nytt.\n" "\n" #: upgrade.py:261 msgid "Absolute Symlinks" msgstr "Absolutte symbolske lenker" #: upgrade.py:272 msgid "" "The following are directories which should instead be symbolic links, which " "will cause problems with the upgrade. Please return them to their original " "state as symbolic links and restart the upgrade.\n" "\n" msgstr "" "Følgende kataloger skulle ha vært symbolske lenker og dette kan skape " "problemer under oppgradering. Du må endre dem tilbake til symbolske lenker " "og starte oppgraderingen på nytt.\n" "\n" #: upgrade.py:278 msgid "Invalid Directories" msgstr "Ugyldige kataloger" #: vnc.py:137 #, fuzzy, python-format msgid "%(productName)s %(productVersion)s installation on host %(name)s" msgstr "%s %s installasjon på vert %s" #: vnc.py:143 #, python-format msgid "%(productName)s %(productVersion)s installation" msgstr "" #: vnc.py:172 #, python-format msgid "Attempting to connect to vnc client on host %s..." msgstr "Prøver på koble til vnc-klient på vert %s..." #: vnc.py:186 msgid "Connected!" msgstr "Tilkoblet!" #: vnc.py:189 msgid "Will try to connect again in 15 seconds..." msgstr "Prøver å koble til igjen om 15 sekunder..." #: vnc.py:195 #, python-format msgid "Giving up attempting to connect after %d try!\n" msgid_plural "Giving up attempting to connect after %d tries!\n" msgstr[0] "" msgstr[1] "" #: vnc.py:206 #, python-format msgid "Please manually connect your vnc client to %s to begin the install." msgstr "" "Venligst koble din vnc-klient til %s manuelt for å starte installasjonen." #: vnc.py:208 msgid "Please manually connect your vnc client to begin the install." msgstr "" "Vennligst koble til din vnc-klient manuelt for å starte installasjonen." #: vnc.py:211 msgid "Starting VNC..." msgstr "Starter VNC..." #: vnc.py:236 msgid "The VNC server is now running." msgstr "VNC-tjeneren kjører nå." #: vnc.py:249 msgid "" "\n" "\n" "You chose to connect to a listening vncviewer. \n" "This does not require a password to be set. If you \n" "set a password, it will be used in case the connection \n" "to the vncviewer is unsuccessful\n" "\n" msgstr "" #: vnc.py:254 #, fuzzy msgid "" "\n" "\n" "WARNING!!! VNC server running with NO PASSWORD!\n" "You can use the vncpassword= boot option\n" "if you would like to secure the server.\n" "\n" msgstr "" "\n" "\n" "ADVARSEL!!! VNC-tjeneren kjører UTEN PASSORD!\n" "Du kan bruke self.password= some oppstartsflagg\n" "hvis du ønsker å sikre tjeneren.\n" "\n" #: vnc.py:258 msgid "" "\n" "\n" "You chose to execute vnc with a password. \n" "\n" msgstr "" "\n" "\n" "Du har valgt å kjøre vnc med et passord. \n" "\n" #: vnc.py:260 msgid "" "\n" "\n" "Unknown Error. Aborting. \n" "\n" msgstr "" "\n" "\n" "Ukjent feil. Avbryter.\n" "\n" #: vnc.py:282 vnc.py:375 msgid "VNC Configuration" msgstr "VNC-konfigurasjon" #: vnc.py:285 vnc.py:379 msgid "No password" msgstr "Ingen passord" #: vnc.py:287 vnc.py:382 msgid "" "A password will prevent unauthorized listeners connecting and monitoring " "your installation progress. Please enter a password to be used for the " "installation" msgstr "" "Et passord vil forhindre uautoriserte lyttere fra å koble seg til og " "overvåke din installasjon. Vennligst oppgi et passord som skal brukes for " "installasjonen." #: vnc.py:295 vnc.py:390 textw/userauth_text.py:47 textw/userauth_text.py:134 msgid "Password:" msgstr "Passord:" #: vnc.py:296 vnc.py:391 textw/userauth_text.py:49 textw/userauth_text.py:136 msgid "Password (confirm):" msgstr "Passord (bekreft):" #: vnc.py:314 vnc.py:413 textw/userauth_text.py:70 textw/userauth_text.py:162 msgid "Password Mismatch" msgstr "Passordene er ikke like" #: vnc.py:315 vnc.py:414 textw/userauth_text.py:71 textw/userauth_text.py:163 msgid "The passwords you entered were different. Please try again." msgstr "Passordene du skrev inn var forskjellige. Vennligst forsøk igjen." #: vnc.py:320 vnc.py:419 textw/userauth_text.py:66 textw/userauth_text.py:158 msgid "Password Length" msgstr "Passordlengde" #: vnc.py:321 vnc.py:420 msgid "The password must be at least six characters long." msgstr "Passordet må være minst seks tegn langt." #: vnc.py:343 msgid "Unable to Start X" msgstr "Kan ikke starte X" #: vnc.py:345 msgid "" "X was unable to start on your machine. Would you like to start VNC to " "connect to this computer from another computer and perform a graphical " "install or continue with a text mode install?" msgstr "" "X kunne ikke starte på din maskin. Vil du starte VNC for å koble denne " "maskinen til en annen datamaskin og utføre en grafisk installasjon eller vil " "du starte installasjonen i tekstmodus?" #: vnc.py:364 msgid "Start VNC" msgstr "Start VNC" #: vnc.py:365 vnc.py:367 msgid "Use text mode" msgstr "Bruker tekstmodus" #: yuminstall.py:85 #, python-format msgid "%s MB" msgstr "%s MB" #: yuminstall.py:88 #, python-format msgid "%s KB" msgstr "%s KB" #: yuminstall.py:90 #, fuzzy, python-format msgid "%s Byte" msgid_plural "%s Bytes" msgstr[0] "%s MB" msgstr[1] "%s MB" #: yuminstall.py:134 msgid "Preparing to install" msgstr "Forbereder installasjon" #: yuminstall.py:135 msgid "Preparing transaction from installation source" msgstr "Forbereder transaksjon fra installasjonskilden" #: yuminstall.py:163 #, fuzzy, python-format msgid "Installing %(pkgStr)s (%(size)s)\n" msgstr "Installerer %s (%s)\n" #: yuminstall.py:212 #, python-format msgid "Packages completed: %(donepkgs)d of %(numpkgs)d" msgid_plural "Packages completed: %(donepkgs)d of %(numpkgs)d" msgstr[0] "" msgstr[1] "" #: yuminstall.py:227 msgid "Finishing upgrade" msgstr "Fullfører oppgraderingen" #: yuminstall.py:228 #, fuzzy msgid "Finishing upgrade process. This may take a little while." msgstr "Starter installasjon. Dette kan ta flere minutter..." #: yuminstall.py:251 #, fuzzy msgid "Error Installing Package" msgstr "Installerer pakker" #: yuminstall.py:252 #, python-format msgid "" "A fatal error occurred when installing the %s package. This could indicate " "errors when reading the installation media. Installation cannot continue." msgstr "" #: yuminstall.py:353 iw/task_gui.py:321 msgid "Error Setting Up Repository" msgstr "Feil ved oppsett av lager" #: yuminstall.py:354 #, fuzzy, python-format msgid "" "The following error occurred while setting up the installation repository:\n" "\n" "%(e)s\n" "\n" "Please provide the correct information for installing %(productName)s." msgstr "" "Følgende feil oppstod under partisjonering:\n" "\n" "%s\n" "\n" "Trykk «OK» for å avslutte installasjonsprogrammet." #: yuminstall.py:398 msgid "Change Disc" msgstr "Bytt disk" #: yuminstall.py:399 #, fuzzy, python-format msgid "Please insert %(productName)s disc %(discnum)d to continue." msgstr "Sett inn %s CD %d for å fortsette." #: yuminstall.py:409 msgid "Wrong Disc" msgstr "Feil disk" #: yuminstall.py:410 #, python-format msgid "That's not the correct %s disc." msgstr "Dette er ikke riktig disk for %s." #: yuminstall.py:417 msgid "Unable to access the disc." msgstr "Kan ikke aksessere disken." #: yuminstall.py:575 #, python-format msgid "Repository %r is missing name in configuration, using id" msgstr "" #: yuminstall.py:699 yuminstall.py:1165 iw/task_gui.py:309 msgid "" "Some of your software repositories require networking, but there was an " "error enabling the network on your system." msgstr "" #: yuminstall.py:800 yuminstall.py:802 msgid "Re_boot" msgstr "St_art på nytt" #: yuminstall.py:800 msgid "_Eject" msgstr "_Løs ut" #: yuminstall.py:806 #, python-format msgid "" "The file %s cannot be opened. This is due to a missing file, a corrupt " "package or corrupt media. Please verify your installation source.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "Filen %s kan ikke åpnes. Årsaken er at filen mangler, pakken er korrupt " "eller mediet er dårlig. Vennligst sjekk kilden for installasjonen.\n" "\n" "Hvis du avslutter, vil systemet ditt være i en inkonsistent tilstand som " "sannsynligvis vil kreve at det installeres på nytt.\n" "\n" #: yuminstall.py:854 msgid "Retrying" msgstr "Prøver på nytt" #: yuminstall.py:854 msgid "Retrying download." msgstr "Prøver nedlasting på nytt." #: yuminstall.py:919 #, python-format msgid "" "There was an error running your transaction for the following reason: %s\n" msgstr "" "Det oppsto en feil under kjøring av transaksjonen med følgende årsak: %s\n" #: yuminstall.py:962 yuminstall.py:963 msgid "file conflicts" msgstr "filen er i konflikt" #: yuminstall.py:964 msgid "older package(s)" msgstr "eldre pakker" #: yuminstall.py:965 msgid "insufficient disk space" msgstr "ikke nok diskplass" #: yuminstall.py:966 msgid "insufficient disk inodes" msgstr "ikke nok inoder på disken" #: yuminstall.py:967 msgid "package conflicts" msgstr " konflikt mellom pakker" #: yuminstall.py:968 msgid "package already installed" msgstr "pakken er allerede installert" #: yuminstall.py:969 msgid "required package" msgstr "nødvendig pakke" #: yuminstall.py:970 msgid "package for incorrect arch" msgstr "pakke for ugyldig arkitektur" #: yuminstall.py:971 msgid "package for incorrect os" msgstr "pakke for feil OS" #: yuminstall.py:985 msgid "You need more space on the following file systems:\n" msgstr "Du trenger mer plass på følgende filsystemer:\n" #: yuminstall.py:998 #, python-format msgid "" "There were file conflicts when checking the packages to be installed:\n" "%s\n" msgstr "" "Filkonflikter ble funnet under sjekk av pakkene som skal installeres:\n" "%s\n" #: yuminstall.py:1001 #, python-format msgid "" "There was an error running your transaction for the following reason(s): " "%s.\n" msgstr "" "Det oppsto en feil under kjøring av transaksjonen av følgende årsak(er): %s\n" #: yuminstall.py:1008 yuminstall.py:1013 msgid "Error Running Transaction" msgstr "Feil under kjøring av transaksjon" #: yuminstall.py:1191 msgid "" "Unable to read group information from repositories. This is a problem with " "the generation of your install tree." msgstr "" "Kan ikke lese gruppeinformasjonen fra lageret. Det er et problem med " "genereringen av ditt installasjonstre." #: yuminstall.py:1227 msgid "Retrieving installation information." msgstr "Henter informasjon om installasjonen." #: yuminstall.py:1229 #, python-format msgid "Retrieving installation information for %s." msgstr "Henter installasjonsinformasjon for %s." #: yuminstall.py:1231 msgid "Installation Progress" msgstr "Fremdrift for installasjonen" #: yuminstall.py:1239 textw/constants_text.py:64 msgid "Edit" msgstr "Rediger" #: yuminstall.py:1250 yuminstall.py:1441 #, python-format msgid "" "Unable to read package metadata. This may be due to a missing repodata " "directory. Please ensure that your install tree has been correctly " "generated.\n" "\n" "%s" msgstr "" "Kan ikke lese metadata for pakken. Dette kan være forårsaket av en menglende " "repodata-katalog. Vennligst sjekk at installasjonstreet er generert på en " "korrekt måte.\n" "\n" "%s" #: yuminstall.py:1419 msgid "" "Some of the packages you have selected for install are missing " "dependencies. You can exit the installation, go back and change your " "package selections, or continue installing these packages without their " "dependencies. If you continue, these packages may not work correctly due to " "missing components." msgstr "" #: yuminstall.py:1463 #, python-format msgid "" "Your selected packages require %d MB of free space for installation, but you " "do not have enough available. You can change your selections or exit the " "installer." msgstr "" "Dine valgte pakker krever %d MB med ledig plass for installasjon, men du har " "ikke nok ledig plass. Du kan endre dine valg eller avslutte " "installasjonsprogrammet." #: yuminstall.py:1484 msgid "Reboot?" msgstr "Start på nytt?" #: yuminstall.py:1485 msgid "The system will be rebooted now." msgstr "Systemet vil nå startes på nytt." #: yuminstall.py:1623 #, python-format msgid "" "You appear to be upgrading from a system which is too old to upgrade to this " "version of %s. Are you sure you wish to continue the upgrade process?" msgstr "" "Det ser ut som om systemet du oppgraderer fra er for gammelt til å " "oppgradere til denne versjonen av %s. Er du sikker på at du ønsker å " "fortsette oppgraderingen?" #: yuminstall.py:1658 #, fuzzy, python-format msgid "" "The arch of the release of %(productName)s you are upgrading to appears to " "be %(myarch)s which does not match your previously installed arch of " "%(arch)s. This is likely to not succeed. Are you sure you wish to continue " "the upgrade process?" msgstr "" "Arkitekturen for utgaven av %s du oppgraderer til ser ut til å være %s og " "denne er ikke lik din tidligere arkitektur %s. Det er meget sannsynlig at " "dette ikke vil fungere. Er du sikker på at du ønsker å fortsette " "oppgraderingen?" #: yuminstall.py:1705 msgid "Post Upgrade" msgstr "Etter oppgradering" #: yuminstall.py:1706 #, fuzzy msgid "Performing post-upgrade configuration" msgstr "Utfører konfigurasjon etter oppgradering..." #: yuminstall.py:1708 msgid "Post Installation" msgstr "Etter installasjon" #: yuminstall.py:1709 #, fuzzy msgid "Performing post-installation configuration" msgstr "Utfører konfigurasjon etter installering..." #: yuminstall.py:1932 msgid "Installation Starting" msgstr "Starter installasjon" #: yuminstall.py:1933 msgid "Starting installation process" msgstr "Starter installasjonsprosess" #: yuminstall.py:1971 msgid "Dependency Check" msgstr "Sjekk av avhengigheter" #: yuminstall.py:1972 #, fuzzy msgid "Checking dependencies in packages selected for installation" msgstr "Sjekker avhengigheter i pakker valgt for installasjon..." #: installclasses/corecd.py:38 msgid "Gentoo Core CD" msgstr "" #: installclasses/corecd.py:48 msgid "" "Select this installation type to just install a Core System without " "graphical applications. This is the best choice for Server-oriented " "deployments." msgstr "" #: installclasses/fluxbox.py:38 msgid "Gentoo Fluxbox" msgstr "" #: installclasses/fluxbox.py:47 msgid "" "Select this installation type for a default installation with the Fluxbox " "geeky minimal environment. After this installation process you will be able " "to install additional packages." msgstr "" #: installclasses/gnome.py:45 msgid "Gentoo GNOME Desktop" msgstr "" #: installclasses/gnome.py:47 msgid "" "Select this installation type for a default installation with the GNOME " "desktop environment. After this installation process you will be able to " "install additional packages." msgstr "" #: installclasses/kde.py:38 msgid "Gentoo KDE" msgstr "" #: installclasses/kde.py:47 msgid "" "Select this installation type for a default installation with the KDE " "desktop environment. After this installation process you will be able to " "install additional packages." msgstr "" #: iw/GroupSelector.py:147 #, python-format msgid "Packages in %s" msgstr "Pakker i %s" #: iw/GroupSelector.py:424 #, fuzzy, python-format msgid "Optional packages selected: %(inst)d of %(cnt)d" msgstr "Ingen valgfrie pakker valgt" #: iw/GroupSelector.py:426 #, python-format msgid "%s" msgstr "%s" #: iw/GroupSelector.py:486 msgid "Uncategorized" msgstr "Ikke kategorisert" #: iw/account_gui.py:52 msgid "Root _Password:" msgstr "_Passord for root:" #: iw/account_gui.py:54 msgid "_Confirm:" msgstr "_Bekreft:" #: iw/account_gui.py:92 msgid "Caps Lock is on." msgstr "Caps Lock er aktiv." #: iw/account_gui.py:102 iw/account_gui.py:110 iw/account_gui.py:117 #: iw/account_gui.py:137 textw/userauth_text.py:74 textw/userauth_text.py:166 msgid "Error with Password" msgstr "Feil med passord" #: iw/account_gui.py:103 msgid "" "You must enter your root password and confirm it by typing it a second time " "to continue." msgstr "" "Du må oppgi ditt root-passord og bekrefte det ved å skrive det inn en gang " "til for å fortsette." #: iw/account_gui.py:111 msgid "The passwords you entered were different. Please try again." msgstr "Passordene du skrev inn var forskjellige. Vennligst forsøk igjen." #: iw/account_gui.py:118 msgid "The root password must be at least six characters long." msgstr "Root-passordet må være minst seks tegn langt." #: iw/account_gui.py:127 textw/userauth_text.py:83 textw/userauth_text.py:190 msgid "Weak Password" msgstr "Svakt passord" #: iw/account_gui.py:128 #, python-format msgid "You have provided a weak password: %s" msgstr "Du har oppgitt et svakt passord: %s" #: iw/account_gui.py:130 msgid "Use Anyway" msgstr "Bruk likevel" #: iw/account_gui.py:138 textw/userauth_text.py:75 textw/userauth_text.py:167 msgid "" "Requested password contains non-ASCII characters, which are not allowed." msgstr "Oppgitt passord inneholder ugyldige tegn. Bruk kun ASCII-tegn." #: iw/advanced_storage.py:91 #, fuzzy msgid "You must select a NIC to use." msgstr "Du må velge en partisjon for redigering" #: iw/advanced_storage.py:138 msgid "Invalid Initiator Name" msgstr "Ugyldig navn på initiator" #: iw/advanced_storage.py:139 msgid "You must provide an initiator name." msgstr "Du må oppgi et navn på initiatoren." #: iw/advanced_storage.py:168 msgid "Error with Data" msgstr "Feil med data" #: iw/autopart_type.py:97 msgid "" "No partitions are available to resize. Only physical partitions with " "specific filesystems can be resized." msgstr "" #: iw/autopart_type.py:120 #, fuzzy msgid "Resize FileSystem Error" msgstr "Endrer størrelse for filsystem på %s..." #: iw/autopart_type.py:121 #, python-format msgid "%(device)s: %(msg)s" msgstr "" #: iw/autopart_type.py:130 msgid "Resize Device Error" msgstr "Feil ved endring av størrelse på enhet" #: iw/autopart_type.py:131 #, python-format msgid "%(name)s: %(msg)s" msgstr "" #: iw/autopart_type.py:228 #, fuzzy msgid "Use All Space" msgstr "Brukt plass:" #: iw/autopart_type.py:230 msgid "" "Removes all partitions on the selected device(s). This includes partitions " "created by other operating systems.\n" "\n" "Tip: This option will remove data from the selected device(s). Make " "sure you have backups." msgstr "" #: iw/autopart_type.py:236 #, fuzzy msgid "Replace Existing Linux System(s)" msgstr "Erstatt eksisterende Linux-system" #: iw/autopart_type.py:238 msgid "" "Removes all Linux partitions on the selected device(s). This does not remove " "other partitions you may have on your storage device(s) (such as VFAT or " "FAT32).\n" "\n" "Tip: This option will remove data from the selected device(s). Make " "sure you have backups." msgstr "" #: iw/autopart_type.py:246 #, fuzzy msgid "Shrink Current System" msgstr "Krymp eksisterende system" #: iw/autopart_type.py:248 msgid "" "Shrinks existing partitions to create free space for the default layout." msgstr "" #: iw/autopart_type.py:250 #, fuzzy msgid "Use Free Space" msgstr "Bruk ledig plass" #: iw/autopart_type.py:252 msgid "" "Retains your current data and partitions and uses only the unpartitioned " "space on the selected device(s), assuming you have enough free space " "available." msgstr "" #: iw/autopart_type.py:256 #, fuzzy msgid "Create Custom Layout" msgstr "Opprett egendefinert utforming" #: iw/autopart_type.py:258 msgid "" "Manually create your own custom layout on the selected device(s) using our " "partitioning tool." msgstr "" #: iw/blpasswidget.py:44 msgid "_Use a boot loader password" msgstr "Br_uk passord for oppstartslaster" #: iw/blpasswidget.py:45 msgid "" "A boot loader password prevents users from changing kernel options, " "increasing security." msgstr "" "Et passord for oppstartslasteren hindrer brukere i å gi tilfeldige flagg til " "kjernen, hvilket styrker sikkerheten." #: iw/blpasswidget.py:76 msgid "Change _password" msgstr "Endre _passord" #: iw/blpasswidget.py:99 msgid "Enter Boot Loader Password" msgstr "Oppgi passord for oppstartslaster" #: iw/blpasswidget.py:105 msgid "" "Enter a boot loader password and then confirm it. (Note that your BIOS " "keymap may be different than the actual keymap you are used to.)" msgstr "" "Oppgi et passord for oppstartslasteren og bekreft dette. (Merk at " "tastaturkartet kan være forskjellig i BIOS.)" #: iw/blpasswidget.py:112 msgid "_Password:" msgstr "_Passord:" #: iw/blpasswidget.py:118 msgid "Con_firm:" msgstr "Be_kreft:" #: iw/blpasswidget.py:139 msgid "Passwords don't match" msgstr "Passordene er ikke like" #: iw/blpasswidget.py:140 msgid "Passwords do not match" msgstr "Passordene er ikke like" #: iw/blpasswidget.py:149 msgid "" "Your boot loader password is shorter than six characters. We recommend a " "longer boot loader password.\n" "\n" "Would you like to continue with this password?" msgstr "" "Passordet for oppstartslasteren er mindre enn seks tegn. Vi anbefaler et " "lengre passord for oppstartslasteren.\n" "\n" "Vil du fortsette med dette passordet?" #: iw/bootloader_main_gui.py:36 msgid "Boot Loader Configuration" msgstr "Konfigurasjon av oppstartslaster" #: iw/bootloader_main_gui.py:180 iw/bootloader_main_gui.py:185 #: iw/bootloader_main_gui.py:223 #, python-format msgid "_Install boot loader on /dev/%s." msgstr "_Installer oppstartslaster på /dev/%s." #: iw/bootloader_main_gui.py:229 msgid "_Change device" msgstr "_Bytt enhet" #: iw/cleardisks_gui.py:33 msgid "Clear Disks Selector" msgstr "" #: iw/cleardisks_gui.py:44 iw/filter_gui.py:409 #, fuzzy msgid "You must select at least one drive to be used for installation." msgstr "Du må velge minst en harddisk du vil installere %s på." #: iw/cleardisks_gui.py:54 #, fuzzy msgid "You must select one drive to boot from." msgstr "Du må velge en partisjon for redigering" #: iw/cleardisks_gui.py:121 iw/cleardisks_gui.py:140 iw/filter_gui.py:444 #: iw/filter_gui.py:455 iw/filter_gui.py:485 msgid "Model" msgstr "" #: iw/cleardisks_gui.py:122 iw/cleardisks_gui.py:141 iw/filter_gui.py:445 #: iw/filter_gui.py:456 iw/filter_gui.py:464 iw/filter_gui.py:475 #: iw/filter_gui.py:486 msgid "Capacity" msgstr "" #: iw/cleardisks_gui.py:123 iw/filter_gui.py:446 iw/filter_gui.py:465 #: iw/filter_gui.py:476 iw/filter_gui.py:487 #, fuzzy msgid "Vendor" msgstr "_Fedora" #: iw/cleardisks_gui.py:124 iw/filter_gui.py:447 iw/filter_gui.py:466 #: iw/filter_gui.py:477 iw/filter_gui.py:488 msgid "Interconnect" msgstr "" #: iw/cleardisks_gui.py:125 iw/filter_gui.py:448 iw/filter_gui.py:478 #: iw/filter_gui.py:489 msgid "Serial Number" msgstr "" #: iw/cleardisks_gui.py:139 #, fuzzy msgid "Boot" msgstr "/boot" #: iw/cleardisks_gui.py:176 msgid "" "Tip: All Linux filesystems on the install target devices will be " "reformatted and wiped of any data. Make sure you have backups." msgstr "" #: iw/cleardisks_gui.py:178 msgid "" "Tip: The install target devices will be reformatted and wiped of any " "data. Make sure you have backups." msgstr "" #: iw/cleardisks_gui.py:180 msgid "" "Tip: Your filesystems on the install target devices will not be " "reformatted unless you choose to do so during customization." msgstr "" #: iw/congrats_gui.py:32 msgid "Congratulations" msgstr "Gratulerer" #: iw/congrats_gui.py:74 textw/complete_text.py:39 #, fuzzy, python-format msgid "" "Congratulations, your %s installation is complete.\n" "\n" msgstr "" "Gratulerer, din %s-installasjon er fullført.\n" "\n" "%s%s" #: iw/congrats_gui.py:77 textw/complete_text.py:42 msgid "Shutdown" msgstr "Slå av" #: iw/congrats_gui.py:79 textw/complete_text.py:44 #, fuzzy msgid "Please shutdown to use the installed system.\n" msgstr "" "Vennligst start systemet på nytt for å bruke det installerte systemet.\n" "\n" #: iw/congrats_gui.py:81 textw/complete_text.py:46 #, fuzzy msgid "Please reboot to use the installed system.\n" msgstr "" "Vennligst start systemet på nytt for å bruke det installerte systemet.\n" "\n" #: iw/congrats_gui.py:86 textw/complete_text.py:51 msgid "" "Note that updates may be available to ensure the proper functioning of your " "system and installation of these updates is recommended after the reboot." msgstr "" #: iw/congrats_gui.py:90 textw/complete_text.py:55 #, python-format msgid "" "Congratulations, your %s installation is complete.\n" "\n" "Please reboot to use the installed system. Note that updates may be " "available to ensure the proper functioning of your system and installation " "of these updates is recommended after the reboot." msgstr "" #: iw/examine_gui.py:39 msgid "Upgrade Examine" msgstr "Sjekk oppgradering" #: iw/examine_gui.py:60 #, fuzzy msgid "Fresh Installation" msgstr "Før installasjon" #: iw/examine_gui.py:62 #, fuzzy, python-format msgid "" "Choose this option to install a fresh copy of %s on your system. Existing " "software and data may be overwritten depending on your configuration choices." msgstr "" "Velg dette alternativet for å installere systemet på nytt. Eksisterende " "programvare og data kan bli overskrevet avhengig av dine valg for " "konfigurasjonen." #: iw/examine_gui.py:67 #, fuzzy msgid "Bootloader Recovery" msgstr "Enhet for oppstartslaster" #: iw/examine_gui.py:69 #, fuzzy, python-format msgid "" "Choose this option if you would like to recover your existing %s system " "bootloader. This option will preserve the existing data on your storage " "device(s)." msgstr "" "Velg dette alternativet hvis du ønsker å oppgradere ditt eksisterende %s-" "system. Dette alternativet vil bevare eksisterende data på diskene dine." #: iw/examine_gui.py:109 #, fuzzy msgid "" "At least one existing installation has been detected on your system. What " "would you like to do?" msgstr "" "Ingen enhetsdrivere er lastet for ditt system. Ønsker du å gjøre dette nå?" #: iw/examine_gui.py:128 #, fuzzy, python-format msgid "Which %s installation would you like to recover?" msgstr "Hva vil du gjøre?" #: iw/examine_gui.py:142 msgid "Unknown Linux system" msgstr "Ukjent Linux-system" #: iw/filter_gui.py:147 #, python-format msgid "%s device(s) (%s MB) selected out of %s device(s) (%s MB) total." msgstr "" #: iw/filter_gui.py:397 #, fuzzy msgid "Device Filter" msgstr "Oppsett av enhet feilet" #: iw/filter_gui.py:449 iw/filter_gui.py:457 iw/filter_gui.py:468 #: iw/filter_gui.py:479 iw/filter_gui.py:494 iw/osbootwidget.py:66 #: iw/partition_gui.py:607 msgid "Device" msgstr "Enhet" #: iw/filter_gui.py:463 iw/filter_gui.py:474 iw/filter_gui.py:490 #, fuzzy msgid "Identifier" msgstr "Identifiser" #: iw/filter_gui.py:467 #, fuzzy msgid "Paths" msgstr "St_i" #: iw/filter_gui.py:491 #, fuzzy msgid "Port" msgstr "_Avbryt" #: iw/filter_gui.py:492 #, fuzzy msgid "Target" msgstr "Test" #: iw/filter_gui.py:493 msgid "LUN" msgstr "" #: iw/filter_type.py:55 #, fuzzy msgid "What type of devices will your installation involve?" msgstr "Hvilken type media inneholder installasjonsbildet?" #: iw/filter_type.py:61 #, fuzzy msgid "Basic Storage Devices" msgstr "Finner lagringsenheter" #: iw/filter_type.py:62 msgid "" "Installs or upgrades to typical types of storage devices. If you're not " "sure which option is right for you, this is probably it." msgstr "" #: iw/filter_type.py:66 #, fuzzy msgid "Specialized Storage Devices" msgstr "Finner lagringsenheter" #: iw/filter_type.py:67 msgid "" "Installs or upgrades to devices such as Storage Area Networks (SANs) or " "mainframe attached disks (DASD), usually in an enterprise environment" msgstr "" #: iw/language_gui.py:33 textw/language_text.py:45 msgid "Language Selection" msgstr "Valg av språk" #: iw/language_gui.py:81 loader/lang.c:371 textw/language_text.py:46 msgid "What language would you like to use during the installation process?" msgstr "Hvilket språk ønsker du å bruke under installeringen?" #: iw/lvm_dialog_gui.py:125 iw/lvm_dialog_gui.py:171 iw/lvm_dialog_gui.py:185 #: iw/lvm_dialog_gui.py:224 iw/lvm_dialog_gui.py:301 iw/lvm_dialog_gui.py:690 #: iw/lvm_dialog_gui.py:711 msgid "Not enough space" msgstr "Ikke nok plass" #: iw/lvm_dialog_gui.py:126 msgid "" "The physical extent size cannot be changed because otherwise the space " "required by the currently defined logical volumes will be increased to more " "than the available space." msgstr "" "Fysisk størrelse kan ikke endres fordi plassen som kreves av nåværende " "definerte logiske volumer da vil bli mer større enn tilgjengelig plass." #: iw/lvm_dialog_gui.py:135 msgid "Confirm Physical Extent Change" msgstr "Bekreft endring i fysisk utbredelse" #: iw/lvm_dialog_gui.py:136 msgid "" "This change in the value of the physical extent will require the sizes of " "the current logical volume requests to be rounded up in size to an integer " "multiple of the physical extent.\n" "\n" "This change will take effect immediately." msgstr "" "Denne endringen i verdien for fysisk område vil kreve at størrelsen på det " "aktuelle logiske volumet rundes opp i størrelse til et heltall ganger fysisk " "område.\n" "\n" "Denne endringen vil aktiveres med en gang." #: iw/lvm_dialog_gui.py:145 iw/lvm_dialog_gui.py:207 msgid "C_ontinue" msgstr "F_ortsett" #: iw/lvm_dialog_gui.py:172 #, fuzzy, python-format msgid "" "The physical extent size cannot be changed because the value selected " "(%(curpe)10.2f MB) is larger than the smallest physical volume " "(%(maxpvsize)10.2f MB) in the volume group." msgstr "" "Fysisk område kan ikke endres fordi verdien som ble valgt (%10.2f MB) er " "større enn det minste fysiske volumet (%10.2f MB) i volumgruppen." #: iw/lvm_dialog_gui.py:186 #, fuzzy, python-format msgid "" "The physical extent size cannot be changed because the value selected " "(%(curpe)10.2f MB) is too large compared to the size of the smallest " "physical volume (%(maxpvsize)10.2f MB) in the volume group." msgstr "" "Fysisk områdes størrelse kan ikke endres fordi verdien som ble valgt (%10.2f " "MB) er for stor sammenlignet med størrelsen på det minste fysiske volumet " "(%10.2f MB) i volumgruppen." #: iw/lvm_dialog_gui.py:200 msgid "Too small" msgstr "For liten" #: iw/lvm_dialog_gui.py:201 msgid "" "This change in the value of the physical extent will waste substantial space " "on one or more of the physical volumes in the volume group." msgstr "" "Denne endringen i verdien for fysisk område vil kaste bort mye plass på et " "eller flere volum i volumgruppen." #: iw/lvm_dialog_gui.py:225 #, python-format msgid "" "The physical extent size cannot be changed because the resulting maximum " "logical volume size (%10.2f MB) is smaller than one or more of the currently " "defined logical volumes." msgstr "" "Størrelse på fysisk område kan ikke endres fordi resulterende maksimal " "logisk volumstørrelse (%10.2f MB) er mindre enn ett eller flere definerte " "logiske volum." #: iw/lvm_dialog_gui.py:302 msgid "" "You cannot remove this physical volume because otherwise the volume group " "will be too small to hold the currently defined logical volumes." msgstr "" "Du kan ikke fjerne dette fysiske volumet fordi volumgruppen da vil være for " "liten til å holde definerte logiske volum." #: iw/lvm_dialog_gui.py:401 msgid "Make Logical Volume" msgstr "Lag logisk volum" #: iw/lvm_dialog_gui.py:403 #, python-format msgid "Edit Logical Volume: %s" msgstr "Rediger logisk volum: %s" #: iw/lvm_dialog_gui.py:442 iw/raid_dialog_gui.py:443 msgid "_File System Type:" msgstr "_Filsystemtype:" #: iw/lvm_dialog_gui.py:448 msgid "_Logical Volume Name:" msgstr "Navn på _logisk volum:" #: iw/lvm_dialog_gui.py:457 iw/partition_dialog_gui.py:469 msgid "_Size (MB):" msgstr "_Størrelse (MB):" #: iw/lvm_dialog_gui.py:464 #, python-format msgid "(Max size is %s MB)" msgstr "(Maksimal størrelse er %s MB)" #: iw/lvm_dialog_gui.py:469 iw/partition_dialog_gui.py:521 #: iw/partition_ui_helpers_gui.py:331 iw/raid_dialog_gui.py:415 msgid "_Encrypt" msgstr "Krypt_er" #: iw/lvm_dialog_gui.py:478 iw/partition_dialog_gui.py:451 #: iw/raid_dialog_gui.py:453 msgid "Original File System Type:" msgstr "_Opprinnelig filsystemtype:" #: iw/lvm_dialog_gui.py:483 iw/partition_dialog_gui.py:459 #: iw/raid_dialog_gui.py:460 msgid "Original File System Label:" msgstr "Opprinnelig etikett for filsystem:" #: iw/lvm_dialog_gui.py:488 msgid "Logical Volume Name:" msgstr "Navn på logisk volum:" #: iw/lvm_dialog_gui.py:492 msgid "Size (MB):" msgstr "Størrelse (MB):" #: iw/lvm_dialog_gui.py:519 iw/partition_dialog_gui.py:407 #: iw/raid_dialog_gui.py:434 msgid "_Mount Point:" msgstr "_Monteringspunkt:" #: iw/lvm_dialog_gui.py:596 iw/partition_dialog_gui.py:113 #: iw/partition_ui_helpers_gui.py:109 iw/partition_ui_helpers_gui.py:131 #: iw/partition_ui_helpers_gui.py:133 iw/raid_dialog_gui.py:169 msgid "" msgstr "" #: iw/lvm_dialog_gui.py:604 msgid "Illegal Logical Volume Name" msgstr "Ugyldig navn på logisk volum" #: iw/lvm_dialog_gui.py:619 msgid "Illegal logical volume name" msgstr "Ugyldig navn på logisk volum" #: iw/lvm_dialog_gui.py:620 #, python-format msgid "The logical volume name \"%s\" is already in use. Please pick another." msgstr "Navn på logisk volum «%s» er allerede i bruk. Vennligst velg et annet." #: iw/lvm_dialog_gui.py:661 iw/partition_dialog_gui.py:127 #: iw/raid_dialog_gui.py:183 msgid "Mount point in use" msgstr "Monteringspunktet er i bruk" #: iw/lvm_dialog_gui.py:662 iw/partition_dialog_gui.py:128 #: iw/raid_dialog_gui.py:184 #, python-format msgid "The mount point \"%s\" is in use. Please pick another." msgstr "Monteringspunktet «%s» er allerede i bruk. Velg et annet." #: iw/lvm_dialog_gui.py:677 msgid "Illegal size" msgstr "Ugyldig størrelse" #: iw/lvm_dialog_gui.py:678 msgid "The requested size as entered is not a valid number greater than 0." msgstr "Forespurt størrelse som oppgitt er ikke et gyldig tall større enn 0." #: iw/lvm_dialog_gui.py:691 #, fuzzy, python-format msgid "" "The current requested size (%(size)10.2f MB) is larger than the maximum " "logical volume size (%(maxlv)10.2f MB). To increase this limit you can " "create more Physical Volumes from unpartitioned disk space and add them to " "this Volume Group." msgstr "" "Forespurt størrelse (%10.2f MB) er større enn maksimal størrelse på logiske " "volum (%10.2f MB). For å øke denne grensen kan du opprette flere fysiske " "volumer fra diskplass som ikke er partisjonert og legge dem til i denne " "volumgruppen." #: iw/lvm_dialog_gui.py:712 #, python-format msgid "" "The logical volumes you have configured require %(size)d MB, but the volume " "group only has %(tempvgsize)d MB. Please either make the volume group " "larger or make the logical volume(s) smaller." msgstr "" #: iw/lvm_dialog_gui.py:814 msgid "No free slots" msgstr "Ingen ledige plasser" #: iw/lvm_dialog_gui.py:815 #, python-format msgid "You cannot create more than %d logical volume per volume group." msgid_plural "You cannot create more than %d logical volumes per volume group." msgstr[0] "" msgstr[1] "" #: iw/lvm_dialog_gui.py:825 msgid "No free space" msgstr "Ingen ledig plass" #: iw/lvm_dialog_gui.py:826 msgid "" "There is no room left in the volume group to create new logical volumes. To " "add a logical volume you must reduce the size of one or more of the " "currently existing logical volumes" msgstr "" "Det er ikke ledig plass i volumgruppen til å opprette nye logiske volum. For " "å legge til et logisk volum, må du redusere størrelsen på ett eller flere av " "de eksisterende logiske volumene." #: iw/lvm_dialog_gui.py:863 #, python-format msgid "Are you sure you want to delete the logical volume \"%s\"?" msgstr "Er du sikker på at du vil slette logisk volum «%s»?" #: iw/lvm_dialog_gui.py:969 msgid "Invalid Volume Group Name" msgstr "Ugyldig gruppenavn for volum" #: iw/lvm_dialog_gui.py:978 msgid "Name in use" msgstr "Navn i bruk" #: iw/lvm_dialog_gui.py:979 #, python-format msgid "The volume group name \"%s\" is already in use. Please pick another." msgstr "Gruppenavn for volum «%s» er allerede i bruk. Vennligst velg et annet." #: iw/lvm_dialog_gui.py:1265 msgid "Not enough physical volumes" msgstr "Ikke nok fysiske volumer" #: iw/lvm_dialog_gui.py:1266 msgid "" "At least one unused physical volume partition is needed to create an LVM " "Volume Group.\n" "\n" "Create a partition or RAID array of type \"physical volume (LVM)\" and then " "select the \"LVM\" option again." msgstr "" "Minst en ubrukt partisjon for logiske volum kreves for å opprette en LVM-" "volumgruppe.\n" "\n" "Opprett en partisjon eller et RAID av type «fysisk volum (LVM)» og velg så " "alternativet «LVM» igjen." #: iw/lvm_dialog_gui.py:1277 msgid "Make LVM Volume Group" msgstr "Lag LVM-volumgruppe" #: iw/lvm_dialog_gui.py:1280 #, python-format msgid "Edit LVM Volume Group: %s" msgstr "Rediger LVM-volumgruppe: %s" #: iw/lvm_dialog_gui.py:1282 msgid "Edit LVM Volume Group" msgstr "Rediger LVM-volumgruppe" #: iw/lvm_dialog_gui.py:1298 msgid "_Volume Group Name:" msgstr "Gruppenavn for _volum:" #: iw/lvm_dialog_gui.py:1306 msgid "Volume Group Name:" msgstr "Gruppenavn for volum:" #: iw/lvm_dialog_gui.py:1314 msgid "_Physical Extent:" msgstr "_Fysisk utbredelse:" #: iw/lvm_dialog_gui.py:1329 msgid "Physical Volumes to _Use:" msgstr "Fysiske volumer som skal br_ukes:" #: iw/lvm_dialog_gui.py:1335 msgid "Used Space:" msgstr "Brukt plass:" #: iw/lvm_dialog_gui.py:1352 msgid "Free Space:" msgstr "Ledig plass:" #: iw/lvm_dialog_gui.py:1370 msgid "Total Space:" msgstr "Total størrelse:" #: iw/lvm_dialog_gui.py:1408 msgid "Logical Volume Name" msgstr "Navn på logisk volum" #: iw/lvm_dialog_gui.py:1411 iw/partition_gui.py:610 #: iw/upgrade_swap_gui.py:138 textw/upgrade_text.py:124 msgid "Mount Point" msgstr "Monteringspunkt" #: iw/lvm_dialog_gui.py:1414 iw/partition_gui.py:609 msgid "Size (MB)" msgstr "Størrelse (MB)" #: iw/lvm_dialog_gui.py:1428 iw/osbootwidget.py:96 msgid "_Add" msgstr "_Legg til" #: iw/lvm_dialog_gui.py:1431 iw/osbootwidget.py:100 iw/partition_gui.py:1815 #: iw/partition_gui.py:1825 msgid "_Edit" msgstr "R_ediger" #: iw/lvm_dialog_gui.py:1446 msgid "_Logical Volumes" msgstr "_Logiske volumer" #: iw/netconfig_dialog.py:192 textw/netconfig_text.py:36 #, fuzzy, python-format msgid "" "An error occurred converting the value entered for \"%(field)s\":\n" "%(errmsg)s" msgstr "" "En feil oppsto ved konvertering av verdien oppgitt for «%s»:\n" "%s" #: iw/netconfig_dialog.py:195 iw/netconfig_dialog.py:204 #: textw/netconfig_text.py:35 textw/netconfig_text.py:42 msgid "Error With Data" msgstr "Feil med data" #: iw/netconfig_dialog.py:203 #, python-format msgid "A value is required for the field %s." msgstr "En verdi er krevet for feltet «%s»." #: iw/netconfig_dialog.py:213 #, fuzzy, python-format msgid "An error occurred trying to bring up the %s network interface." msgstr "En feil oppstod under kopiering av skjermdump." #: iw/netconfig_dialog.py:215 #, fuzzy msgid "Error Configuring Network" msgstr "Feil under konfigurasjon av nettverksenhet" #: iw/netconfig_dialog.py:241 msgid "Dynamic IP Address" msgstr "Dynamisk IP-adresse" #: iw/netconfig_dialog.py:242 #, python-format msgid "Sending request for IP address information for %s" msgstr "Sender forespørsel om IP-adresseinformasjon for %s" #: iw/netconfig_dialog.py:257 iw/netconfig_dialog.py:260 #: textw/netconfig_text.py:225 textw/netconfig_text.py:228 msgid "IP Address" msgstr "IP-adresse" #: iw/netconfig_dialog.py:267 textw/netconfig_text.py:235 msgid "IPv4 CIDR prefix must be between 0 and 32." msgstr "CIDR-prefiks for IPv4 må være mellom 0 og 32." #: iw/netconfig_dialog.py:268 iw/netconfig_dialog.py:274 #: iw/netconfig_dialog.py:282 iw/netconfig_dialog.py:285 #: textw/netconfig_text.py:236 textw/netconfig_text.py:242 #: textw/netconfig_text.py:250 msgid "IPv4 Network Mask" msgstr "IPv4-nettmaske" #: iw/netconfig_dialog.py:295 textw/netconfig_text.py:263 msgid "Gateway" msgstr "Gateway" #: iw/netconfig_dialog.py:305 textw/netconfig_text.py:273 msgid "Nameserver" msgstr "Navnetjener" #: iw/netconfig_dialog.py:314 msgid "Error configuring network device:" msgstr "Feil under konfigurasjon av nettverksenhet:" #: iw/network_gui.py:73 iw/network_gui.py:79 msgid "Error with Hostname" msgstr "Feil med vertsnavn" #: iw/network_gui.py:74 msgid "You must enter a valid hostname for this computer." msgstr "Du må oppgi et gyldig vertsnavn for denne datamaskinen." #: iw/network_gui.py:80 #, fuzzy, python-format msgid "" "The hostname \"%(hostname)s\" is not valid for the following reason:\n" "\n" "%(herrors)s" msgstr "" "Vertsnavnet «%s» er ikke gyldig av følgende årsak:\n" "\n" "%s" #: iw/osbootwidget.py:50 msgid "Boot loader operating system list" msgstr "Liste med operativsystemer for oppstartslaster" #: iw/osbootwidget.py:66 msgid "Default" msgstr "Forvalg" #: iw/osbootwidget.py:66 iw/partition_gui.py:608 msgid "Label" msgstr "Etikett" #: iw/osbootwidget.py:130 msgid "Image" msgstr "Bilde" #: iw/osbootwidget.py:137 msgid "" "Enter a label for the boot loader menu to display. The device (or hard drive " "and partition number) is the device from which it boots." msgstr "" "Oppgi en etikett som skal vises i menyen for oppstartslasteren. Enheten " "(eller harddisken og partisjonsnummeret) er oppstartsenheten." #: iw/osbootwidget.py:145 msgid "_Label" msgstr "_Etikett" #: iw/osbootwidget.py:153 msgid "_Device" msgstr "_Enhet" #: iw/osbootwidget.py:183 msgid "Default Boot _Target" msgstr "Forvalgt opps_tartsmål" #: iw/osbootwidget.py:212 msgid "You must specify a label for the entry" msgstr "Du må spesifisere en etikett for oppføringen" #: iw/osbootwidget.py:221 msgid "Boot label contains illegal characters" msgstr "Oppstartsetiketten inneholder ugyldige tegn" #: iw/osbootwidget.py:245 msgid "Duplicate Label" msgstr "Duplisert etikett" #: iw/osbootwidget.py:246 msgid "This label is already in use for another boot entry." msgstr "Denne etiketten er allerede i bruk for en annen oppstartsoppføring." #: iw/osbootwidget.py:259 msgid "Duplicate Device" msgstr "Duplisert enhet" #: iw/osbootwidget.py:260 msgid "This device is already being used for another boot entry." msgstr "Denne enheten er allerede i bruk for en annen oppstartsoppføring." #: iw/osbootwidget.py:322 msgid "Cannot Delete" msgstr "Kan ikke slette" #: iw/osbootwidget.py:323 #, python-format msgid "" "This boot target cannot be deleted because it is for the %s system you are " "about to install." msgstr "" "Dette oppstartsmålet kan ikke slettes fordi det er for %s-systemet du er i " "ferd med å installere." #: iw/partition_dialog_gui.py:57 msgid "Additional Size Options" msgstr "Flere alternativer for størrelse" #: iw/partition_dialog_gui.py:62 msgid "_Fixed size" msgstr "_Fast størrelse" #: iw/partition_dialog_gui.py:64 msgid "Fill all space _up to (MB):" msgstr "Fyll all plass _opp til (MB):" #: iw/partition_dialog_gui.py:71 msgid "Fill to maximum _allowable size" msgstr "Fyll opp til m_aksimal tillatt størrelse" #: iw/partition_dialog_gui.py:377 msgid "Add Partition" msgstr "Legg til partisjon" #: iw/partition_dialog_gui.py:379 #, fuzzy, python-format msgid "Edit Partition: %s" msgstr "Rediger partisjon: /dev/%s" #: iw/partition_dialog_gui.py:416 msgid "File System _Type:" msgstr "Filsystem_type:" #: iw/partition_dialog_gui.py:432 msgid "Allowable _Drives:" msgstr "Tillatte _stasjoner:" #: iw/partition_dialog_gui.py:508 msgid "Force to be a _primary partition" msgstr "Gjør til en _primærpartisjon" #: iw/partition_gui.py:356 #, fuzzy, python-format msgid "Drive %(drive)s (%(size)-0.f MB) (Model: %(model)s)" msgstr "Stasjon %s (%-0.f MB) (Modell: %s)" #: iw/partition_gui.py:396 iw/partition_gui.py:442 iw/partition_gui.py:509 #: iw/partition_gui.py:999 iw/partition_gui.py:1066 msgid "Free" msgstr "Ledig" #: iw/partition_gui.py:474 #, fuzzy, python-format msgid "LVM Volume Group %s (%-0.f MB)" msgstr "LVM-volumgrupper" #: iw/partition_gui.py:540 #, python-format msgid "MD RAID ARRAY %s (%-0.f MB)" msgstr "" #: iw/partition_gui.py:611 msgid "Type" msgstr "Type" #: iw/partition_gui.py:612 storage/__init__.py:1784 msgid "Format" msgstr "Formater" #: iw/partition_gui.py:649 msgid "" "Mount Point/\n" "RAID/Volume" msgstr "" "Monteringspunkt/\n" "RAID/Volum" #: iw/partition_gui.py:651 msgid "" "Size\n" "(MB)" msgstr "" "Størrelse\n" "(MB)" #: iw/partition_gui.py:756 msgid "Partitioning" msgstr "Partisjonering" #: iw/partition_gui.py:849 msgid "" "The partitioning scheme you requested caused the following critical errors." msgstr "Partisjoneringsskjemaet du krevde, forårsaket følgende kritiske feil." #: iw/partition_gui.py:851 #, python-format msgid "" "You must correct these errors before you continue your installation of %s." msgstr "" "Disse feilene må rettes opp før du fortsetter med installasjonen av %s." #: iw/partition_gui.py:857 msgid "Partitioning Errors" msgstr "Feil under partisjonering" #: iw/partition_gui.py:864 msgid "The partitioning scheme you requested generated the following warnings." msgstr "Partisjoneringsskjemaet du krevde, genererte følgende advarseler." #: iw/partition_gui.py:866 msgid "Would you like to continue with your requested partitioning scheme?" msgstr "Vil du fortsette med ditt forespurte partisjonsopplegg?" #: iw/partition_gui.py:871 msgid "Partitioning Warnings" msgstr "Advarsler fra partisjonering" #: iw/partition_gui.py:880 #, fuzzy msgid "" "The following pre-existing devices have been selected to be formatted, " "destroying all data." msgstr "" "Disse eksisterende partisjonene er merket for formatering, som vil ødelegge " "alle data." #: iw/partition_gui.py:892 msgid "Format Warnings" msgstr "Formateringsadvarsler" #: iw/partition_gui.py:897 storage/dasd.py:139 msgid "_Format" msgstr "_Formater" #: iw/partition_gui.py:987 msgid "LVM Volume Groups" msgstr "LVM-volumgrupper" #: iw/partition_gui.py:1009 msgid "RAID Devices" msgstr "_RAID-enheter" #: iw/partition_gui.py:1020 loader/hdinstall.c:206 msgid "Hard Drives" msgstr "Harddisker" #: iw/partition_gui.py:1070 msgid "Extended" msgstr "Utvidet" #: iw/partition_gui.py:1349 msgid "Cannot perform any creation action" msgstr "" #: iw/partition_gui.py:1350 msgid "" "Note that the creation action requires one of the following:\n" "\n" "* Free space in one of the Hard Drives.\n" "* At least two free Software RAID partitions.\n" "* At least one free physical volume (LVM) partition.\n" "* At least one Volume Group with free space." msgstr "" #: iw/partition_gui.py:1460 #, fuzzy, python-format msgid "" "Software RAID allows you to combine several disks into a larger RAID " "device. A RAID device can be configured to provide additional speed and " "reliability compared to using an individual drive. For more information on " "using RAID devices please consult the %s documentation.\n" msgstr "" "Programvare-RAID lar deg kombinere flere disker til en større RAID-enhet. En " "RAID-enhet kan konfigureres til å gi større hastighet og pålitelighet " "sammenlignet med en individuell stasjon. For mer informasjon om bruk av RAID-" "enheter se dokumentasjonen for %s.\n" "\n" "Du har nå %s programvare-RAID-partisjon(er) som er ledig for bruk.\n" "\n" #: iw/partition_gui.py:1466 msgid "" "To use RAID you must first create at least two partitions of type 'software " "RAID'. Then you can create a RAID device that can be formatted and " "mounted.\n" "\n" msgstr "" "For å bruke RAID må du først opprette minst to partisjoner av type " "«programvare-RAID». Etter dette kan du opprette en RAID-enhet som kan " "formateres og monteres.\n" "\n" #: iw/partition_gui.py:1470 #, fuzzy, python-format msgid "You currently have %d software RAID partition free to use." msgid_plural "You currently have %d software RAID partitions free to use." msgstr[0] "Lag en partisjoner med programvare-RAID." msgstr[1] "Lag en partisjoner med programvare-RAID." #: iw/partition_gui.py:1474 #, fuzzy msgid "About RAID" msgstr "programvare RAID" #: iw/partition_gui.py:1480 #, python-format msgid "" "Logical Volume Manager (LVM) is a 3 level construct. The first level is made " "up of disks or partitions formatted with LVM metadata called Physical " "Volumes (PV). A Volume Group (VG) sits on top of one or more PVs. The VG, " "in turn, is the base to create one or more Logical Volumes (LV). Note that " "a VG can be an aggregate of PVs from multiple physical disks. For more " "information on using LVM please consult the %s documentation\n" msgstr "" #: iw/partition_gui.py:1488 msgid "" "To create a PV you need a partition with free space. To create a VG you " "need a PV that is not part of any existing VG. To create an LV you need a " "VG with free space.\n" "\n" msgstr "" #: iw/partition_gui.py:1492 #, python-format msgid "You currently have %d available PV free to use.\n" msgid_plural "You currently have %d available PVs free to use.\n" msgstr[0] "" msgstr[1] "" #: iw/partition_gui.py:1496 msgid "You currently have free space to create PVs." msgstr "" #: iw/partition_gui.py:1499 msgid "About LVM" msgstr "" #: iw/partition_gui.py:1530 msgid "Couldn't Create Drive Clone Editor" msgstr "Kunne iike opprette editor for diskkloning" #: iw/partition_gui.py:1531 msgid "The drive clone editor could not be created for some reason." msgstr "Editor for diskkloning kunne ikke opprettes av en ukjent grunn." #: iw/partition_gui.py:1589 storage/partitioning.py:196 #: storage/partitioning.py:239 msgid "Error Partitioning" msgstr "Feil under partisjonering" #: iw/partition_gui.py:1590 #, python-format msgid "Could not allocate requested partitions: %s." msgstr "Kunne ikke allokere forespurte partisjoner: %s." #: iw/partition_gui.py:1599 #, python-format msgid "Warning: %s." msgstr "Advarsel: %s." #: iw/partition_gui.py:1630 msgid "Unable To Edit" msgstr "Kan ikke redigere" #: iw/partition_gui.py:1631 #, fuzzy, python-format msgid "" "You cannot edit this device:\n" "\n" "%s" msgstr "" "Du kan ikke redigere denne partisjonen:\n" "\n" #: iw/partition_gui.py:1814 msgid "_Create" msgstr "" #: iw/partition_gui.py:1817 msgid "Re_set" msgstr "_Nullstill" #: iw/partition_gui.py:1840 #, fuzzy msgid "Please Select A Device" msgstr "Vennligst velg en kildestasjon." #: iw/partition_ui_helpers_gui.py:312 msgid "_Format as:" msgstr "_Formater som:" #: iw/partition_ui_helpers_gui.py:334 msgid "Mi_grate filesystem to:" msgstr "Mi_grer filsystem til:" #: iw/partition_ui_helpers_gui.py:364 msgid "_Resize" msgstr "End_re størrelse" #: iw/partition_ui_helpers_gui.py:435 #, python-format msgid "" "Partitions of type '%s' must be constrained to a single drive. To do this, " "select the drive in the 'Allowable Drives' checklist." msgstr "" "Partisjoner av type «%s» må begrenses til en enkelt stasjon. Dette gjøres " "ved å velge stasjonen i avkryssingslisten «Tillatte stasjoner»." #: iw/raid_dialog_gui.py:382 msgid "" "At least two unused software RAID partitions are needed to create a RAID " "device.\n" "\n" "First create at least two partitions of type \"software RAID\", and then " "select the \"RAID\" option again." msgstr "" "Minst to ubrukte programvare-RAID-partisjoner kreves for å opprette en RAID-" "enhet.\n" "\n" "Opprett først minst to partisjoner av type «programvare-RAID» og velg så " "alternativet «RAID» igjen." #: iw/raid_dialog_gui.py:396 msgid "Make RAID Device" msgstr "Lag RAID-enhet" #: iw/raid_dialog_gui.py:399 #, fuzzy, python-format msgid "Edit RAID Device: %s" msgstr "Rediger RAID-enhet" #: iw/raid_dialog_gui.py:401 msgid "Edit RAID Device" msgstr "Rediger RAID-enhet" #: iw/raid_dialog_gui.py:468 msgid "RAID _Device:" msgstr "RAI_D-enhet:" #: iw/raid_dialog_gui.py:486 msgid "RAID _Level:" msgstr "RAID-_nivå:" #: iw/raid_dialog_gui.py:528 msgid "_RAID Members:" msgstr "_RAID-medlemmer:" #: iw/raid_dialog_gui.py:545 msgid "Number of _spares:" msgstr "Antall re_servedisker:" #: iw/raid_dialog_gui.py:555 msgid "_Format partition?" msgstr "_Formater partisjon?" #: iw/raid_dialog_gui.py:629 msgid "" "The source drive has no partitions to be cloned. You must first define " "partitions of type 'software RAID' on this drive before it can be cloned." msgstr "" "Kildestasjonen har ingen partisjoner som skal klones. Du må definere " "partisjoner av type «programvare-RAID» på denne stasjonen før den kan klones." #: iw/raid_dialog_gui.py:633 iw/raid_dialog_gui.py:639 #: iw/raid_dialog_gui.py:653 iw/raid_dialog_gui.py:666 msgid "Source Drive Error" msgstr "Feil med kildestasjon" #: iw/raid_dialog_gui.py:640 msgid "" "The source drive you selected has partitions which are not of type 'software " "RAID'.\n" "\n" "You must remove these partitions before this drive can be cloned. " msgstr "" "Kildestasjonen som er valgt har partisjoner som ikke er av type «programvare-" "RAID».\n" "\n" "Disse partisjonene vil måtte fjernes før denne stasjonen kan klones. " #: iw/raid_dialog_gui.py:654 #, fuzzy, python-format msgid "" "The source drive you selected has partitions which are not constrained to " "the drive %s.\n" "\n" "You must remove these partitions or restrict them to this drive before this " "drive can be cloned. " msgstr "" "Kildestasjonen som er valgt har partisjoner som ikke er begrenset til " "stasjonen /dev/%s.\n" "\n" "Disse partisjonene vil måtte fjernes eller begrenses til denne stasjonen før " "den kan klones. " #: iw/raid_dialog_gui.py:667 msgid "" "The source drive you selected has software RAID partition(s) which are " "members of an active software RAID device.\n" "\n" "You must remove these partitions before this drive can be cloned." msgstr "" "Kildestasjonen som er valgt har programvare-RAID-partisjon(er) som er " "medlemmer av en aktiv programvare-RAID-enhet.\n" "\n" "Disse partisjonene vil måtte fjernes før stasjonen kan klones." #: iw/raid_dialog_gui.py:681 iw/raid_dialog_gui.py:687 #: iw/raid_dialog_gui.py:703 msgid "Target Drive Error" msgstr "Feil på målstasjon" #: iw/raid_dialog_gui.py:682 msgid "Please select the target drives for the clone operation." msgstr "Vennligst velg målstasjon for kloningen." #: iw/raid_dialog_gui.py:688 #, fuzzy, python-format msgid "The source drive %s cannot be selected as a target drive as well." msgstr "Kildestasjon /dev/%s kan ikke velges som målstasjon også." #: iw/raid_dialog_gui.py:704 #, fuzzy, python-format msgid "" "The target drive %(path)s has a partition which cannot be removed for the " "following reason:\n" "\n" "\"%(rc)s\"\n" "\n" "You must remove this partition before this drive can be a target." msgstr "" "Målstasjonen /dev/%s har en partisjon som ikke kan fjernes av følgende " "årsak:\n" "\n" "«%s»\n" "\n" "Denne partisjonen må fjernes før stasjonen kan være et mål." #: iw/raid_dialog_gui.py:767 msgid "Please select a source drive." msgstr "Vennligst velg en kildestasjon." #: iw/raid_dialog_gui.py:787 #, fuzzy, python-format msgid "" "The drive %s will now be cloned to the following drives:\n" "\n" msgstr "" "Stasjonen /dev/%s vil nå bli klonet til følgende stasjoner:\n" "\n" #: iw/raid_dialog_gui.py:792 msgid "" "\n" "\n" "WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED." msgstr "" "\n" "\n" "ADVARSEL! ALLE DATA PÅ MÅLSTASJONENE VIL BLI ØDELAGT." #: iw/raid_dialog_gui.py:795 msgid "Final Warning" msgstr "Endelig advarsel" #: iw/raid_dialog_gui.py:797 msgid "Clone Drives" msgstr "Kloning av disker" #: iw/raid_dialog_gui.py:806 msgid "There was an error clearing the target drives. Cloning failed." msgstr "Det oppsto en feil under tømming av målstasjonene. Kloning feilet." #: iw/raid_dialog_gui.py:829 #, fuzzy msgid "Clone Drive Tool" msgstr "Kloning av disker" #: iw/raid_dialog_gui.py:838 msgid "" "This tool clones the layout from a partitioned source onto other similar " "sized drives. The source must have partitions which are restricted to that " "drive and must ONLY contain unused software RAID partitions. EVERYTHING on " "the target drive(s) will be destroyed.\n" msgstr "" #: iw/raid_dialog_gui.py:849 msgid "Source Drive:" msgstr "Kildestasjon:" #: iw/raid_dialog_gui.py:857 msgid "Target Drive(s):" msgstr "Målstasjon(er):" #: iw/raid_dialog_gui.py:865 msgid "Drives" msgstr "Stasjoner" #: iw/task_gui.py:55 #, python-format msgid "" "Unable to read package metadata from repository. This may be due to a " "missing repodata directory. Please ensure that your repository has been " "correctly generated.\n" "\n" "%s" msgstr "" "Kan ikke lese metadata for pakken. Dette kan være forårsaket av en manglende " "repodata-katalog. Vennligst sjekk at installasjonstreet er generert på en " "korrekt måte.\n" "\n" "%s" #: iw/task_gui.py:132 msgid "Edit Repository" msgstr "Rediger lager" #: iw/task_gui.py:156 #, python-format msgid "" "The repository %s has already been added. Please choose a different " "repository name and URL." msgstr "" "Datalageret %s er allerede lagt til. Vennligst angi et annet navn og URL på " "datalageret." #: iw/task_gui.py:236 msgid "Invalid Proxy URL" msgstr "Ugyldig proxy-URL" #: iw/task_gui.py:237 msgid "You must provide an HTTP, HTTPS, or FTP URL to a proxy." msgstr "Du må oppgi en HTTP, HTTPS eller FTP URL til en proxy." #: iw/task_gui.py:249 iw/task_gui.py:430 msgid "Invalid Repository URL" msgstr "Ugyldig URL til lager" #: iw/task_gui.py:250 iw/task_gui.py:431 msgid "You must provide an HTTP, HTTPS, or FTP URL to a repository." msgstr "Du må oppgi en HTTP, HTTPS eller FTP URL til et lager." #: iw/task_gui.py:271 iw/task_gui.py:440 msgid "No Media Found" msgstr "Ingen medie funnet" #: iw/task_gui.py:272 iw/task_gui.py:441 msgid "" "No installation media was found. Please insert a disc into your drive and " "try again." msgstr "" #: iw/task_gui.py:303 iw/task_gui.py:464 msgid "Please enter an NFS server and path." msgstr "Vennligst oppgi navn og sti til NFS-tjener." #: iw/task_gui.py:322 #, fuzzy, python-format msgid "" "The following error occurred while setting up the repository:\n" "\n" "%s" msgstr "" "Følgende feil ble funnet under lesing av din kickstart-konfigurasjon:\n" "\n" "%s" #: iw/task_gui.py:345 msgid "Invalid Repository Name" msgstr "Ugyldig navn på lager" #: iw/task_gui.py:346 msgid "You must provide a repository name." msgstr "Du må oppgi et navn på lageret." #: iw/task_gui.py:496 ui/addrepo.glade.h:3 msgid "Add Repository" msgstr "Legg til lager" #: iw/task_gui.py:501 msgid "No Software Repos Enabled" msgstr "Ingen programvarelager aktivert" #: iw/task_gui.py:502 #, fuzzy msgid "" "You must have at least one software repository enabled to continue " "installation." msgstr "" "Disse feilene må rettes opp før du fortsetter med installasjonen av %s." #: iw/timezone_gui.py:63 textw/timezone_text.py:95 msgid "Time Zone Selection" msgstr "Valg av tidssone" #: iw/upgrade_bootloader_gui.py:37 textw/upgrade_bootloader_text.py:137 msgid "Upgrade Boot Loader Configuration" msgstr "Konfigurasjon av oppstartslaster under oppgradering" #: iw/upgrade_bootloader_gui.py:123 msgid "_Update boot loader configuration" msgstr "_Oppdater konfigurasjon av oppstartslaster" #: iw/upgrade_bootloader_gui.py:124 msgid "This will update your current boot loader." msgstr "Dette vil oppdatere din nåværende oppstartslaster." #: iw/upgrade_bootloader_gui.py:128 textw/upgrade_bootloader_text.py:108 msgid "" "Due to system changes, your boot loader configuration can not be " "automatically updated." msgstr "" "På grunn av systemendringer, kan ikke konfigurasjonen til oppstartslasteren " "bli automatisk oppdatert." #: iw/upgrade_bootloader_gui.py:131 textw/upgrade_bootloader_text.py:112 msgid "" "The installer is unable to detect the boot loader currently in use on your " "system." msgstr "" "Installeringsprogrammet klarte ikke å finne en oppstartslaster på ditt " "nåværende system." #: iw/upgrade_bootloader_gui.py:138 textw/upgrade_bootloader_text.py:121 #, fuzzy, python-format msgid "" "The installer has detected the %(type)s boot loader currently installed on " "%(bootDev)s." msgstr "" "Installeringsprogrammet har funnet ut at oppstartslasteren %s er installert " "på %s." #: iw/upgrade_bootloader_gui.py:142 msgid "This is the recommended option." msgstr "Dette er det anbefalte alternativet." #: iw/upgrade_bootloader_gui.py:147 msgid "_Create new boot loader configuration" msgstr "_Lag ny konfigurasjon for oppstartslaster" #: iw/upgrade_bootloader_gui.py:149 msgid "" "This option creates a new boot loader configuration. If you wish to switch " "boot loaders, you should choose this." msgstr "" "Dette valget vil la deg lage en ny konfigurasjon for din oppstartslaster. " "Hvis du ønsker å bytte oppstartslaster, bør du velge dette." #: iw/upgrade_bootloader_gui.py:156 msgid "_Skip boot loader updating" msgstr "_Hopp over oppdatering av oppstartslaster" #: iw/upgrade_bootloader_gui.py:157 msgid "" "This option makes no changes to boot loader configuration. If you are using " "a third party boot loader, you should choose this." msgstr "" "Dette valget vil ikke endre konfigurasjonen av din oppstartslaster. Du bør " "velge dette dersom du bruker en tredjeparts oppstartslaster." #: iw/upgrade_bootloader_gui.py:168 msgid "What would you like to do?" msgstr "Hva vil du gjøre?" #: iw/upgrade_migratefs_gui.py:38 textw/upgrade_text.py:42 msgid "Migrate File Systems" msgstr "Migrer filsystemer" #: iw/upgrade_migratefs_gui.py:69 textw/upgrade_text.py:44 #, fuzzy, python-format msgid "" "This release of %(productName)s supports an updated file system, which has " "several benefits over the file system traditionally shipped in " "%(productName)s. This installation program can migrate formatted partitions " "without data loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" "Denne utgaven av %s støtter et oppdatert filsystem som har flere fordeler " "over filsystemet som tradisjonelt har vært brukt i %s. Det er mulig å " "migrere partisjoner uten tap av data.\n" "\n" "Hvilke av disse partisjonene vil du migrere?" #: iw/upgrade_swap_gui.py:35 msgid "Upgrade Swap Partition" msgstr "Swap for oppgradering" #: iw/upgrade_swap_gui.py:92 textw/upgrade_text.py:107 #, python-format msgid "" "Recent kernels (2.4 or newer) need significantly more swap than older " "kernels, up to twice the amount of RAM on the system. You currently have " "%dMB of swap configured, but you may create additional swap space on one of " "your file systems now." msgstr "" "Nyere kjerner (2.4 eller nyere) trenger vesentlig mer swap enn eldre " "kjerner, opptil det dobbelte av systemets RAM. Du har nå %d MB av swap " "konfigurert,men du kan opprette ekstra swap på et av dine filsystemer nå." #: iw/upgrade_swap_gui.py:99 #, python-format msgid "" "\n" "\n" "The installer has detected %s MB of RAM.\n" msgstr "" "\n" "\n" "Installasjonsprogrammet har funnet %s MB RAM.\n" #: iw/upgrade_swap_gui.py:111 msgid "I _want to create a swap file" msgstr "Jeg _ønsker å lage en swapfil." #: iw/upgrade_swap_gui.py:120 msgid "Select the _partition to put the swap file on:" msgstr "Velg _partisjonen swapfilen skal legges på:" #: iw/upgrade_swap_gui.py:138 textw/upgrade_text.py:125 msgid "Partition" msgstr "Partisjon" #: iw/upgrade_swap_gui.py:138 msgid "Free Space (MB)" msgstr "Ledig diskplass (MB)" #: iw/upgrade_swap_gui.py:156 #, python-format msgid "" "A minimum swap file size of %d MB is recommended. Please enter a size for " "the swap file:" msgstr "" "Det anbefales at swapfilen er minst %d MB. Vennligst oppgi en størrelse for " "swapfilen:" #: iw/upgrade_swap_gui.py:171 msgid "Swap file _size (MB):" msgstr "_Størrelse på swapfil (MB):" #: iw/upgrade_swap_gui.py:181 msgid "I _don't want to create a swap file" msgstr "Jeg ønsker _ikke å lage en swapfil" #: iw/upgrade_swap_gui.py:191 msgid "" "A swap file is strongly recommended. Failure to create one could cause the " "installer to abort abnormally. Are you sure you wish to continue?" msgstr "" "Det anbefales på det sterkeste at du lager en swapfil. Hvis dette ikke " "gjøres, kan installeringsprogrammet få problemer og avbryte. Er du sikker på " "at du vil fortsette?" #: iw/upgrade_swap_gui.py:199 textw/upgrade_text.py:194 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "Størrelsen på swapfilen må være mellom 1 og 2000 MB." #: iw/upgrade_swap_gui.py:206 textw/upgrade_text.py:189 msgid "" "There is not enough space on the device you selected for the swap partition." msgstr "Det er ikke nok plass for swapområdet på den enheten som du oppga." #: iw/welcome_gui.py:56 textw/welcome_text.py:36 msgid "Network Install Required" msgstr "Nettverksinstallasjon kreves" #: iw/welcome_gui.py:57 textw/welcome_text.py:37 msgid "" "Your installation source is set to a network location, but no netork devices " "were found on your system. To avoid a network installation, boot with the " "full DVD, full CD set, or do not pass a repo= parameter that specifies a " "network source." msgstr "" #: iw/welcome_gui.py:67 msgid "E_xit Installer" msgstr "A_vslutt installering" #: iw/zipl_gui.py:37 msgid "z/IPL Boot Loader Configuration" msgstr "Konfigurasjon av z/IPL-oppstartslaster" #: iw/zipl_gui.py:61 msgid "The z/IPL boot loader will be installed on your system." msgstr "Oppstartslasteren z/IPL vil bli installert på ditt system." #: iw/zipl_gui.py:63 msgid "" "The z/IPL Boot Loader will now be installed on your system.\n" "\n" "The root partition will be the one you selected previously in the partition " "setup.\n" "\n" "The kernel used to start the machine will be the one to be installed by " "default.\n" "\n" "If you wish to make changes later after the installation feel free to change " "the /etc/zipl.conf configuration file.\n" "\n" "You can now enter any additional kernel parameters which your machine or " "your setup may require." msgstr "" "z/IPL-oppstartslasteren vil nå installeres på ditt system.\n" "\n" "Rotpartisjonen vil være den du valgte tidligere i oppsett av partisjoner.\n" "\n" "Kjernen som brukes til å starte maskinen vil være den som ble installert som " "forvalg.\n" "\n" "Hvis du ønsker å gjøre endringer senere kan du gjøre disse i " "konfigurasjonfilen /etc/zipl.conf.\n" "\n" "Du kan nå oppgi tilleggsparametere for kjernen som din maskin eventuelt " "trenger." #: iw/zipl_gui.py:90 textw/zipl_text.py:72 msgid "Kernel Parameters" msgstr "Kjerneparametere" #: iw/zipl_gui.py:93 iw/zipl_gui.py:96 msgid "Chandev Parameters" msgstr "Chandev-parametere" #: loader/cdinstall.c:185 loader/cdinstall.c:206 loader/mediacheck.c:61 msgid "Media Check" msgstr "Mediasjekk" #: loader/cdinstall.c:185 loader/cdinstall.c:188 loader/cdinstall.c:206 #: loader/cdinstall.c:214 loader/method.c:324 msgid "Test" msgstr "Test" #: loader/cdinstall.c:185 loader/cdinstall.c:189 msgid "Eject Disc" msgstr "Løs ut disk" #: loader/cdinstall.c:186 #, c-format msgid "" "Choose \"%s\" to test the disc currently in the drive, or \"%s\" to eject " "the disc and insert another for testing." msgstr "" "Velg \"%s\" for å teste disken som er i stasjonen, eller «%s» for å løse ut " "disken og sette inn en ny for testing." #: loader/cdinstall.c:207 #, c-format msgid "" "If you would like to test additional media, insert the next disc and press " "\"%s\". Testing each disc is not strictly required, however it is highly " "recommended. Minimally, the discs should be tested prior to using them for " "the first time. After they have been successfully tested, it is not required " "to retest each disc prior to using it again." msgstr "" "Hvis du ønsker å teste flere plater kan du sette inn neste CD og trykke på " "«%s». Det er ikke absolutt nødvendig å teste alle CDene, men det anbefales " "sterkt. I det minste bør CD'ene testes før de brukes første gang. Etter at " "de har blitt testet og ingen feil ble funnet, er det ikke nødvendig å teste " "hver CD før neste gang de skal brukes." #: loader/cdinstall.c:229 #, c-format msgid "" "The %s disc was not found in any of your drives. Please insert the %s disc " "and press %s to retry." msgstr "" "%s CDen ble ikke funnet i noen av dine enheter. Sett inn %s CDen og trykk %s " "for å forsøke på nytt" #: loader/cdinstall.c:248 msgid "Disc Found" msgstr "Plate funnet" #: loader/cdinstall.c:249 #, c-format msgid "" "To begin testing the media before installation press %s.\n" "\n" "Choose %s to skip the media test and start the installation." msgstr "" "For å starte testing av CDene før installeringen trykk %s.\n" "\n" "Velg %s for å hoppe over denne testen og starte installasjonen." #: loader/cdinstall.c:330 msgid "Scanning" msgstr "Søker" #: loader/cdinstall.c:330 #, c-format msgid "Looking for installation images on CD device %s\n" msgstr "Ser etter installasjonsbilder på CD-enhet %s\n" #: loader/cdinstall.c:332 #, c-format msgid "Looking for installation images on CD device %s" msgstr "Ser etter installasjonsbilder på CD-enhet %s" #: loader/cdinstall.c:424 #, c-format msgid "" "The %s disc was not found in any of your CDROM drives. Please insert the %s " "disc and press %s to retry." msgstr "" "%s CDen ble ikke funnet i noen av dine CD-ROM-stasjoner. Sett inn %s CDen og " "press %s for å forsøke på nytt" #: loader/cdinstall.c:430 msgid "Disc Not Found" msgstr "Disk ikke funnet" #: loader/cdinstall.c:431 loader/driverdisk.c:423 loader/driverdisk.c:461 #: loader/driverdisk.c:542 loader/driverselect.c:79 loader/driverselect.c:153 #: loader/driverselect.c:179 loader/hdinstall.c:206 loader/hdinstall.c:260 #: loader/kbd.c:119 loader/loader.c:506 loader/loader.c:523 #: loader/loader.c:1375 loader/loader.c:1408 loader/net.c:578 loader/net.c:949 #: loader/net.c:1848 loader/net.c:1867 loader/nfsinstall.c:91 #: loader/urls.c:259 storage/__init__.py:157 storage/devicetree.py:90 #: textw/constants_text.py:52 msgid "Back" msgstr "Tilbake" #: loader/cdinstall.c:505 msgid "Cannot find kickstart file on CDROM." msgstr "Kan ikke finne kickstart-fil på CD-ROM." #: loader/copy.c:51 loader/method.c:278 #, c-format msgid "Failed to read directory %s: %m" msgstr "Kunne ikke lese katalog %s: %m" #: loader/driverdisk.c:304 msgid "Loading" msgstr "Laster" #: loader/driverdisk.c:304 msgid "Reading driver disk" msgstr "Leser driverdisk" #: loader/driverdisk.c:417 loader/driverdisk.c:456 msgid "Driver Disk Source" msgstr "Kilde for driverdisk" #: loader/driverdisk.c:418 msgid "" "You have multiple devices which could serve as sources for a driver disk. " "Which would you like to use?" msgstr "" "Du har flere enheter som kan være kilde for en driverdisk. Hvilken vil du " "bruke?" #: loader/driverdisk.c:457 msgid "" "There are multiple partitions on this device which could contain the driver " "disk image. Which would you like to use?" msgstr "" "Det er flere partisjoner på denne stasjonen som kan inneholde " "driverdisketten. Hvilken vil du bruke?" #: loader/driverdisk.c:492 msgid "Failed to mount partition." msgstr "Kunne ikke montere partisjonen." #: loader/driverdisk.c:497 msgid "Select driver disk image" msgstr "Velg driverdisk" #: loader/driverdisk.c:498 msgid "Select the file which is your driver disk image." msgstr "Velg filen som er din driverdiskett." #: loader/driverdisk.c:527 msgid "Failed to load driver disk from file." msgstr "Kunne ikke laste driverdiskett fra fil." #: loader/driverdisk.c:539 #, c-format msgid "Insert your driver disk into /dev/%s and press \"OK\" to continue." msgstr "Sett inn driverdisken i /dev/%s og trykk «OK» for å fortsette." #: loader/driverdisk.c:542 msgid "Insert Driver Disk" msgstr "Sett inn driverdisk" #: loader/driverdisk.c:555 msgid "Failed to mount driver disk." msgstr "Kunne ikke montere driverdisketten." #: loader/driverdisk.c:563 #, c-format msgid "Driver disk is invalid for this release of %s." msgstr "Driverdisken er ugyldig for denne versjonen av %s." #: loader/driverdisk.c:626 msgid "Manually choose" msgstr "Velg manuelt" #: loader/driverdisk.c:627 msgid "Load another disk" msgstr "Last en annen disk" #: loader/driverdisk.c:628 msgid "" "No devices of the appropriate type were found on this driver disk. Would " "you like to manually select the driver, continue anyway, or load another " "driver disk?" msgstr "" "Ingen enheter av passende type ble funnet på denne driverdisketten. Vil du " "velge driveren manuelt, fortsette likevel, eller laste en ny driverdiskett?" #: loader/driverdisk.c:666 msgid "Driver disk" msgstr "Driverdisk" #: loader/driverdisk.c:667 msgid "Do you have a driver disk?" msgstr "Har du en driverdisk?" #: loader/driverdisk.c:676 msgid "More Driver Disks?" msgstr "Flere driverdisker?" #: loader/driverdisk.c:677 msgid "Do you wish to load any more driver disks?" msgstr "Ønsker du å laste flere driverdisker?" #: loader/driverdisk.c:722 loader/driverdisk.c:761 loader/hdinstall.c:352 #: loader/kickstart.c:132 loader/kickstart.c:142 loader/kickstart.c:184 #: loader/kickstart.c:189 loader/kickstart.c:510 loader/modules.c:382 #: loader/modules.c:398 loader/net.c:1557 loader/net.c:1578 #: loader/nfsinstall.c:366 loader/urlinstall.c:372 loader/urlinstall.c:383 #: loader/urlinstall.c:390 msgid "Kickstart Error" msgstr "Kickstart-feil" #: loader/driverdisk.c:723 #, c-format msgid "Unknown driver disk kickstart source: %s" msgstr "Ukjent kickstart-kilde for driverdisk: %s" #: loader/driverdisk.c:762 #, fuzzy, c-format msgid "" "The following invalid argument was specified for the kickstart driver disk " "command: %s" msgstr "" "Følgende ugyldig argument ble oppgitt for kommando for driverdisk i " "kickstart: %s:%s" #: loader/driverselect.c:68 #, c-format msgid "" "Please enter any parameters which you wish to pass to the %s module " "separated by spaces. If you don't know what parameters to supply, skip this " "screen by pressing the \"OK\" button." msgstr "" "Vennligst oppgi eventuelle parametere du ønsker å gi til modulen %s skilt " "med mellomrom. Hvis du ikke vet hvilke parametere du skal oppgi, kan du " "hoppe over denne skjermen ved å trykke «OK»-knappen." #: loader/driverselect.c:89 msgid "Enter Module Parameters" msgstr "Oppgi parametere for moduler" #: loader/driverselect.c:152 msgid "No drivers found" msgstr "Ingen drivere funnet" #: loader/driverselect.c:152 msgid "Load driver disk" msgstr "Last driverdisk" #: loader/driverselect.c:153 msgid "" "No drivers were found to manually insert. Would you like to use a driver " "disk?" msgstr "" "Ingen drivere ble funnet for manuell innlasting. Vil du bruke en " "driverdiskett?" #: loader/driverselect.c:171 msgid "" "Please select the driver below which you wish to load. If it does not " "appear and you have a driver disk, press F2." msgstr "" "Vennligst velg hvilken driver du vil laste. Trykk F2 hvis driveren du " "trenger ikke finnes på denne listen og du har en driverdiskett." #: loader/driverselect.c:180 msgid "Specify optional module arguments" msgstr "Spesifiser alternative parametere for modul" #: loader/driverselect.c:205 msgid "Select Device Driver to Load" msgstr "Velg enhetsdriver som skal lastes" #: loader/hdinstall.c:116 #, fuzzy msgid "" "An error occured finding the installation image on your hard drive. Please " "check your images and try again." msgstr "" "En feil oppstod ved lesing av installasjonen fra ISO-filene. Sjekk ISO-" "filene og prøv på nytt." #: loader/hdinstall.c:207 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "Det ser ikke ut som om du har noen harddisker på systemet ditt! Ønsker du å " "konfigurere flere enheter?" #: loader/hdinstall.c:220 #, fuzzy, c-format msgid "" "What partition and directory on that partition holds the installation image " "for %s? If you don't see the disk drive you're using listed here, press F2 " "to configure additional devices." msgstr "" "Hvilken partisjon og hvilken katalog på denne partisjonen inneholder CD-" "filene (iso9660) for %s? Hvis du ikke ser disken du bruker på denne listen, " "trykk F2 for å konfigurere flere enheter." #: loader/hdinstall.c:244 msgid "Directory holding image:" msgstr "Katalog som inneholder bilde:" #: loader/hdinstall.c:272 msgid "Select Partition" msgstr "Velg partisjon" #: loader/hdinstall.c:319 #, c-format msgid "Device %s does not appear to contain an installation image." msgstr "Enhet %s ser ikke ut til å inneholde et installasjonsbilde." #: loader/hdinstall.c:353 #, fuzzy, c-format msgid "Bad argument to HD kickstart method command: %s" msgstr "Ugyldig argument til HD-kommando for kickstart %s: %s" #: loader/hdinstall.c:425 loader/hdinstall.c:481 msgid "Cannot find kickstart file on hard drive." msgstr "Kan ikke finne kickstart-fil på harddisken." #: loader/hdinstall.c:468 #, c-format msgid "Cannot find hard drive for BIOS disk %s" msgstr "Kan ikke finne harddisk for BIOS-disk %s" #: loader/kbd.c:117 msgid "Keyboard Type" msgstr "Tastaturtype" #: loader/kbd.c:118 msgid "What type of keyboard do you have?" msgstr "Hvilken type tastatur har du?" #: loader/kickstart.c:133 #, c-format msgid "Error opening kickstart file %s: %m" msgstr "Feil under åpning av kickstart-fil %s: %m" #: loader/kickstart.c:143 #, c-format msgid "Error reading contents of kickstart file %s: %m" msgstr "Feil under lesing av innholdet i kickstart-fil %s: %m" #: loader/kickstart.c:185 #, c-format msgid "Error in %s on line %d of kickstart file %s." msgstr "Feil i %s på linje %d i kickstart-fil %s." #: loader/kickstart.c:190 #, fuzzy, c-format msgid "Missing options on line %d of kickstart file %s." msgstr "Feil i %s på linje %d i kickstart-fil %s." #: loader/kickstart.c:297 msgid "Cannot find ks.cfg on removable media." msgstr "Kan ikke finne ks.cfg på avtagbart medie." #: loader/kickstart.c:333 msgid "" "Unable to download the kickstart file. Please modify the kickstart " "parameter below or press Cancel to proceed as an interactive installation." msgstr "" "Kan ikke laste ned kickstart-filen. Vennligst endre kickstart-parametrene " "under, eller velg \"Avbryt\" for å fortsette som en interaktiv installasjon." #: loader/kickstart.c:342 msgid "Error downloading kickstart file" msgstr "Feil under nedlasting av kickstart-fil" #: loader/kickstart.c:511 #, fuzzy, c-format msgid "Bad argument to shutdown kickstart method command: %s" msgstr "Ugyldig argument til kommando for nedstenging av kickstart %s: %s" #: loader/lang.c:63 loader/loader.c:223 #, c-format msgid "Welcome to %s for %s" msgstr "Velkommen til %s for %s" #: loader/lang.c:64 #, c-format msgid "Welcome to %s for %s - Rescue Mode" msgstr "Velkommen til %s for %s - redningsmodus" #: loader/lang.c:65 loader/loader.c:247 msgid "" " / between elements | selects | next screen " msgstr "" " /Alt-Tab> mellom elementer | velger | neste skjerm " #: loader/lang.c:370 msgid "Choose a Language" msgstr "Velg et språk" #: loader/loader.c:130 msgid "Local CD/DVD" msgstr "Lokal CD/DVD" #: loader/loader.c:131 msgid "Hard drive" msgstr "Harddisk" #: loader/loader.c:132 msgid "NFS directory" msgstr "NFS-katalog" #: loader/loader.c:460 loader/loader.c:501 msgid "Update Disk Source" msgstr "Oppdater diskkilde" #: loader/loader.c:461 msgid "" "You have multiple devices which could serve as sources for an update disk. " "Which would you like to use?" msgstr "" "Du har flere enheter som kan tjene som kilde for en oppdateringsdisk. " "Hvilken vil du bruke?" #: loader/loader.c:502 msgid "" "There are multiple partitions on this device which could contain the update " "disk image. Which would you like to use?" msgstr "" "Det er flere partisjoner på denne enheten som kan inneholde diskbildet for " "driveroppdateringer. Hvilken vil du bruke?" #: loader/loader.c:520 #, c-format msgid "Insert your updates disk into %s and press \"OK\" to continue." msgstr "Sett inn oppdateringsdisketten i %s og trykk «OK» for å fortsette." #: loader/loader.c:523 msgid "Updates Disk" msgstr "Oppdateringsdiskett" #: loader/loader.c:541 msgid "Failed to mount updates disk" msgstr "Kunne ikke montere oppdateringsdisketten" #: loader/loader.c:546 msgid "Updates" msgstr "Oppdateringer" #: loader/loader.c:546 msgid "Reading anaconda updates" msgstr "Leser anaconda-oppdateringer" #: loader/loader.c:582 msgid "" "Unable to download the updates image. Please modify the updates location " "below or press Cancel to proceed without updates.." msgstr "" "Kan ikke laste ned oppdateringsbildet. Vennligst endre lokasjonen under, " "eller velg «Avbryt» for å fortsette uten oppdateringer." #: loader/loader.c:591 msgid "Error downloading updates image" msgstr "Feil under nedlasting av oppdateringsbilde" #: loader/loader.c:1190 #, c-format msgid "You do not have enough RAM to install %s on this machine." msgstr "Du har ikke nok RAM til å installere %s på denne maskinen." #: loader/loader.c:1244 msgid "Media Detected" msgstr "Medie funnet" #: loader/loader.c:1245 msgid "Found local installation media" msgstr "Lokalt installasjonsmedie funnet" #: loader/loader.c:1367 msgid "Rescue Method" msgstr "Redningsmetode" #: loader/loader.c:1368 msgid "Installation Method" msgstr "Installasjonsmetode" #: loader/loader.c:1370 msgid "What type of media contains the rescue image?" msgstr "Hvilken type media inneholder redningsbildet?" #: loader/loader.c:1372 msgid "What type of media contains the installation image?" msgstr "Hvilken type media inneholder installasjonsbildet?" #: loader/loader.c:1407 msgid "No driver found" msgstr "Ingen driver funnet" #: loader/loader.c:1407 msgid "Select driver" msgstr "Velg driver" #: loader/loader.c:1408 msgid "Use a driver disk" msgstr "Bruk en driverdisk" #: loader/loader.c:1409 msgid "" "Unable to find any devices of the type needed for this installation type. " "Would you like to manually select your driver or use a driver disk?" msgstr "" "Kan ikke finne noen enhter av typen som kreves for denne installasjonstypen. " "Vil du velge din driver manuelt eller bruke en driverdiskett?" #: loader/loader.c:1637 msgid "The following devices have been found on your system." msgstr "Følgende enheter ble funnet på ditt system." #: loader/loader.c:1639 msgid "" "No device drivers have been loaded for your system. Would you like to load " "any now?" msgstr "" "Ingen enhetsdrivere er lastet for ditt system. Ønsker du å gjøre dette nå?" #: loader/loader.c:1643 msgid "Devices" msgstr "Enheter" #: loader/loader.c:1644 msgid "Done" msgstr "Ferdig" #: loader/loader.c:1645 msgid "Add Device" msgstr "Legg til enhet" #: loader/loader.c:1921 #, c-format msgid "loader has already been run. Starting shell.\n" msgstr "laster er allerede kjørt. Starter skall.\n" #: loader/loader.c:2361 #, c-format msgid "Running anaconda %s, the %s rescue mode - please wait.\n" msgstr "Kjører anaconda %s, feilrettingsmodus for %s - vennligst vent.\n" #: loader/loader.c:2363 #, c-format msgid "Running anaconda %s, the %s system installer - please wait.\n" msgstr "Kjører anaconda %s, installeringsprogrammet for %s - vennligst vent.\n" #: loader/mediacheck.c:47 #, c-format msgid "Unable to find install image %s" msgstr "Fant ikke installasjonsbilde %s" #: loader/mediacheck.c:53 #, c-format msgid "Checking \"%s\"." msgstr "Kontrollerer «%s»." #: loader/mediacheck.c:55 #, c-format msgid "Checking media." msgstr "Sjekker media." #: loader/mediacheck.c:87 #, fuzzy msgid "" "Unable to find the checksum in the image. This probably means the disc was " "created without adding the checksum." msgstr "" "Klarte ikke å lese CDens sjekksum fra primær volum-beskrivelse. Dette betyr " "sannsynligvis at at CDen ble laget uten å legge inn sjekksum." #: loader/mediacheck.c:94 #, fuzzy msgid "Unable to open the image." msgstr "Fant ikke bilde" #: loader/mediacheck.c:98 msgid "" "The image which was just tested has errors. This could be due to a corrupt " "download or a bad disc. If applicable, please clean the disc and try " "again. If this test continues to fail you should not continue the install." msgstr "" "Bildet som ble testet inneholder feil. Dette kan være pga. en korrupt " "nedlasting eller en dårlig plate. Hvis mulig, rens CD'en og prøv igjen. Hvis " "denne testen fortsatt feiler bør du ikke fortsette installasjonen." #: loader/mediacheck.c:106 msgid "Success" msgstr "Suksess" #: loader/mediacheck.c:107 msgid "" "The image which was just tested was successfully verified. It should be OK " "to install from this media. Note that not all media/drive errors can be " "detected by the media check." msgstr "" #: loader/method.c:321 #, c-format msgid "" "Would you like to perform a checksum test of the ISO image:\n" "\n" " %s?" msgstr "" "Ønsker du å teste sjekksummen av ISO-filen:\n" "\n" " %s?" #: loader/method.c:324 msgid "Checksum Test" msgstr "Test av sjekksum" #: loader/modules.c:383 #, fuzzy, c-format msgid "Bad argument to device kickstart method command: %s" msgstr "Ugyldig argument til enhetskommando for kickstart %s: %s" #: loader/modules.c:399 msgid "A module name must be specified for the kickstart device command." msgstr "Navn på modul må oppgis for enhetskommandoen for kickstart." #: loader/net.c:109 msgid "Invalid Prefix" msgstr "Ugyldig prefiks" #: loader/net.c:110 msgid "" "Prefix must be between 1 and 32 for IPv4 networks or between 1 and 128 for " "IPv6 networks" msgstr "" "Prefiks må være mellom 1 og 32 for IPv4-nettverk eller mellom 1 og 128 for " "IPv6-nettverk" #: loader/net.c:463 loader/net.c:471 loader/net.c:526 #, c-format msgid "There was an error configuring your network interface." msgstr "Det oppsto en feil under konfigurasjon av nettverksgrensesnittet." #: loader/net.c:465 #, c-format msgid "" "\n" "This cannot be corrected in cmdline mode.\n" "Halting.\n" msgstr "" #: loader/net.c:470 loader/net.c:525 msgid "Network Error" msgstr "Nettverksfeil" #: loader/net.c:556 textw/netconfig_text.py:133 msgid "Enable IPv4 support" msgstr "Aktiver støtte for IPv4" #: loader/net.c:570 msgid "Enable IPv6 support" msgstr "Aktiver støtte for IPv6" #: loader/net.c:610 msgid "Configure TCP/IP" msgstr "Konfigurer TCP/IP" #: loader/net.c:667 msgid "Missing Protocol" msgstr "Mangler protokoll" #: loader/net.c:668 msgid "You must select at least one protocol (IPv4 or IPv6)." msgstr "Du må velge minst en protokoll (IPv4 eller IPv6)." #: loader/net.c:675 msgid "IPv4 Needed for NFS" msgstr "IPv4 kreves for NFS" #: loader/net.c:676 msgid "NFS installation method requires IPv4 support." msgstr "NFS-installasjonsmetoden krever støtte for IPv4." #: loader/net.c:775 msgid "IPv4 address:" msgstr "IPv4-adresse:" #: loader/net.c:787 loader/net.c:854 msgid "/" msgstr "/" #: loader/net.c:842 msgid "IPv6 address:" msgstr "IPv6-adresse:" #: loader/net.c:908 textw/netconfig_text.py:160 msgid "Gateway:" msgstr "Gateway:" #: loader/net.c:916 msgid "Name Server:" msgstr "Navnetjener:" #: loader/net.c:955 msgid "" "Enter the IPv4 and/or the IPv6 address and prefix (address / prefix). For " "IPv4, the dotted-quad netmask or the CIDR-style prefix are acceptable. The " "gateway and name server fields must be valid IPv4 or IPv6 addresses." msgstr "" "Angi IPv4- og/eller IPv6-adressen og prefiks (adresse / prefiks). For IPv4 " "erpunkt-kvadruppel nettmaske eller prefiks i CIDR-stil tillatt. Feltet " "gateway og navnetjener må være gyldige IPv4- eller IPv6-adresser." #: loader/net.c:972 msgid "Manual TCP/IP Configuration" msgstr "Manuell TCP/IP-konfigurasjon" #: loader/net.c:1096 loader/net.c:1104 msgid "Missing Information" msgstr "Manglende informasjon" #: loader/net.c:1097 msgid "" "You must enter both a valid IPv4 address and a network mask or CIDR prefix." msgstr "" "Du må skrive inn en gyldig IPv4-adresse og en nettmaske eller et CIDR-" "prefiks." #: loader/net.c:1105 msgid "You must enter both a valid IPv6 address and a CIDR prefix." msgstr "Du må skrive inn både en gyldig IPv6-adresse og et CIDR-prefiks." #: loader/net.c:1558 #, fuzzy, c-format msgid "Bad argument to kickstart network command: %s" msgstr "Ugyldig argument til nettverks-kommando for kickstart %s: %s" #: loader/net.c:1579 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "Ugyldig bootproto %s spesifisert i nettverkskommandoen" #: loader/net.c:1656 msgid "Seconds:" msgstr "Sekunder:" #: loader/net.c:1843 msgid "Networking Device" msgstr "Nettverksenhet" #: loader/net.c:1844 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" "Du har flere nettverksenheter på dette systemet. Hvilken enhet skal du bruke " "til installasjonen?" #: loader/net.c:1848 msgid "Identify" msgstr "Identifiser" #: loader/net.c:1857 msgid "You can identify the physical port for" msgstr "Du kan identifisere fysisk port for" #: loader/net.c:1859 msgid "" "by flashing the LED lights for a number of seconds. Enter a number between " "1 and 30 to set the duration to flash the LED port lights." msgstr "" #: loader/net.c:1866 msgid "Identify NIC" msgstr "Identifiser nettverkskort" #: loader/net.c:1879 msgid "Invalid Duration" msgstr "Ugyldig varighet" #: loader/net.c:1880 msgid "You must enter the number of seconds as an integer between 1 and 30." msgstr "Du må oppgi antall sekunder som et heltall mellom 1 og 30." #: loader/net.c:1892 #, c-format msgid "Flashing %s port lights for %d seconds." msgstr "Blinker med lysene for port %s i %d sekunder." #: loader/net.c:2061 loader/net.c:2065 #, c-format msgid "Waiting for NetworkManager to configure %s.\n" msgstr "Venter på at NetworkManager skal konfigurere %s.\n" #: loader/nfsinstall.c:68 msgid "NFS server name:" msgstr "Navn på NFS-tjener:" #: loader/nfsinstall.c:72 #, c-format msgid "%s directory:" msgstr "Katalog for %s:" #: loader/nfsinstall.c:76 msgid "NFS mount options (optional):" msgstr "" #: loader/nfsinstall.c:82 #, fuzzy, c-format msgid "" "Please enter the server and path to your %s installation image and " "optionally additional NFS mount options." msgstr "Vennligst oppgi navn på tjener og sti til ditt %s-installasjonsbilde." #: loader/nfsinstall.c:90 msgid "NFS Setup" msgstr "NFS-oppsett" #: loader/nfsinstall.c:280 msgid "That directory could not be mounted from the server." msgstr "Den katalogen kunne ikke monteres fra tjeneren." #: loader/nfsinstall.c:292 #, c-format msgid "That directory does not seem to contain a %s installation image." msgstr "Katalogen ser ikke ut til å inneholde et installasjonsbilde for %s." #: loader/nfsinstall.c:367 #, fuzzy, c-format msgid "Bad argument to NFS kickstart method command: %s" msgstr "Ugyldig argument til NFS-kommando for kickstart %s: %s" #: loader/telnetd.c:90 loader/telnetd.c:129 msgid "Telnet" msgstr "Telnet" #: loader/telnetd.c:90 msgid "Waiting for telnet connection." msgstr "Venter på telnet-forbindelse." #: loader/telnetd.c:129 msgid "Running anaconda via telnet." msgstr "Kjører anaconda via telnet." #: loader/urlinstall.c:138 #, fuzzy, c-format msgid "Unable to retrieve %s." msgstr "Kan ikke hente %s://%s%s." #: loader/urlinstall.c:222 msgid "Unable to retrieve the install image." msgstr "Kunne ikke hente installasjonsbildet." #: loader/urlinstall.c:373 #, fuzzy, c-format msgid "Bad argument to URL kickstart method command: %s" msgstr "Ugyldig argument til kommando for URL-kickstartmetode %s: %s" #: loader/urlinstall.c:384 msgid "Must supply a --url argument to Url kickstart method." msgstr "Må oppgi et --url argument til kickstartmetoden for URL." #: loader/urlinstall.c:391 #, c-format msgid "Unknown Url method %s" msgstr "Ukjent URL-metode %s" #: loader/urls.c:168 loader/urls.c:176 msgid "Retrieving" msgstr "Henter" #: loader/urls.c:262 #, fuzzy, c-format msgid "" "Please enter the URL containing the %s installation image on your server." msgstr "Vennligst oppgi URL som inneholder bildene for %s på din tjener." #: loader/urls.c:280 #, fuzzy msgid "Enable HTTP proxy" msgstr "Aktiver støtte for IPv4" #: loader/urls.c:294 #, fuzzy msgid "Proxy URL" msgstr "Ugyldig proxy-URL" #: loader/urls.c:299 #, fuzzy msgid "Username" msgstr "CHAP-brukernavn" #: loader/urls.c:304 #, fuzzy msgid "Password" msgstr "Passord:" #: loader/urls.c:323 msgid "URL Setup" msgstr "URL-oppsett" #: loader/urls.c:331 msgid "You must enter a URL." msgstr "Du må oppgi en URL." #: loader/urls.c:337 msgid "URL must be either an ftp or http URL" msgstr "URL må være enten ftp eller http" #: loader/windows.c:66 msgid "Loading SCSI driver" msgstr "Laster SCSI-driver" #: loader/windows.c:67 #, c-format msgid "Loading %s driver" msgstr "Laster driver %s" #: storage/__init__.py:108 msgid "Unknown Device" msgstr "Ukjent enhet" #: storage/__init__.py:109 #, fuzzy, python-format msgid "" "The installation source given by device %s could not be found. Please check " "your parameters and try again." msgstr "" "En feil oppstod ved lesing av installasjonen fra ISO-filene. Sjekk ISO-" "filene og prøv på nytt." #: storage/__init__.py:120 msgid "Installation cannot continue." msgstr "Installasjonen kan ikke fortsette." #: storage/__init__.py:121 #, fuzzy msgid "" "The storage configuration you have chosen has already been activated. You " "can no longer return to the disk editing screen. Would you like to continue " "with the installation process?" msgstr "" "Partisjoneringsalternativene du har valgt er allerede aktivert. Du vil ikke " "kunne gå tilbake til skjermen for redigering av disker. Vil du fortsette " "installasjonsprosessen?" #: storage/__init__.py:149 msgid "Encrypt device?" msgstr "Krypter enhet?" #: storage/__init__.py:150 msgid "" "You specified block device encryption should be enabled, but you have not " "supplied a passphrase. If you do not go back and provide a passphrase, block " "device encryption will be disabled." msgstr "" #: storage/__init__.py:173 msgid "Writing storage configuration to disk" msgstr "Skriver lagringskonfigurasjon til disk" #: storage/__init__.py:174 #, fuzzy msgid "" "The partitioning options you have selected will now be written to disk. Any " "data on deleted or reformatted partitions will be lost." msgstr "" "Partisjoneringsvalgene du har gjort vil nå skrives til disk. Data på " "slettede eller reformaterte partisjoner vil gå tapt." #: storage/__init__.py:179 msgid "Go _back" msgstr "Gå til_bake" #: storage/__init__.py:180 msgid "_Write changes to disk" msgstr "S_kriver endringer til disk" #: storage/__init__.py:199 msgid "Running..." msgstr "" #: storage/__init__.py:200 msgid "Storing encryption keys" msgstr "" #: storage/__init__.py:216 #, python-format msgid "Error storing an encryption key: %s\n" msgstr "" #: storage/__init__.py:359 msgid "Finding Devices" msgstr "Finner enheter" #: storage/__init__.py:360 msgid "Finding storage devices" msgstr "Finner lagringsenheter" #: storage/__init__.py:639 msgid "This partition is holding the data for the hard drive install." msgstr "Denne partisjonen inneholder data for harddisk-installasjonen." #: storage/__init__.py:644 msgid "You cannot delete a partition of a LDL formatted DASD." msgstr "Du kan ikke slette en partisjon fra en LDL-formatert DASD." #: storage/__init__.py:650 #, python-format msgid "This device is part of the RAID device %s." msgstr "Denne enheten er en del av RAID-enhet %s." #: storage/__init__.py:653 msgid "This device is part of a RAID device." msgstr "Denne enheten er en del av en RAID-enhet." #: storage/__init__.py:658 #, python-format msgid "This device is part of the LVM volume group '%s'." msgstr "Denne enheten er en del av LVM-volumgruppe «%s»." #: storage/__init__.py:661 msgid "This device is part of a LVM volume group." msgstr "Denne enheten er en del av en LVM-volumgruppe." #: storage/__init__.py:677 msgid "" "This device is an extended partition which contains logical partitions that " "cannot be deleted:\n" "\n" msgstr "" #: storage/__init__.py:953 #, python-format msgid "" "You have not defined a root partition (/), which is required for " "installation of %s to continue." msgstr "" "Du har ikke definert en rot-partisjon (/). Dette må gjøres før " "installasjonen av %s kan fortsette." #: storage/__init__.py:958 #, python-format msgid "" "Your root partition is less than 250 megabytes which is usually too small to " "install %s." msgstr "" "Din rot-partisjon er mindre enn 250 megabyte og dette er vanligvis for lite " "for å installere %s." #: storage/__init__.py:964 #, fuzzy, python-format msgid "" "Your / partition is less than %(min)s MB which is lower than recommended for " "a normal %(productName)s install." msgstr "" "Din %s-partisjon er mindre enn %s megabyte og dette er lavere enn anbefalt " "for en vanlig installasjon av %s." #: storage/__init__.py:974 #, python-format msgid "" "Your / partition does not match the the live image you are installing from. " "It must be formatted as %s." msgstr "" #: storage/__init__.py:981 #, fuzzy, python-format msgid "" "Your %(mount)s partition is less than %(size)s megabytes which is lower than " "recommended for a normal %(productName)s install." msgstr "" "Din %s-partisjon er mindre enn %s megabyte og dette er lavere enn anbefalt " "for en vanlig installasjon av %s." #: storage/__init__.py:1010 msgid "" "Installing on a USB device. This may or may not produce a working system." msgstr "" "Installerer på en USB-enhet. Det er ikke sikkert at dette gir et fungerende " "system." #: storage/__init__.py:1013 msgid "" "Installing on a FireWire device. This may or may not produce a working " "system." msgstr "" "Installerer på en FireWire-enhet. Det er ikke sikkert at dette gir et " "fungerende system." #: storage/__init__.py:1020 #, fuzzy msgid "" "You have not specified a swap partition. Due to the amount of memory " "present, a swap partition is required to complete installation." msgstr "" "Du har ikke spesifisert en swap-partisjon. Selv om det ikke er et strengt " "krav om dette i alle tilfeller, så vil det øke ytelsen for de fleste " "installasjoner." #: storage/__init__.py:1025 msgid "" "You have not specified a swap partition. Although not strictly required in " "all cases, it will significantly improve performance for most installations." msgstr "" "Du har ikke spesifisert en swap-partisjon. Selv om det ikke er et strengt " "krav om dette i alle tilfeller, så vil det øke ytelsen for de fleste " "installasjoner." #: storage/__init__.py:1032 #, python-format msgid "" "This mount point is invalid. The %s directory must be on the / file system." msgstr "" #: storage/__init__.py:1036 #, fuzzy, python-format msgid "The mount point %s must be on a linux file system." msgstr "Monteringspunktet «%s» er allerede i bruk. Velg et annet." #: storage/__init__.py:1047 msgid "No Drives Found" msgstr "Ingen stasjoner funnet" #: storage/__init__.py:1048 msgid "" "An error has occurred - no valid devices were found on which to create new " "file systems. Please check your hardware for the cause of this problem." msgstr "" "En feil har oppstått - ingen gyldige enheter for oppretting av filsystemer " "ble funnet. Sjekk maskinvaren din for å finne årsaken til problemet." #: storage/__init__.py:1330 storage/__init__.py:1339 msgid "Dirty File Systems" msgstr "Skitne filsystemer" #: storage/__init__.py:1331 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Please boot your Linux installation, let the file systems be " "checked and shut down cleanly to upgrade.\n" "%s" msgstr "" "Følgende filsystemer på ditt Linux-system ble ikke riktig avmontert. " "Vennligst start opp din Linux-installasjon, la filsystemene gå gjennom " "sjekk, og steng ned på riktig måte for å oppgradere.\n" "%s" #: storage/__init__.py:1340 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Would you like to mount them anyway?\n" "%s" msgstr "" "Følgende filsystemer på ditt Linux-system ble ikke riktig avmontert. Vil du " "montere dem likevel?\n" "%s" #: storage/__init__.py:1817 #, python-format msgid "" "The swap device:\n" "\n" " %s\n" "\n" "is an old-style Linux swap partition. If you want to use this device for " "swap space, you must reformat as a new-style Linux swap partition." msgstr "" #: storage/__init__.py:1828 #, fuzzy, python-format msgid "" "The swap device:\n" "\n" " %s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend device, " "which means your system is hibernating. To perform an upgrade, please shut " "down your system rather than hibernating it." msgstr "" "Swap-enhet:\n" "\n" " /dev/%s\n" "\n" "i din /etc/fstab-fil er i bruk som en partisjon for programvaresuspendering, " "noe som betyr at ditt system er i hvilemodus. For å utføre en oppgradering, " "vennligst slå av systemet, enn å sette det i hvilemodus." #: storage/__init__.py:1836 #, fuzzy, python-format msgid "" "The swap device:\n" "\n" " %s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend device, " "which means your system is hibernating. If you are performing a new install, " "make sure the installer is set to format all swap devices." msgstr "" "Swap-enhet:\n" "\n" " /dev/%s\n" "\n" "i din /etc/fstab-fil brukes i øyeblikket som en partisjon for " "programvaresuspendering, noe som betyr at ditt system er i hvilemodus. Hvis " "du utfører en ny installasjon, sjekk at installasjonsprogrammet er satt opp " "til å formatere alle swap-partisjonene." #: storage/__init__.py:1848 #, python-format msgid "" "The swap device:\n" "\n" " %s\n" "\n" "does not contain a supported swap volume. In order to continue " "installation, you will need to format the device or skip it." msgstr "" #: storage/__init__.py:1859 #, fuzzy, python-format msgid "" "Error enabling swap device %(name)s: %(msg)s\n" "\n" "The /etc/fstab on your upgrade partition does not reference a valid swap " "device.\n" "\n" "Press OK to exit the installer" msgstr "" "Feil under aktivering av swap-enhet %s: %s\n" "\n" "/etc/fstab-filen på partisjonen som skal oppgraderes inneholder ikke en " "gyldig referanse til en swap-enhet.\n" "\n" "Trykk OK for å avslutte installasjonsprogrammet" #: storage/__init__.py:1866 #, fuzzy, python-format msgid "" "Error enabling swap device %(name)s: %(msg)s\n" "\n" "This most likely means this swap device has not been initialized.\n" "\n" "Press OK to exit the installer." msgstr "" "Feil under aktivering av swap-enhet %s: %s\n" "\n" "Dette betyr sannsynligvis at swap-partisjonen ikke er initiert.\n" "\n" "Trykk OK for å avslutte installasjonsprogrammet." #: storage/__init__.py:1929 storage/__init__.py:1941 msgid "Invalid mount point" msgstr "Ugyldig monteringspunkt" #: storage/__init__.py:1930 #, python-format msgid "" "An error occurred when trying to create %s. Some element of this path is " "not a directory. This is a fatal error and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "En feil oppstod under oppretting av %s. Et element i denne stien er ikke en " "katalog. Dette problemet er så alvorlig at installasjonen ikke kan " "fortsette.\n" "\n" "Trykk for å avslutte installasjonsprogrammet." #: storage/__init__.py:1942 #, fuzzy, python-format msgid "" "An error occurred when trying to create %(mountpoint)s: %(msg)s. This is a " "fatal error and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "En feil oppstod under oppretting av %s: %s. Dette problemet er alvorlig, og " "installasjonen kan ikke fortsette.\n" "\n" "Trykk for å avslutte installasjonsprogrammet." #: storage/__init__.py:1958 storage/__init__.py:1982 msgid "Unable to mount filesystem" msgstr "Kan ikke montere filsystem" #: storage/__init__.py:1959 #, fuzzy, python-format msgid "" "An error occurred mounting device %(path)s as %(mountpoint)s. You may " "continue installation, but there may be problems." msgstr "" "En feil oppsto under montering av enhet %s som %s. Du kan fortsette " "installasjonen, men det kan ha oppstått problemer." #: storage/__init__.py:1983 #, fuzzy, python-format msgid "" "An error occurred mounting device %(path)s as %(mountpoint)s: %(msg)s. This " "is a fatal error and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "En feil oppstod under oppretting av %s: %s. Dette problemet er alvorlig, og " "installasjonen kan ikke fortsette.\n" "\n" "Trykk for å avslutte installasjonsprogrammet." #: storage/dasd.py:120 msgid "Unformatted DASD Device Found" msgid_plural "Unformatted DASD Devices Found" msgstr[0] "" msgstr[1] "" #: storage/dasd.py:122 #, python-format msgid "" "Format uninitialized DASD device?\n" "\n" "There is %d uninitialized DASD device on this system. To continue " "installation, the device must be formatted. Formatting will remove any data " "on this device." msgid_plural "" "Format uninitialized DASD devices?\n" "\n" "There are %d uninitialized DASD devices on this system. To continue " "installation, the devices must be formatted. Formatting will remove any " "data on these devices." msgstr[0] "" msgstr[1] "" #: storage/dasd.py:151 #, fuzzy msgid "Formatting DASD Device" msgid_plural "Formatting DASD Devices" msgstr[0] "Formatering feilet" msgstr[1] "Formatering feilet" #: storage/dasd.py:152 #, python-format msgid "Preparing %d DASD device for use with Linux..." msgid_plural "Preparing %d DASD devices for use with Linux..." msgstr[0] "" msgstr[1] "" #: storage/devicelibs/lvm.py:317 #, python-format msgid "vginfo failed for %s" msgstr "vginfo feilet for %s" #: storage/devicelibs/lvm.py:346 #, python-format msgid "lvs failed for %s" msgstr "lvs feilet for %s" #: storage/devices.py:1258 storage/devices.py:1929 storage/devices.py:2332 #: storage/devices.py:2803 storage/devices.py:3293 #, fuzzy msgid "Creating" msgstr "Formaterer" #: storage/devices.py:1259 storage/devices.py:1930 storage/devices.py:2333 #: storage/devices.py:2804 #, fuzzy, python-format msgid "Creating device %s" msgstr "_Bytt enhet" #: storage/devices.py:2426 #, python-format msgid "A RAID%d set requires atleast %d members" msgstr "" #: storage/devices.py:3294 #, fuzzy, python-format msgid "Creating file %s" msgstr "Lager filsystem på %s" #: storage/devicetree.py:99 msgid "Confirm" msgstr "Bekreft" #: storage/devicetree.py:100 #, python-format msgid "" "Are you sure you want to skip entering a passphrase for device %s?\n" "\n" "If you skip this step the device's contents will not be available during " "installation." msgstr "" #: storage/devicetree.py:1847 storage/devicetree.py:1895 msgid "This partition is part of an inconsistent LVM Volume Group." msgstr "Denne partisjonen er en del av en inkonsistent LVM-volumgruppe." #: storage/fcoe.py:67 storage/fcoe.py:68 msgid "Connecting to FCoE SAN" msgstr "" #: storage/fcoe.py:120 #, fuzzy msgid "FCoE not available" msgstr "iSCSI er ikke tilgjengelig" #: storage/formats/fs.py:102 msgid "filesystem configuration missing a type" msgstr "filsystemkonfigurasjon mangler en type" #: storage/formats/fs.py:354 storage/formats/luks.py:194 #: storage/formats/lvmpv.py:103 storage/formats/swap.py:161 msgid "Formatting" msgstr "Formaterer" #: storage/formats/fs.py:355 #, fuzzy, python-format msgid "Creating %s filesystem on %s" msgstr "Lager filsystem på %s" #: storage/formats/fs.py:463 msgid "Resizing" msgstr "Endrer størrelse" #: storage/formats/fs.py:464 #, python-format msgid "Resizing filesystem on %s" msgstr "Endrer størrelse for filsystem på %s" #: storage/formats/fs.py:499 #, fuzzy, python-format msgid "Unknown return code: %d." msgstr "Ukjent URL-metode %s" #: storage/formats/fs.py:513 msgid "Checking" msgstr "Sjekker" #: storage/formats/fs.py:514 #, python-format msgid "Checking filesystem on %s" msgstr "Sjekker filsystem på %s" #: storage/formats/fs.py:531 #, python-format msgid "%(type)s filesystem check failure on %(device)s: " msgstr "" #: storage/formats/fs.py:537 msgid "" "Errors like this usually mean there is a problem with the filesystem that " "will require user interaction to repair. Before restarting installation, " "reboot to rescue mode or another system that allows you to repair the " "filesystem interactively. Restart installation after you have corrected the " "problems on the filesystem." msgstr "" #: storage/formats/fs.py:545 storage/partitioning.py:275 msgid "Unrecoverable Error" msgstr "Fatal feil" #: storage/formats/fs.py:871 msgid "File system errors left uncorrected." msgstr "" #: storage/formats/fs.py:872 msgid "Operational error." msgstr "" #: storage/formats/fs.py:873 msgid "Usage or syntax error." msgstr "" #: storage/formats/fs.py:874 msgid "e2fsck cancelled by user request." msgstr "" #: storage/formats/fs.py:875 msgid "Shared library error." msgstr "" #: storage/formats/fs.py:1034 msgid "" "Recoverable errors have been detected or dosfsck has discovered an internal " "inconsistency." msgstr "" #: storage/formats/fs.py:1036 #, fuzzy msgid "Usage error." msgstr "Feil på målstasjon" #: storage/formats/luks.py:48 #, fuzzy msgid "Encrypted" msgstr "Krypt_er" #: storage/formats/luks.py:195 #, fuzzy, python-format msgid "Encrypting %s" msgstr "Krypt_er" #: storage/formats/lvmpv.py:104 storage/formats/swap.py:162 #, fuzzy, python-format msgid "Creating %s on %s" msgstr "Lager filsystem på %s" #: storage/iscsi.py:83 storage/iscsi.py:84 msgid "Scanning iSCSI nodes" msgstr "Søker gjennom iSCSI-noder" #: storage/iscsi.py:177 storage/iscsi.py:178 msgid "Initializing iSCSI initiator" msgstr "Initierer iSCSI-initiator" #: storage/iscsi.py:214 msgid "iSCSI not available" msgstr "iSCSI er ikke tilgjengelig" #: storage/iscsi.py:216 #, fuzzy msgid "No initiator name set" msgstr "Navn på iSCSI-initiator" #: storage/iscsi.py:230 msgid "No iSCSI nodes discovered" msgstr "Ingen iSCSI-noder oppdaget" #: storage/iscsi.py:233 storage/iscsi.py:234 msgid "Logging in to iSCSI nodes" msgstr "Logger inn på iSCSI-noder" #: storage/iscsi.py:260 msgid "No new iSCSI nodes discovered" msgstr "Ingen nye iSCSI-noder oppdaget" #: storage/iscsi.py:263 msgid "Could not log in to any of the discovered nodes" msgstr "Kunne ikke logge inn på noen av de oppdagete nodene" #: storage/partitioning.py:190 msgid "" "Could not find enough free space for automatic partitioning. Press 'OK' to " "exit the installer." msgstr "" #: storage/partitioning.py:193 msgid "" "Could not find enough free space for automatic partitioning, please use " "another partitioning method." msgstr "" #: storage/partitioning.py:222 msgid "Warnings During Automatic Partitioning" msgstr "Advarsler under automatisk partisjonering" #: storage/partitioning.py:224 #, python-format msgid "" "Following warnings occurred during automatic partitioning:\n" "\n" "%s" msgstr "" "Følgende advarsler ble gitt under automatisk partisjonering:\n" "\n" "%s" #: storage/partitioning.py:238 storage/partitioning.py:259 msgid "" "\n" "\n" "Press 'OK' to exit the installer." msgstr "" "\n" "\n" "Trykk «OK» for å avslutte installasjonsprogrammet." #: storage/partitioning.py:240 #, fuzzy, python-format msgid "" "Could not allocate requested partitions: \n" "\n" "%(msg)s.%(extra)s" msgstr "" "Kunne ikke allokere forespurte partisjoner: \n" "\n" "%s.%s" #: storage/partitioning.py:261 msgid "" "\n" "\n" "Press 'OK' to choose a different partitioning option." msgstr "" "\n" "\n" "Trykk «OK» for å velge et annet alternativ for partisjonering." #: storage/partitioning.py:263 msgid "Automatic Partitioning Errors" msgstr "Feil under automatisk partisjonering" #: storage/partitioning.py:264 #, fuzzy, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%(errortxt)s\n" "\n" "This can happen if there is not enough space on your hard drive(s) for the " "installation. %(extra)s" msgstr "" "Følgende feil oppstod med din partisjonering:\n" "\n" "%s\n" "\n" "Dette kan skje hvis det ikke er nok ledig plass på harddisken(e) for " "installasjonen. %s" #: storage/partitioning.py:276 msgid "The system will now reboot." msgstr "Systemet vil nå startes på nytt." #: storage/zfcp.py:50 msgid "You have not specified a device number or the number is invalid" msgstr "Enhetsnummeret er ikke gyldig eller ble ikke oppgitt" #: storage/zfcp.py:52 msgid "You have not specified a worldwide port name or the name is invalid." msgstr "Worldwide port er ugyldig eller ble ikke oppgitt." #: storage/zfcp.py:54 msgid "You have not specified a FCP LUN or the number is invalid." msgstr "FC-LUN er ugyldig eller ble ikke oppgitt." #: storage/zfcp.py:131 #, python-format msgid "Could not free zFCP device %(devnum)s from device ignore list (%(e)s)." msgstr "" #: storage/zfcp.py:137 #, python-format msgid "zFCP device %s not found, not even in device ignore list." msgstr "" #: storage/zfcp.py:149 #, python-format msgid "Could not set zFCP device %(devnum)s online (%(e)s)." msgstr "" #: storage/zfcp.py:160 #, python-format msgid "Could not add WWPN %(wwpn)s to zFCP device %(devnum)s (%(e)s)." msgstr "" #: storage/zfcp.py:167 #, python-format msgid "WWPN %(wwpn)s not found at zFCP device %(devnum)s." msgstr "" #: storage/zfcp.py:182 #, python-format msgid "" "Could not add LUN %(fcplun)s to WWPN %(wwpn)s on zFCP device %(devnum)s " "(%(e)s)." msgstr "" #: storage/zfcp.py:188 #, python-format msgid "" "LUN %(fcplun)s at WWPN %(wwpn)s on zFCP device %(devnum)s already configured." msgstr "" #: storage/zfcp.py:200 #, python-format msgid "" "Could not read failed attribute of LUN %(fcplun)s at WWPN %(wwpn)s on zFCP " "device %(devnum)s (%(e)s)." msgstr "" #: storage/zfcp.py:209 #, python-format msgid "" "Failed LUN %(fcplun)s at WWPN %(wwpn)s on zFCP device %(devnum)s removed " "again." msgstr "" #: storage/zfcp.py:266 #, python-format msgid "" "Could not correctly delete SCSI device of zFCP %(devnum)s %(wwpn)s " "%(fcplun)s (%(e)s)." msgstr "" #: storage/zfcp.py:275 #, python-format msgid "" "Could not remove LUN %(fcplun)s at WWPN %(wwpn)s on zFCP device %(devnum)s " "(%(e)s)." msgstr "" #: storage/zfcp.py:293 #, python-format msgid "Could not remove WWPN %(wwpn)s on zFCP device %(devnum)s (%(e)s)." msgstr "" #: storage/zfcp.py:319 #, python-format msgid "Could not set zFCP device %(devnum)s offline (%(e)s)." msgstr "" #: textw/complete_text.py:33 msgid " to exit" msgstr " for å avslutte" #: textw/complete_text.py:62 msgid "Complete" msgstr "Ferdig" #: textw/keyboard_text.py:48 msgid "Keyboard Selection" msgstr "Tastaturvalg" #: textw/keyboard_text.py:49 msgid "Which model keyboard is attached to this computer?" msgstr "Hvilken type tastatur brukes på denne datamaskinen?" #: textw/netconfig_text.py:43 #, python-format msgid "A value is required for the field %s" msgstr "En verdi kreves for felt %s" #: textw/netconfig_text.py:88 ui/netconfig.glade.h:1 msgid "Enable network interface" msgstr "Aktiver nettverksgrensesnitt" #: textw/netconfig_text.py:91 msgid "" "This requires that you have an active network connection during the " "installation process. Please configure a network interface." msgstr "" "Dette krever at du har en fungerende nettverkstilkobling under " "installasjonen. Vennligst konfigurer en nettverkstilkobling." #: textw/netconfig_text.py:130 msgid "Use dynamic IP configuration (DHCP)" msgstr "Bruk dynamisk konfigurasjon av IP (DHCP)" #: textw/netconfig_text.py:140 msgid "IPv4 Address:" msgstr "IPv4-adresse:" #: textw/netconfig_text.py:163 msgid "Nameserver:" msgstr "Navnetjener:" #: textw/netconfig_text.py:193 msgid "Missing Device" msgstr "Mangler enhet" #: textw/netconfig_text.py:194 msgid "You must select a network device" msgstr "Du må velge en nettverksenhet" #: textw/netconfig_text.py:253 msgid "IPv4 Network Mask " msgstr "IPv4-nettmaske " #: textw/netconfig_text.py:276 msgid "Configuring Network Interfaces" msgstr "Konfigurerer nettverksgrensesnitt" #: textw/netconfig_text.py:276 msgid "Waiting for NetworkManager" msgstr "Venter på NetworkManager" #: textw/netconfig_text.py:282 msgid "Error configuring network device" msgstr "Feil under konfigurasjon av nettverksenhet" #: textw/netconfig_text.py:282 #, fuzzy, python-format msgid "Error configuring network device %s" msgstr "Feil under konfigurasjon av nettverksenhet: " #: textw/partition_text.py:58 msgid "Partitioning Type" msgstr "Type partisjon" #: textw/partition_text.py:60 #, fuzzy msgid "" "Installation requires partitioning of your hard drive. The default layout " "is suitable for most users. Select what space to use and which drives to " "use as the install target." msgstr "" "Installasjonen krever partisjonering av harddisken. Forvalgt utforming av " "partisjoner er ok for de fleste brukere. Du kan velge å bruke denne eller " "lage din egen." #: textw/partition_text.py:63 msgid "Use entire drive" msgstr "Bruk hele stasjonen" #: textw/partition_text.py:64 msgid "Replace existing Linux system" msgstr "Erstatt eksisterende Linux-system" #: textw/partition_text.py:65 msgid "Use free space" msgstr "Bruk ledig plass" #: textw/partition_text.py:80 msgid "Which drive(s) do you want to use for this installation?" msgstr "Hvilke stasjoner vil du bruke til denne installasjonen?" #: textw/partition_text.py:95 msgid ",<+>,<-> selection | Add drive | next screen" msgstr "" ",<+>,<-> valg | Legg til disk | neste skjerm" #: textw/partition_text.py:173 msgid "Advanced Storage Options" msgstr "Avanserte alternativer for lagring" #: textw/partition_text.py:174 msgid "How would you like to modify your drive configuration?" msgstr "Hvordan ønsker du å endre konfigurasjonen for stasjonen?" #: textw/partition_text.py:203 msgid "Add FCP Device" msgstr "Legg til FCP-enhet" #: textw/partition_text.py:204 ui/zfcp-config.glade.h:5 msgid "" "zSeries machines can access industry-standard SCSI devices via Fibre Channel " "(FCP). You need to provide a 16 bit device number, a 64 bit World Wide Port " "Name (WWPN), and a 64 bit FCP LUN for each device." msgstr "" "zSeries-maskiner kan aksessere industristandard SCSI-enheter via Fibre " "Channel (FCP). Du må oppgi et 16-bit enhetsnummer, en 64-bit World Wide Port " "Number (WWPN) og et 64-bit FCP-LUN for hver enhet." #: textw/partition_text.py:228 msgid "No network cards present." msgstr "" #: textw/partition_text.py:231 msgid "Add FCoE SAN" msgstr "Legg til FCoE SAN" #: textw/partition_text.py:235 msgid "Select which NIC is connected to the FCoE SAN." msgstr "" #: textw/partition_text.py:251 ui/fcoe-config.glade.h:5 msgid "Use DCB" msgstr "" #: textw/partition_text.py:280 ui/iscsi-config.glade.h:7 msgid "Configure iSCSI Parameters" msgstr "Konfigurer parametere for iSCSI" #: textw/partition_text.py:281 ui/iscsi-config.glade.h:8 msgid "" "To use iSCSI disks, you must provide the address of your iSCSI target and " "the iSCSI initiator name you've configured for your host." msgstr "" "For å bruke iSCSI-disker, må du oppgi adressen til ditt iSCSI-mål og iSCSI-" "initiatorens navn, som du har konfigurert for din maskin." #: textw/partition_text.py:282 msgid "Target IP Address" msgstr "IP-adresse for mål" #: textw/partition_text.py:283 msgid "iSCSI Initiator Name" msgstr "Navn på iSCSI-initiator" #: textw/partition_text.py:284 msgid "CHAP username" msgstr "CHAP-brukernavn" #: textw/partition_text.py:285 msgid "CHAP password" msgstr "CHAP-passord" #: textw/partition_text.py:286 msgid "Reverse CHAP username" msgstr "Omvendt CHAP-brukernavn" #: textw/partition_text.py:287 msgid "Reverse CHAP password" msgstr "Omvendt CHAP-passord" #: textw/progress_text.py:57 msgid "Package Installation" msgstr "Pakkeinstallasjon" #: textw/timezone_text.py:74 msgid "In which time zone are you located?" msgstr "I hvilken tidssone befinner du deg?" #: textw/timezone_text.py:92 msgid "System clock uses UTC" msgstr "Systemklokken bruker UTC" #: textw/upgrade_bootloader_text.py:116 textw/upgrade_bootloader_text.py:126 msgid "Update boot loader configuration" msgstr "Oppdater konfigurasjon av oppstartslaster" #: textw/upgrade_bootloader_text.py:129 msgid "Skip boot loader updating" msgstr "Hopp over oppdatering av oppstartslaster" #: textw/upgrade_bootloader_text.py:131 msgid "Create new boot loader configuration" msgstr "Lag ny konfigurasjon for oppstartslaster" #: textw/upgrade_text.py:125 msgid "Free Space" msgstr "Ledig diskplass" #: textw/upgrade_text.py:143 msgid "RAM detected (MB):" msgstr "Funnet RAM (MB):" #: textw/upgrade_text.py:146 msgid "Suggested size (MB):" msgstr "Anbefalt størrelse (MB):" #: textw/upgrade_text.py:149 msgid "Swap file size (MB):" msgstr "Størrelse på swapfil (MB):" #: textw/upgrade_text.py:157 msgid "Add Swap" msgstr "Legg til swap" #: textw/upgrade_text.py:182 msgid "The value you entered is not a valid number." msgstr "Størrelsen du oppgav er ikke et gyldig tall." #: textw/upgrade_text.py:214 msgid "Reinstall System" msgstr "Installer systemet på nytt" #: textw/upgrade_text.py:226 msgid "System to Upgrade" msgstr "System som skal oppgraderes" #: textw/upgrade_text.py:227 #, fuzzy msgid "" "There seem to be one or more existing Linux installations on your system.\n" "\n" "Please choose one to rescue, or select 'Reinstall System' to freshly install " "your system." msgstr "" "En eller flere eksisterende Linux-installasjoner ble funnet på systemet " "ditt.\n" "\n" "Vennligst velg hvilken som skal oppgraderes, eller velg «Installer systemet " "på nytt» for å installere helt på nytt." #: textw/userauth_text.py:30 msgid "Root Password" msgstr "Root-passord" #: textw/userauth_text.py:33 msgid "" "Pick a root password. You must type it twice to ensure you know it and do " "not make a typing mistake. " msgstr "" "Velg et root-passord. Du må skrive det inn to ganger for å være sikker på at " "du husker det og at du ikke skrev feil." #: textw/userauth_text.py:67 msgid "The root password must be at least 6 characters long." msgstr "Root-passordet må være minst 6 tegn langt." #: textw/userauth_text.py:84 textw/userauth_text.py:191 #, fuzzy, python-format msgid "" "You have provided a weak password: %s\n" "\n" "Would you like to continue with this password?" msgstr "" "Svakt passord oppgitt: %s\n" "\n" "Vil du fortsette med dette passordet?" #: textw/userauth_text.py:111 #, fuzzy msgid "User configuration" msgstr "VNC-konfigurasjon" #: textw/userauth_text.py:114 msgid "Setup a username for regular (non-administrative) use." msgstr "" #: textw/userauth_text.py:130 #, fuzzy msgid "Username:" msgstr "CHAP-brukernavn" #: textw/userauth_text.py:132 msgid "Full name:" msgstr "" #: textw/userauth_text.py:159 #, fuzzy msgid "User password must be at least 6 characters long." msgstr "Root-passordet må være minst 6 tegn langt." #: textw/userauth_text.py:172 textw/userauth_text.py:178 #, fuzzy msgid "Error with username" msgstr "Feil med vertsnavn" #: textw/userauth_text.py:173 #, fuzzy msgid "Username too short" msgstr "CHAP-brukernavn" #: textw/userauth_text.py:179 #, fuzzy msgid "" "Requested username contains non-ASCII characters or spaces, which are not " "allowed." msgstr "Oppgitt passord inneholder ugyldige tegn. Bruk kun ASCII-tegn." #: textw/welcome_text.py:29 #, python-format msgid "%s" msgstr "%s" #: textw/welcome_text.py:30 #, python-format msgid "" "Welcome to %s!\n" "\n" msgstr "" "Velkommen til %s!\n" "\n" #: textw/zipl_text.py:36 msgid "" "The z/IPL Boot Loader will be installed on your system after installation is " "complete. You can now enter any additional kernel and chandev parameters " "which your machine or your setup require." msgstr "" "Oppstartslasteren z/IPL vil bli installert på systemet ditt etter at " "installasjonen er ferdig. Du kan nå spesifisere nødvendige parametre for " "kjernen og chandev som ditt system eller oppsett krever." #: textw/zipl_text.py:68 msgid "z/IPL Configuration" msgstr "z/IPL-konfigurasjon" #: textw/zipl_text.py:76 textw/zipl_text.py:80 msgid "Chandev line " msgstr "Chandev-linje " #: liveinst/liveinst.desktop.in.h:1 msgid "Install" msgstr "Installer" #: liveinst/liveinst.desktop.in.h:2 msgid "Install the live CD to your hard disk" msgstr "Installer live-CD til din harddisk" #: liveinst/liveinst.desktop.in.h:3 msgid "Install to Hard Drive" msgstr "Installer til harddisk" #: liveinst:5 #, fuzzy msgid "Starting Install to Hard Drive" msgstr "Installer til harddisk" #: ui/GroupSelector.glade.h:1 msgid "" "Some packages associated with this group are not required to be installed " "but may provide additional functionality. Please choose the packages which " "you would like to have installed." msgstr "" #: ui/GroupSelector.glade.h:2 msgid "_Deselect" msgstr "_Velg bort" #: ui/GroupSelector.glade.h:3 msgid "_Deselect all optional packages" msgstr "_Velg bort alle valgfrie pakker" #: ui/GroupSelector.glade.h:4 msgid "_Optional packages" msgstr "_Valgfrie pakker" #: ui/GroupSelector.glade.h:5 msgid "_Select" msgstr "_Velg" #: ui/GroupSelector.glade.h:6 msgid "_Select all optional packages" msgstr "_Velg alle valgfrie pakker" #: ui/GroupSelector.glade.h:7 msgid "dialog1" msgstr "dialog1" #: ui/account.glade.h:1 msgid "Confirm:" msgstr "Bekreft:" #: ui/account.glade.h:2 msgid "Root Password:" msgstr "Root-passord:" #: ui/account.glade.h:3 msgid "" "The root account is used for administering the system. Enter a password for " "the root user." msgstr "" "Root-kontoen brukes for å adminsitrere systemet. Oppgi et passord for denne " "brukeren." #: ui/adddrive.glade.h:1 msgid "_Add drive" msgstr "_Legg til disk" #: ui/addrepo.glade.h:1 msgid "Repository _name:" msgstr "_Navn på lager:" #: ui/addrepo.glade.h:2 msgid "Repository _type:" msgstr "_Type lager:" #: ui/addrepo.glade.h:4 msgid "Configure _proxy" msgstr "Konfigurer _proxy" #: ui/addrepo.glade.h:5 msgid "" "HTTP/FTP\n" "CD/DVD\n" "NFS\n" "Hard Drive" msgstr "" "HTTP/FTP\n" "CD/DVD\n" "NFS\n" "Harddisk" #: ui/addrepo.glade.h:9 #, fuzzy msgid "" "Please provide the configuration information for this software repository." msgstr "Vennligst oppgi en plass du kan installere ekstra programvare fra." #: ui/addrepo.glade.h:10 msgid "Proxy U_RL (host:port)" msgstr "Proxy U_RL (vert:port)" #: ui/addrepo.glade.h:11 msgid "Proxy pass_word" msgstr "Passord for pro_xy" #: ui/addrepo.glade.h:12 msgid "Proxy u_sername" msgstr "Brukernavn for _proxy" #: ui/addrepo.glade.h:13 msgid "Repository _URL" msgstr "URL til lager" #: ui/addrepo.glade.h:14 msgid "Select A Directory" msgstr "Velg en katalog" #: ui/addrepo.glade.h:15 msgid "URL is a _mirror list" msgstr "URLen er en listte med _speil" #: ui/addrepo.glade.h:16 msgid "_Directory" msgstr "_Katalog" #: ui/addrepo.glade.h:17 msgid "_Options" msgstr "_Alternativer" #: ui/addrepo.glade.h:18 msgid "_Partition" msgstr "_Partisjon" #: ui/addrepo.glade.h:19 msgid "_Path" msgstr "St_i" #: ui/addrepo.glade.h:20 msgid "_Server" msgstr "_Tjener" #: ui/anaconda.glade.h:1 msgid "Reboo_t" msgstr "S_tart på nytt" #: ui/anaconda.glade.h:4 msgid "_Next" msgstr "_Neste" #: ui/autopart.glade.h:1 #, fuzzy msgid "Shrink partition _to size (in MB):" msgstr "Endre navn på _mål:" #: ui/autopart.glade.h:2 msgid "Volume to Shrink" msgstr "Volum som skal krympes" #: ui/autopart.glade.h:3 #, fuzzy msgid "" "Which partition would you like to shrink to make room for your installation?" msgstr "" "Hvilken partisjon vil du endre størrelse på for å lage plass til " "installasjonen?" #: ui/autopart.glade.h:4 msgid "Which type of installation would you like?" msgstr "" #: ui/autopart.glade.h:5 msgid "_Encrypt system" msgstr "Krypt_er systemet" #: ui/autopart.glade.h:6 msgid "_Shrink" msgstr "" #: ui/blwhere.glade.h:1 msgid "/boot" msgstr "/boot" #: ui/blwhere.glade.h:2 msgid "BIOS Drive Order" msgstr "BIOS-rekkefølge for enhetene" #: ui/blwhere.glade.h:3 msgid "Boot loader device" msgstr "Enhet for oppstartslaster" #: ui/blwhere.glade.h:4 msgid "First BIOS drive:" msgstr "Første BIOS-enhet:" #: ui/blwhere.glade.h:5 msgid "Fourth BIOS drive:" msgstr "Fjerde BIOS-enhet:" #: ui/blwhere.glade.h:6 msgid "MBR" msgstr "MBR" #: ui/blwhere.glade.h:7 msgid "Second BIOS drive:" msgstr "Andre BIOS-enhet:" #: ui/blwhere.glade.h:8 msgid "Third BIOS drive:" msgstr "Tredje BIOS-enhet:" #: ui/blwhere.glade.h:9 msgid "Where would you like to install the boot loader for your system?" msgstr "Hvor vil du installere oppstartslasteren for systemet?" #: ui/cleardisks.glade.h:1 msgid "Data Storage Devices (to be mounted only)" msgstr "" #: ui/cleardisks.glade.h:2 #, fuzzy msgid "Install Target Devices" msgstr "Installerer %s (%s)\n" #: ui/cleardisks.glade.h:3 msgid "" "Tip: Install target devices will be reformatted and wiped of any " "data. Make sure you have backups." msgstr "" #: ui/cleardisks.glade.h:4 msgid "" "Below are the storage devices you've selected to be a part of this " "installation. Please indicate using the arrows below which devices you'd " "like to use as data drives (these will not be formatted, only mounted) and " "which devices you'd like to use as system drives (these may be formatted)." msgstr "" #: ui/create-storage.glade.h:1 msgid "" "Create a RAID formatted partition" msgstr "" #: ui/create-storage.glade.h:2 msgid "" "Create a logical volume on selected " "volume group" msgstr "" #: ui/create-storage.glade.h:3 msgid "" "Create an LVM formatted partition" msgstr "" #: ui/create-storage.glade.h:4 msgid "" "Facilitates RAID device creation" msgstr "" #: ui/create-storage.glade.h:5 msgid "" "General purpose partition creation" msgstr "" #: ui/create-storage.glade.h:6 msgid "" "Requires at least 1 free LVM formatted " "partition" msgstr "" #: ui/create-storage.glade.h:7 msgid "" "Requires at least 2 free RAID formatted " "partitions" msgstr "" #: ui/create-storage.glade.h:8 #, fuzzy msgid "Create" msgstr "Ledig" #: ui/create-storage.glade.h:9 msgid "Create LVM" msgstr "" #: ui/create-storage.glade.h:10 #, fuzzy msgid "Create Partition" msgstr "Velg partisjon" #: ui/create-storage.glade.h:11 #, fuzzy msgid "Create Software RAID" msgstr "programvare RAID" #: ui/create-storage.glade.h:12 msgid "Create Storage" msgstr "" #: ui/create-storage.glade.h:13 #, fuzzy msgid "LVM Logical Volume" msgstr "Lag logisk volum" #: ui/create-storage.glade.h:14 #, fuzzy msgid "LVM Physical Volume" msgstr "_Logiske volumer" #: ui/create-storage.glade.h:15 #, fuzzy msgid "LVM Volume Group" msgstr "LVM-volumgrupper" #: ui/create-storage.glade.h:16 #, fuzzy msgid "RAID Clone" msgstr "RAID-alternativer" #: ui/create-storage.glade.h:18 #, fuzzy msgid "RAID Partition" msgstr "Legg til partisjon" #: ui/create-storage.glade.h:19 #, fuzzy msgid "Standard Partition" msgstr "Legg til partisjon" #: ui/detailed-dialog.glade.h:1 msgid "Info" msgstr "Informasjon" #: ui/detailed-dialog.glade.h:2 msgid "_Details" msgstr "_Detaljer" #: ui/fcoe-config.glade.h:1 #, fuzzy msgid "Configure FCoE Parameters" msgstr "Konfigurer parametere for iSCSI" #: ui/fcoe-config.glade.h:2 msgid "NIC:" msgstr "" #: ui/fcoe-config.glade.h:3 msgid "" "Please select the network interface which is connected to\n" "your FCoE switch." msgstr "" #: ui/fcoe-config.glade.h:6 #, fuzzy msgid "_Add FCoE Disk(s)" msgstr "Legg til FCoE SAN" #: ui/filter.glade.h:2 #, no-c-format msgid "%s devices (%s) selected out of %s devices (%s) total." msgstr "" #: ui/filter.glade.h:3 msgid "" "Tip: Selected drives will not be formatted unless you choose to do so " "later during installation. Also, note that post-installation you may mount " "drives you did not select here by modifying your /etc/fstab file." msgstr "" #: ui/filter.glade.h:4 #, fuzzy msgid "Add Advanced Target" msgstr "Avanserte alternativer for lagring" #: ui/filter.glade.h:5 #, fuzzy msgid "Basic Devices" msgstr "Enheter" #: ui/filter.glade.h:6 #, fuzzy msgid "Filter By:" msgstr "_Rapporter feil" #: ui/filter.glade.h:7 #, fuzzy msgid "Firmware RAID" msgstr "programvare RAID" #: ui/filter.glade.h:8 #, fuzzy msgid "Identifier:" msgstr "Identifiser" #: ui/filter.glade.h:9 msgid "" "Interconnect\n" "Vendor\n" "Identifier" msgstr "" #: ui/filter.glade.h:12 msgid "LUN:" msgstr "" #: ui/filter.glade.h:13 #, fuzzy msgid "Multipath Devices" msgstr "Duplisert enhet" #: ui/filter.glade.h:14 #, fuzzy msgid "Other SAN Devices" msgstr "_RAID-enheter" #: ui/filter.glade.h:15 msgid "" "Please select the drives you'd like to install the operating system on, as " "well as any drives you'd like to automatically mount on your system:" msgstr "" #: ui/filter.glade.h:16 msgid "" "Port / Target / LUN\n" "Target Identifier" msgstr "" #: ui/filter.glade.h:18 msgid "Port:" msgstr "" #: ui/filter.glade.h:19 msgid "Search" msgstr "" #: ui/filter.glade.h:20 msgid "Search By:" msgstr "" #: ui/filter.glade.h:21 msgid "Search Results:" msgstr "" #: ui/filter.glade.h:22 msgid "Show Identifiers that Include:" msgstr "" #: ui/filter.glade.h:23 msgid "Show Only Devices From:" msgstr "" #: ui/filter.glade.h:24 msgid "Show Only Devices Using:" msgstr "" #: ui/filter.glade.h:25 #, fuzzy msgid "Target:" msgstr "Målstasjon(er):" #: ui/iscsi-config.glade.h:1 msgid "CHAP _Password:" msgstr "CHAP _passord:" #: ui/iscsi-config.glade.h:2 msgid "CHAP _Username:" msgstr "CHAP br_ukernavn:" #: ui/iscsi-config.glade.h:3 msgid "Reverse CHAP P_assword:" msgstr "Omvendt CHAP-p_assord:" #: ui/iscsi-config.glade.h:4 msgid "Reverse CHAP U_sername:" msgstr "Omvendt CHAP-b_rukernavn:" #: ui/iscsi-config.glade.h:5 msgid "_Target IP Address:" msgstr "IP-adresse for _mål:" #: ui/iscsi-config.glade.h:6 msgid "iSCSI Initiator _Name:" msgstr "_Navn på iSCSI-initiator:" #: ui/iscsi-config.glade.h:9 msgid "_Add target" msgstr "Legg til _mål" #: ui/lukspassphrase.glade.h:1 #, fuzzy msgid "" "Also add this passphrase to all existing encrypted devices to streamline the " "boot process" msgstr "Bruk dette passordet for alle nye krypterte enheter" #: ui/lukspassphrase.glade.h:2 msgid "" "Choose a passphrase for this encrypted partition. You will be prompted for " "the passphrase during system boot." msgstr "" "Velg et passord for denne krypterte partisjonen. Du vil bli spurt om dette " "passordet når systemet startes." #: ui/lukspassphrase.glade.h:3 msgid "Confirm passphrase:" msgstr "Bekreft passord:" #: ui/lukspassphrase.glade.h:4 msgid "Enter passphrase for encrypted partition" msgstr "Oppgi passord for kryptert partisjon" #: ui/lukspassphrase.glade.h:5 msgid "Enter passphrase:" msgstr "Oppgi passord:" #: ui/network.glade.h:1 #, fuzzy msgid "Configure Network" msgstr "Feil under konfigurasjon av nettverksenhet" #: ui/network.glade.h:2 msgid "Hostname:" msgstr "Vertsnavn:" #: ui/network.glade.h:3 msgid "" "Please name this computer. The hostname identifies the computer on a " "network." msgstr "" #: ui/tasksel.glade.h:1 msgid "" "Please select any additional repositories that you want to use for software " "installation." msgstr "Velg hvilke ekstra lagre du vil installere programmer fra." #: ui/tasksel.glade.h:2 msgid "_Add additional software repositories" msgstr "_Legg til flere steder du kan installere programvare fra" #: ui/tasksel.glade.h:3 msgid "_Modify repository" msgstr "E_ndre lager" #: ui/zfcp-config.glade.h:1 msgid "Device number:" msgstr "Enhetsnummer:" #: ui/zfcp-config.glade.h:2 msgid "FCP LUN:" msgstr "FCP-LUN" #: ui/zfcp-config.glade.h:3 msgid "WWPN:" msgstr "WWPN:" #: ui/zfcp-config.glade.h:4 msgid "Add FCP device" msgstr "Legg til FCP-enhet" #: lang-table.h:1 msgid "Afrikaans" msgstr "" #: lang-table.h:2 msgid "Arabic" msgstr "" #: lang-table.h:3 msgid "Assamese" msgstr "" #: lang-table.h:4 msgid "Bengali" msgstr "" #: lang-table.h:5 msgid "Bengali(India)" msgstr "" #: lang-table.h:6 msgid "Bulgarian" msgstr "" #: lang-table.h:7 msgid "Catalan" msgstr "" #: lang-table.h:8 msgid "Chinese(Simplified)" msgstr "" #: lang-table.h:9 msgid "Chinese(Traditional)" msgstr "" #: lang-table.h:10 #, fuzzy msgid "Croatian" msgstr "Fortsett" #: lang-table.h:11 msgid "Czech" msgstr "" #: lang-table.h:12 msgid "Danish" msgstr "" #: lang-table.h:13 msgid "Dutch" msgstr "" #: lang-table.h:14 msgid "English" msgstr "" #: lang-table.h:15 msgid "Estonian" msgstr "" #: lang-table.h:16 msgid "Finnish" msgstr "" #: lang-table.h:17 #, fuzzy msgid "French" msgstr "Ledig" #: lang-table.h:18 msgid "German" msgstr "" #: lang-table.h:19 #, fuzzy msgid "Greek" msgstr "Ledig" #: lang-table.h:20 msgid "Gujarati" msgstr "" #: lang-table.h:21 msgid "Hebrew" msgstr "" #: lang-table.h:22 msgid "Hindi" msgstr "" #: lang-table.h:23 msgid "Hungarian" msgstr "" #: lang-table.h:24 msgid "Icelandic" msgstr "" #: lang-table.h:25 msgid "Iloko" msgstr "" #: lang-table.h:26 msgid "Indonesian" msgstr "" #: lang-table.h:27 msgid "Italian" msgstr "" #: lang-table.h:28 msgid "Japanese" msgstr "" #: lang-table.h:29 msgid "Kannada" msgstr "" #: lang-table.h:30 msgid "Korean" msgstr "" #: lang-table.h:31 msgid "Macedonian" msgstr "" #: lang-table.h:32 msgid "Maithili" msgstr "" #: lang-table.h:33 msgid "Malay" msgstr "" #: lang-table.h:34 msgid "Malayalam" msgstr "" #: lang-table.h:35 msgid "Marathi" msgstr "" #: lang-table.h:36 msgid "Nepali" msgstr "" #: lang-table.h:37 msgid "Norwegian(Bokmål)" msgstr "" #: lang-table.h:38 msgid "Northern Sotho" msgstr "" #: lang-table.h:39 msgid "Oriya" msgstr "" #: lang-table.h:40 msgid "Persian" msgstr "" #: lang-table.h:41 msgid "Polish" msgstr "" #: lang-table.h:42 msgid "Portuguese" msgstr "" #: lang-table.h:43 msgid "Portuguese(Brazilian)" msgstr "" #: lang-table.h:44 msgid "Punjabi" msgstr "" #: lang-table.h:45 msgid "Romanian" msgstr "" #: lang-table.h:46 msgid "Russian" msgstr "" #: lang-table.h:47 msgid "Serbian" msgstr "" #: lang-table.h:48 msgid "Serbian(Latin)" msgstr "" #: lang-table.h:49 msgid "Sinhala" msgstr "" #: lang-table.h:50 msgid "Slovak" msgstr "" #: lang-table.h:51 msgid "Slovenian" msgstr "" #: lang-table.h:52 msgid "Spanish" msgstr "" #: lang-table.h:53 msgid "Swedish" msgstr "" #: lang-table.h:54 msgid "Tajik" msgstr "" #: lang-table.h:55 msgid "Tamil" msgstr "" #: lang-table.h:56 msgid "Telugu" msgstr "" #: lang-table.h:57 msgid "Turkish" msgstr "" #: lang-table.h:58 msgid "Ukrainian" msgstr "" #: lang-table.h:59 msgid "Vietnamese" msgstr "" #: lang-table.h:60 msgid "Welsh" msgstr "" #: lang-table.h:61 msgid "Zulu" msgstr "" #: gentoo/livecd.py:65 #, fuzzy, python-format msgid "" "The given location [%s] isn't a valid %s live CD to use as an installation " "source." msgstr "" "Den angitte plassen er ikke en gyldig %s live-CD for å bruke som " "installasjonskilde." #: gentoo/livecd.py:108 #, fuzzy msgid "Recovering Gentoo." msgstr "VNC-konfigurasjon" #: gentoo/livecd.py:114 #, fuzzy msgid "Installing Gentoo onto hard drive." msgstr "Installerer oppstartslaster." #: gentoo/livecd.py:128 #, fuzzy msgid "Configuring Gentoo" msgstr "VNC-konfigurasjon" #: gentoo/livecd.py:158 msgid "Gentoo configuration complete" msgstr "" #: gentoo/utils.py:405 #, fuzzy msgid "Configuring System Services" msgstr "Konfigurerer nettverksgrensesnitt" #: gentoo/utils.py:684 msgid "An issue occured while installing" msgstr "" #: gentoo/utils.py:686 msgid "Meh." msgstr "" #: gentoo/utils.py:687 #, fuzzy msgid "Drivers installation issue" msgstr "Starter installasjonsprosess" #: gentoo/utils.py:716 #, fuzzy msgid "System Installation" msgstr "Etter installasjon" #: gentoo/utils.py:848 #, fuzzy msgid "Cleaning packages" msgstr "eldre pakker" #: gentoo/utils.py:873 #, fuzzy msgid "Cleaning package" msgstr "Manglende pakke" #: gentoo/utils.py:917 #, fuzzy msgid "Installation complete" msgstr "Installasjonsnøkkel" #: gentoo/utils.py:925 msgid "" "The following language packs are available for download (you need Internet), " "would you like to install them?" msgstr "" #: gentoo/utils.py:929 #, fuzzy msgid "Language packs download" msgstr "Pakkeinstallasjon" #: gentoo/utils.py:950 msgid "No language packs are available for download, sorry!" msgstr "" #: gentoo/utils.py:951 gentoo/utils.py:961 #, fuzzy msgid "Language packs" msgstr "Pakkeinstallasjon" #: gentoo/utils.py:960 msgid "No language packs are available for install, sorry!" msgstr "" #: gentoo/utils.py:970 #, fuzzy msgid "Downloading package" msgstr "Manglende pakke" #: gentoo/utils.py:979 #, fuzzy msgid "Installing package" msgstr "Installerer pakker" #: gentoo/utils.py:996 gentoo/utils.py:1006 msgid "Reordering Entropy mirrors" msgstr "" #: gentoo/utils.py:996 msgid "can take some time..." msgstr "" #: gentoo/utils.py:1034 msgid "No repositories specified in" msgstr "" #: gentoo/utils.py:1036 gentoo/utils.py:1041 gentoo/utils.py:1048 msgid "Repositories update" msgstr "" #: gentoo/utils.py:1040 msgid "Unhandled exception" msgstr "" #: gentoo/utils.py:1047 msgid "Cannot download repositories right now, no big deal" msgstr "" #: gentoo/utils.py:1170 #, fuzzy msgid "" "This medium contains many extra languages, would you like to keep them " "installed?" msgstr "Hvilket språk ønsker du å bruke under installeringen?" #: gentoo/utils.py:1173 #, fuzzy msgid "Language packs installation" msgstr "Pakkeinstallasjon" #: gentoo/utils.py:1184 msgid "Generating list of files to copy" msgstr "" #, fuzzy #~ msgid "Upgrade an Existing Installation" #~ msgstr "_Oppgrader en eksisterende installasjon" #~ msgid "Reboot" #~ msgstr "Start på nytt" #~ msgid "Install class forcing text mode installation" #~ msgstr "Installasjonsklassen krever installasjon i tekstmodus" #~ msgid "Device Resize Failed" #~ msgstr "Endring av størrelse for enhet feilet" #~ msgid "An error was encountered while resizing device %s." #~ msgstr "Det oppsto en feil under endring av størrelse på enhet %s." #~ msgid "Device Creation Failed" #~ msgstr "Oppretting av enhet feilet" #, fuzzy #~ msgid "An error was encountered while creating device %s." #~ msgstr "Det oppsto en feil under endring av størrelse på enhet %s." #~ msgid "Device Removal Failed" #~ msgstr "Fjerning av enhet feilet" #, fuzzy #~ msgid "An error was encountered while removing device %s." #~ msgstr "Det oppsto en feil under endring av størrelse på enhet %s." #, fuzzy #~ msgid "An error was encountered while setting up device %s." #~ msgstr "Det oppsto en feil under endring av størrelse på enhet %s." #, fuzzy #~ msgid "An error was encountered while formatting device %s." #~ msgstr "Det oppsto en feil under endring av størrelse på enhet %s." #~ msgid "Storage Activation Failed" #~ msgstr "Aktivering av lagring feilet" #, fuzzy #~ msgid "" #~ "An error was encountered while activating your storage configuration." #~ msgstr "" #~ "Følgende feil ble funnet under lesing av din kickstart-konfigurasjon:\n" #~ "\n" #~ "%s" #~ msgid "Invalid Key" #~ msgstr "Ugyldig nøkkel" #~ msgid "The key you entered is invalid." #~ msgstr "Nøkkelen du oppgav er ikke gyldig." #~ msgid "_Skip" #~ msgstr "_Hopp over" #~ msgid "The installer will now exit..." #~ msgstr "Installasjonsprogrammet avsluttes nå..." #, fuzzy #~ msgid "/boot is not on an ext2 filesystem." #~ msgstr "Oppstartbare partisjoner kan ikke ligge på et filsystem av type %s." #~ msgid "Please enter your %(instkey)s" #~ msgstr "Vennligst oppgi ditt %(instkey)s" #~ msgid "Skip entering %(instkey)s" #~ msgstr "Hopp over å angi %(instkey)s" #~ msgid "%s not found" #~ msgstr "%s ikke funnet" #~ msgid "%s %s installation" #~ msgstr "%s %s installasjon" #~ msgid "" #~ "The default installation of %s includes a set of software applicable for " #~ "general internet usage. What additional tasks would you like your system " #~ "to include support for?" #~ msgstr "" #~ "Forvalgt installasjon av %s inneholder et sett programmer som er " #~ "tilpasset vanlig bruk av internett. Hvilke tilleggsoppgaver ønsker du at " #~ "systemet skal inneholde støtte for?" #~ msgid "Office and Productivity" #~ msgstr "Kontor og produktivitet" #~ msgid "Software Development" #~ msgstr "Programvareutvikling" #~ msgid "Web Server" #~ msgstr "Webtjener" #~ msgid "Red Hat Enterprise Linux" #~ msgstr "Red Hat Enterprise Linux" #~ msgid "Office" #~ msgstr "Kontor" #~ msgid "Multimedia" #~ msgstr "Multimedia" #~ msgid "Web server" #~ msgstr "Webtjener" #~ msgid "Virtualization" #~ msgstr "Virtualisering" #~ msgid "Clustering" #~ msgstr "Klynge" #~ msgid "Storage Clustering" #~ msgstr "Lagringsklynge" #~ msgid "Installation Number" #~ msgstr "Installasjonsnummer" #~ msgid "%s: %s" #~ msgstr "%s: %s" #, fuzzy #~ msgid "" #~ "Do you really want to boot from a disk which is not used for installation?" #~ msgstr "" #~ "Vil du virkelig starte opp fra en disk som ikke brukes ved installasjonen?" #~ msgid "Rescanning disks" #~ msgstr "Søker etter disker på nytt" #~ msgid "_Install %s" #~ msgstr "_Installer %s" #~ msgid "The following installed system will be upgraded:" #~ msgstr "Følgende installert system vil bli oppgradert:" #~ msgid "Unknown" #~ msgstr "Ukjent" #~ msgid "Not supported" #~ msgstr "Ikke støttet" #~ msgid "LVM is NOT supported on this platform." #~ msgstr "LVM er IKKE støttet på denne plattformen." #~ msgid "Software RAID is NOT supported on this platform." #~ msgstr "Programvare-RAID er IKKE støttet på denne plattformen." #~ msgid "No RAID minor device numbers available" #~ msgstr "Ingen mindre enhetsnummer tilgjengelig for RAID" #~ msgid "" #~ "A software RAID device cannot be created because all of the available " #~ "RAID minor device numbers have been used." #~ msgstr "" #~ "En enhet for programvatre-RAID kan ikke opprettes fordi alle " #~ "tilgjengelige mindre enhetsnummer for RAID er brukt opp." #~ msgid "What do you want to do now?" #~ msgstr "Hva vil du gjøre nå?" #~ msgid "Create a RAID _device [default=/dev/md%s]." #~ msgstr "Opprett en RAID-en_het [forvalg=/dev/md%s]." #~ msgid "Clone a _drive to create a RAID device [default=/dev/md%s]." #~ msgstr "Klone en _disk for å opprette en RAID-enhet [forvalg=/dev/md%s]." #~ msgid "Ne_w" #~ msgstr "N_y" #~ msgid "R_AID" #~ msgstr "R_AID" #~ msgid "_LVM" #~ msgstr "_LVM" #~ msgid "Hide RAID device/LVM Volume _Group members" #~ msgstr "Skjul RAID-enhet/_gruppemedlemmer for LVM-volumgruppe" #~ msgid "" #~ "Clone Drive Tool\n" #~ "\n" #~ "This tool allows you to significantly reduce the amount of effort " #~ "required to setup RAID arrays. This tool uses a source drive which has " #~ "been prepared with the desired partitioning layout, and clones this " #~ "layout onto other similar sized drives. Then a RAID device can be " #~ "created.\n" #~ "\n" #~ "NOTE: The source drive must have partitions which are restricted to be on " #~ "that drive only, and can only contain unused software RAID partitions. " #~ "Other partition types are not allowed.\n" #~ "\n" #~ "EVERYTHING on the target drive(s) will be destroyed by this process." #~ msgstr "" #~ "Verktøy for kloning av stasjoner\n" #~ "\n" #~ "Dette verktøyet lar deg redusere mengden arbeid som kreves for å sette " #~ "opp RAID-enheter drastisk. Ideen er at man tar en kildestasjon som er " #~ "forberedt med ønsket partisjoner, og kloner denne til stasjoner med samme " #~ "utseende. Etter dette kan en RAID-enhet opprettes.\n" #~ "\n" #~ "MERK: Kildestasjonen må ha partisjoner som er begrenset til å være kun på " #~ "denne stasjonen, og kan kun inneholde ubrukte programvare-RAID-" #~ "partisjoner. Andre partisjonstyper er ikke tillatt.\n" #~ "\n" #~ "ALLE DATA på målstasjonen(e) vil bli ødelagt i denne prosessen." #, fuzzy #~ msgid "" #~ "The following error occurred while setting up the installation " #~ "repository:\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Please provide the correct information for installing %s" #~ msgstr "" #~ "Følgende feil oppstod under partisjonering:\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Trykk «OK» for å avslutte installasjonsprogrammet." #~ msgid "Unknown Host" #~ msgstr "Ukjent vert" #~ msgid "%s is not a valid hostname." #~ msgstr "%s er ikke et gyldig vertsnavn." #~ msgid "_Ignore drive" #~ msgstr "_Overse stasjon" #~ msgid "_Re-initialize drive" #~ msgstr "_Re-initialiser enheten" #, fuzzy #~ msgid "NIC device name" #~ msgstr "Ingen drivere funnet" #~ msgid "%s is not a valid NIC device name." #~ msgstr "%s er ikke et gyldig enhetsnavn for NIC." #~ msgid "" #~ "This release of %s supports the an updated file system, which has several " #~ "benefits over the file system traditionally shipped in %s. This " #~ "installation program can migrate formatted partitions without data loss.\n" #~ "\n" #~ "Which of these partitions would you like to migrate?" #~ msgstr "" #~ "Denne utgaven av %s støtter et oppdatert filsystem som har flere fordeler " #~ "over filsystemet som tradisjonelt har vært brukt i %s. Det er mulig å " #~ "migrere partisjoner uten tap av data.\n" #~ "\n" #~ "Hvilke av disse partisjonene vil du migrere?" #~ msgid "Add _FCoE SAN" #~ msgstr "Legg til _FCoE SAN" #~ msgid "Add _ZFCP LUN" #~ msgstr "Legg til _ZFCP-LUN" #~ msgid "Add _iSCSI target" #~ msgstr "Legg til _iSCSI-mål" #~ msgid "Disable _dmraid device" #~ msgstr "Deaktiver _dmraid-tjeneste" #, fuzzy #~ msgid "" #~ "Installation requires partitioning of your hard drive. The default " #~ "layout is suitable for most users. Select what space to use and which " #~ "drives to use as the install target. You can also choose to create your " #~ "own custom layout." #~ msgstr "" #~ "Installasjonen krever partisjonering av harddisken. Forvalgt utforming av " #~ "partisjoner er ok for de fleste brukere. Du kan velge å bruke denne eller " #~ "lage din egen." #~ msgid "Re_view and modify partitioning layout" #~ msgstr "Se o_ver og endre utforming av partisjoner" #~ msgid "What drive would you like to _boot this installation from?" #~ msgstr "Hvilken enhet _vil du starte opp denne installasjonen fra?" #~ msgid "_Advanced storage configuration" #~ msgstr "_Avansert konfigurasjon av lagring" #~ msgid "_Select the drive(s) to use for this installation." #~ msgstr "_Velg stasjonen(e) vil du bruke for denne installasjonen." #~ msgid "%(instkey)s:" #~ msgstr "%(instkey)s:" #~ msgid "Please enter your %(instkey)s." #~ msgstr "Vennligst oppgi dine %(instkey)s" #~ msgid "Gateway:" #~ msgstr "Gateway:" #~ msgid "IPv4 Address:" #~ msgstr "IPv4-adresse:" #~ msgid "IPv6 Address:" #~ msgstr "IPv6-adresse:" #~ msgid "Nameserver:" #~ msgstr "Navnetjener:" #~ msgid "_Interface:" #~ msgstr "Grensesn_itt:" #~ msgid "Enable IPv_4 support" #~ msgstr "Aktiver støtte for IPv_4" #~ msgid "Enable IPv_6 support" #~ msgstr "Aktiver støtte for IPv_6" #~ msgid "Use _dynamic IP configuration (DHCP)" #~ msgstr "Bruk _dynamisk konfigurasjon av IP (DHCP)" #~ msgid "Customize _later" #~ msgstr "Tilpass _senere" #~ msgid "" #~ "The default installation of %s includes a set of software applicable for " #~ "general internet usage. What additional tasks would you like your system " #~ "to support?" #~ msgstr "" #~ "Standard installasjon av %s inneholder et sett programmer som er " #~ "tilpasset vanlig bruk av internett. Hvilke tilleggsoppgaver ønsker du at " #~ "systemet skal inneholde støtte for?" #~ msgid "" #~ "You can further customize the software selection now, or after install " #~ "via the software management application." #~ msgstr "" #~ "Videre tilpassing av programvareutvalget kan ferdigstilles nå, eller " #~ "etter installasjonen via program for pakkehåndtering." #~ msgid "_Customize now" #~ msgstr "Tilpass _nå" #~ msgid "" #~ "The following error was found while parsing thekickstart configuration " #~ "file:\n" #~ "\n" #~ "%s" #~ msgstr "" #~ "Følgende feil ble funnet under lesing av din kickstart-konfigurasjon:\n" #~ "\n" #~ "%s" #, fuzzy #~ msgid "label1" #~ msgstr "Etikett"