path: root/eclass/gnatbuild-r1.eclass

# Copyright 1999-2018 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2

# @DEAD
# Removal on 2018-05-18.

# Author: George Shapovalov <george@gentoo.org>
# Author: Steve Arnold <nerdboy@gentoo.org>
# No maintainer <maintainer-needed@gentoo.org>
#
# Notes:
#  HOMEPAGE and LICENSE are set in appropriate ebuild, as
#  gnat is developed by FSF and AdaCore "in parallel"
#
# The following vars can be set in ebuild before inheriting this eclass. They
# will be respected:
#  SLOT
#  BOOT_SLOT - where old bootstrap is used as it works fine for 4.4 - 4.6

#WANT_AUTOMAKE="1.8"
#WANT_AUTOCONF="2.1"

inherit eutils fixheadtails flag-o-matic gnuconfig libtool multilib pax-utils toolchain-funcs versionator

FEATURES=${FEATURES/multilib-strict/}

EXPORTED_FUNCTIONS="pkg_setup pkg_postinst pkg_postrm src_unpack src_configure src_compile src_install"

EXPORT_FUNCTIONS ${EXPORTED_FUNCTIONS}

IUSE="nls openmp hardened multilib"
# multilib is supported via profiles now, multilib usevar is deprecated

RDEPEND="virtual/libiconv
	nls? ( virtual/libintl )"

DEPEND="${RDEPEND}
	>=app-eselect/eselect-gnat-1.5
	>=sys-libs/glibc-2.12
	>=sys-devel/binutils-2.23
	sys-devel/bc
	>=sys-devel/bison-1.875
	>=sys-devel/flex-2.5.4
	nls? ( sys-devel/gettext )"

# Note!
# It may not be safe to source this at top level. Only source inside local
# functions!
GnatCommon="/usr/share/gnat/lib/gnat-common.bash"

#---->> globals and SLOT <<----

# just a check, this location seems to vary too much, easier to track it in
# ebuild
#[ -z "${GNATSOURCE}" ] && die "please set GNATSOURCE in ebuild! (before inherit)"

# versioning
# because of gnatpro/gnatgpl we need to track both gcc and gnat versions

# these simply default to $PV
GNATMAJOR=$(get_version_component_range 1)
GNATMINOR=$(get_version_component_range 2)
GNATBRANCH=$(get_version_component_range 1-2)
GNATRELEASE=$(get_version_component_range 1-3)
# this one is for the gnat-gpl which is versioned by gcc backend and ACT version
# number added on top
ACT_Ver=$(get_version_component_range 4)

# GCCVER and SLOT logic
#
# I better define vars for package names, as there was discussion on proper
# naming and it may change
PN_GnatGCC="gnat-gcc"
PN_GnatGpl="gnat-gpl"

# ATTN! GCCVER stands for the provided backend gcc, not the one on the system
# so tc-* functions are of no use here. The present versioning scheme makes
# GCCVER basically a part of PV, but *this may change*!!
#
# GCCVER can be set in the ebuild.
[[ -z ${GCCVER} ]] && GCCVER="${GNATRELEASE}"


# finally extract GCC version strings
GCCMAJOR=$(get_version_component_range 1 "${GCCVER}")
GCCMINOR=$(get_version_component_range 2 "${GCCVER}")
GCCBRANCH=$(get_version_component_range 1-2 "${GCCVER}")
GCCRELEASE=$(get_version_component_range 1-3 "${GCCVER}")

# SLOT logic, make it represent gcc backend, as this is what matters most
# There are some special cases, so we allow it to be defined in the ebuild
# ATTN!! If you set SLOT in the ebuild, don't forget to make sure that
# BOOT_SLOT is also set properly!
[[ -z ${SLOT} ]] && SLOT="${GCCBRANCH}"

# possible future crosscompilation support
export CTARGET=${CTARGET:-${CHOST}}

is_crosscompile() {
	[[ ${CHOST} != ${CTARGET} ]]
}

# Bootstrap CTARGET and SLOT logic. For now BOOT_TARGET=CHOST is "guaranteed" by
# profiles, so mostly watch out for the right SLOT used in the bootstrap.
# As above, with SLOT, it may need to be defined in the ebuild
BOOT_TARGET=${CTARGET}
[[ -z ${BOOT_SLOT} ]] && BOOT_SLOT=${SLOT}

# for newer bootstrap starting with 4.9 (still experimental)
BOOT_VER=${GCCRELEASE}

# set our install locations
PREFIX=${GNATBUILD_PREFIX:-/usr} # not sure we need this hook, but may be..
LIBPATH=${PREFIX}/$(get_libdir)/${PN}/${CTARGET}/${SLOT}
LIBEXECPATH=${PREFIX}/libexec/${PN}/${CTARGET}/${SLOT}
INCLUDEPATH=${LIBPATH}/include
BINPATH=${PREFIX}/${CTARGET}/${PN}-bin/${SLOT}
DATAPATH=${PREFIX}/share/${PN}-data/${CTARGET}/${SLOT}
# ATTN! the one below should match the path defined in eselect-gnat module
CONFIG_PATH="/usr/share/gnat/eselect"
gnat_profile="${CTARGET}-${PN}-${SLOT}"
gnat_config_file="${CONFIG_PATH}/${gnat_profile}"

# ebuild globals
if [[ ${PN} == "${PN_GnatPro}" ]] && [[ ${GNATMAJOR} == "3" ]]; then
		DEPEND="x86? ( >=app-shells/tcsh-6.0 )"
fi
S="${WORKDIR}/gcc-${GCCVER}"

# bootstrap globals, common to src_unpack and src_compile
GNATBOOT="${WORKDIR}/usr"
GNATBUILD="${WORKDIR}/build"
#GNATBUILD="${BUILD_DIR}"

# necessary for detecting lib locations and creating env.d entry
#XGCC="${GNATBUILD}/gcc/xgcc -B${GNATBUILD}/gcc"

#----<< globals and SLOT >>----

# set SRC_URI's in ebuilds for now

#----<< global toolchain vars >>----

: ${TARGET_ABI:=${ABI}}
: ${TARGET_MULTILIB_ABIS:=${MULTILIB_ABIS}}
: ${TARGET_DEFAULT_ABI:=${DEFAULT_ABI}}


#---->> specs + env.d logic <<----
# TODO!!!
# set MANPATH, etc..
#----<< specs + env.d logic >>----


#---->> some helper functions <<----
tc_version_is_at_least() {
	version_is_at_least "$1" "${2:-${GCCBRANCH}}"
}

guess_patch_type_in_dir() {
	[[ -n $(ls "$1"/*.bz2 2>/dev/null) ]] \
		&& EPATCH_SUFFIX="patch.bz2" \
		|| EPATCH_SUFFIX="patch"
}

# configure to build with the hardened GCC specs as the default
make_gcc_hard() {
	# we want to be able to control the pie patch logic via something other
	# than ALL_CFLAGS...
	sed -e '/^ALL_CFLAGS/iHARD_CFLAGS = ' \
		-e 's|^ALL_CFLAGS = |ALL_CFLAGS = $(HARD_CFLAGS) |' \
		-i "${S}"/gcc/Makefile.in
	# Need to add HARD_CFLAGS to ALL_CXXFLAGS on >= 4.7
	if tc_version_is_at_least 4.7 ; then
		sed -e '/^ALL_CXXFLAGS/iHARD_CFLAGS = ' \
                        -e 's|^ALL_CXXFLAGS = |ALL_CXXFLAGS = $(HARD_CFLAGS) |' \
                        -i "${S}"/gcc/Makefile.in
	fi

	# defaults to enable for new gnatbuild
	if use hardened ; then
		gcc_hard_flags=" -DEFAULT_PIE_SSP"
	else
		gcc_hard_flags+=" -DEFAULT_SSP"
	fi

	sed -i \
		-e "/^HARD_CFLAGS = /s|=|= ${gcc_hard_flags} |" \
		"${S}"/gcc/Makefile.in || die

}

gcc-multilib-configure() {
	if ! is_multilib ; then
		confgcc="${confgcc} --disable-multilib"
		# Fun times: if we are building for a target that has multiple
		# possible ABI formats, and the user has told us to pick one
		# that isn't the default, then not specifying it via the list
		# below will break that on us.
	else
		confgcc="${confgcc} --enable-multilib"
	fi

	# translate our notion of multilibs into gcc's
	local abi list
	for abi in $(get_all_abis TARGET) ; do
		local l=$(gcc-abi-map ${abi})
		[[ -n ${l} ]] && list+=",${l}"
	done
	if [[ -n ${list} ]] ; then
		case ${CTARGET} in
		x86_64*)
			tc_version_is_at_least 4.8 && confgcc="${confgcc} --with-multilib-list=${list:1}"
			;;
		esac
	fi
}

gcc-abi-map() {
	# Convert the ABI name we use in Gentoo to what gcc uses
	local map=()
	case ${CTARGET} in
		mips*)   map=("o32 32" "n32 n32" "n64 64") ;;
		x86_64*) map=("amd64 m64" "x86 m32" "x32 mx32") ;;
	esac

	local m
	for m in "${map[@]}" ; do
		l=( ${m} )
	[[ $1 == ${l[0]} ]] && echo ${l[1]} && break
	done
}

is_multilib() {
	tc_version_is_at_least 3 || return 1
	use multilib
}

## note: replaced with minspecs (sort of)
#create_specs_file() {
#	einfo "Creating a vanilla gcc specs file"
#	"${WORKDIR}"/build/gcc/xgcc -dumpspecs > "${WORKDIR}"/build/vanilla.specs
#}

# eselect stuff taken straight from toolchain.eclass and greatly simplified
add_profile_eselect_conf() {
	local gnat_config_file=$1
	local abi=$2
	local var

	echo >> "${D}/${gnat_config_file}"
	if ! is_multilib ; then
		echo "  ctarget=${CTARGET}" >> "${D}/${gnat_config_file}"
	else
		echo "[${abi}]" >> "${D}/${gnat_config_file}"
		var="CTARGET_${abi}"
		if [[ -n ${!var} ]] ; then
			echo "  ctarget=${!var}" >> "${D}/${gnat_config_file}"
		else
			var="CHOST_${abi}"
			if [[ -n ${!var} ]] ; then
				echo "  ctarget=${!var}" >> "${D}/${gnat_config_file}"
			else
				echo "  ctarget=${CTARGET}" >> "${D}/${gnat_config_file}"
			fi
		fi
	fi

	var="CFLAGS_${abi}"
	if [[ -n ${!var} ]] ; then
		echo "  cflags=${!var}" >> "${D}/${gnat_config_file}"
	fi
}

create_eselect_conf() {
	local abi

	dodir ${CONFIG_PATH}

	echo "[global]" > "${D}/${gnat_config_file}"
	echo "  version=${CTARGET}-${SLOT}" >> "${D}/${gnat_config_file}"
	echo "  binpath=${BINPATH}" >> "${D}/${gnat_config_file}"
	echo "  libexecpath=${LIBEXECPATH}" >> "${D}/${gnat_config_file}"
	echo "  ldpath=${LIBPATH}" >> "${D}/${gnat_config_file}"
	echo "  manpath=${DATAPATH}/man" >> "${D}/${gnat_config_file}"
	echo "  infopath=${DATAPATH}/info" >> "${D}/${gnat_config_file}"
	echo "  bin_prefix=${CTARGET}" >> "${D}/${gnat_config_file}"

	for abi in $(get_all_abis) ; do
		add_profile_eselect_conf "${gnat_config_file}" "${abi}"
	done
}

should_we_eselect_gnat() {
	# we only want to switch compilers if installing to / or /tmp/stage1root
	[[ ${ROOT} == "/" ]] || return 1

	# if the current config is invalid, we definitely want a new one
	# Note: due to bash quirkiness, the following must not be 1 line
	local curr_config
	curr_config=$(eselect --colour=no gnat show | grep ${CTARGET} | awk '{ print $1 }') || return 0
	[[ -z ${curr_config} ]] && return 0

	# The logic is basically "try to keep the same profile if possible"

	if [[ ${curr_config} == ${CTARGET}-${PN}-${SLOT} ]] ; then
		return 0
	else
		elog "The current gcc config appears valid, so it will not be"
		elog "automatically switched for you.  If you would like to"
		elog "switch to the newly installed gcc version, do the"
		elog "following:"
		echo
		elog "eselect gnat set <profile>"
		echo
		ebeep
		return 1
	fi
}

# active compiler selection, called from pkg_postinst
do_gnat_config() {
	eselect gnat set ${CTARGET}-${PN}-${SLOT} &> /dev/null

	elog "The following gnat profile has been activated:"
	elog "${CTARGET}-${PN}-${SLOT}"
	elog ""
	elog "The compiler has been installed as gnatgcc, and the coverage testing"
	elog "tool as gnatgcov."
	elog ""
	elog "Ada handling in Gentoo allows you to have multiple gnat variants"
	elog "installed in parallel and automatically manage Ada libs."
	elog "Please take a look at the Ada project page for some documentation:"
	elog "http://www.gentoo.org/proj/en/prog_lang/ada/index.xml"
}


# Taken straight from the toolchain.eclass. Only removed the "obsolete hunk"
#
# The purpose of this DISGUSTING gcc multilib hack is to allow 64bit libs
# to live in lib instead of lib64 where they belong, with 32bit libraries
# in lib32. This hack has been around since the beginning of the amd64 port,
# and we're only now starting to fix everything that's broken. Eventually
# this should go away.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
disgusting_gcc_multilib_HACK() {
	local config
	local libdirs
	if has_multilib_profile ; then
		case $(tc-arch) in
			amd64)
				config="i386/t-linux64"
				libdirs="../$(get_abi_LIBDIR amd64) ../$(get_abi_LIBDIR x86)" \
			;;
			ppc64)
				config="rs6000/t-linux64"
				libdirs="../$(get_abi_LIBDIR ppc64) ../$(get_abi_LIBDIR ppc)" \
			;;
		esac
	else
		die "Your profile is no longer supported by portage."
	fi

	einfo "updating multilib directories to be: ${libdirs}"
	sed -i -e "s:^MULTILIB_OSDIRNAMES.*:MULTILIB_OSDIRNAMES = ${libdirs}:" "${S}"/gcc/config/${config}
}


#---->> pkg_* <<----
gnatbuild-r1_pkg_setup() {
	debug-print-function ${FUNCNAME} $@

	# Setup variables which would normally be in the profile
	if is_crosscompile ; then
		multilib_env ${CTARGET}
	fi

	# we dont want to use the installed compiler's specs to build gnat!
	unset GCC_SPECS
	unset LANGUAGES #265283
}

gnatbuild-r1_pkg_postinst() {
	if should_we_eselect_gnat; then
		do_gnat_config
	else
		eselect gnat update
	fi

	# if primary compiler list is empty, add this profile to the list, so
	# that users are not left without active compilers (making sure that
	# libs are getting built for at least one)
	elog
	. ${GnatCommon} || die "failed to source common code"
	if [[ ! -f ${PRIMELIST} ]] || [[ ! -s ${PRIMELIST} ]]; then
		echo "${gnat_profile}" > ${PRIMELIST}
		elog "The list of primary compilers was empty and got assigned ${gnat_profile}."
	fi
	elog "Please edit ${PRIMELIST} and list there gnat profiles intended"
	elog "for common use."
}


gnatbuild-r1_pkg_postrm() {
	# "eselect gnat update" now removes the env.d file if the corresponding
	# gnat profile was unmerged
	eselect gnat update
	elog "If you just unmerged the last gnat in this SLOT, your active gnat"
	elog "profile got unset. Please check what eselect gnat show tells you"
	elog "and set the desired profile"
}
#---->> pkg_* <<----

#---->> src_* <<----

# common unpack stuff
gnatbuild-r1_src_unpack() {
	debug-print-function ${FUNCNAME} $@

	[ -z "$1" ] &&  gnatbuild-r1_src_unpack all

	while [ "$1" ]; do
	case $1 in
		base_unpack)
			unpack ${A}
			pax-mark E $(find ${GNATBOOT} -name gnat1)

			cd "${S}"
			# patching gcc sources, following the toolchain
			# first, the common patches
			guess_patch_type_in_dir "${WORKDIR}"/patch
			EPATCH_MULTI_MSG="Applying common Gentoo patches ..." \
				epatch "${WORKDIR}"/patch
			guess_patch_type_in_dir "${WORKDIR}"/piepatch
			EPATCH_MULTI_MSG="Applying Gentoo PIE patches ..." \
				epatch "${WORKDIR}"/piepatch

			if [[ -d "${FILESDIR}"/patches ]] && [[ ! -z $(ls "${FILESDIR}"/patches/*.patch 2>/dev/null) ]] ; then
				EPATCH_MULTI_MSG="Applying local Gentoo patches ..." \
				epatch "${FILESDIR}"/patches/*.patch
			fi
			#
			# then per SLOT
			if [[ -d "${FILESDIR}"/patches/${SLOT} ]] && [[ ! -z $(ls "${FILESDIR}"/patches/${SLOT}/*.patch 2>/dev/null) ]] ; then
				EPATCH_MULTI_MSG="Applying SLOT-specific Gentoo patches ..." \
				epatch "${FILESDIR}"/patches/${SLOT}/*.patch
			fi

			# add hardening as per toolchain eclass
			make_gcc_hard

			# Replacing obsolete head/tail with POSIX compliant ones
			ht_fix_file */configure

#			if ! is_crosscompile && is_multilib && \
#				[[ ( $(tc-arch) == "amd64" || $(tc-arch) == "ppc64" ) && -z ${SKIP_MULTILIB_HACK} ]] ; then
#					disgusting_gcc_multilib_HACK || die "multilib hack failed"
#			fi

			# Fixup libtool to correctly generate .la files with portage
			cd "${S}"
			elibtoolize --portage --shallow --no-uclibc

			gnuconfig_update
			# update configure files
			einfo "Fixing misc issues in configure files"
			for f in $(grep -l 'autoconf version 2.13' $(find "${S}" -name configure)) ; do
				ebegin "  Updating ${f}"
				patch "${f}" "${FILESDIR}"/gcc-configure-LANG.patch >& "${T}"/configure-patch.log \
					|| eerror "Please file a bug about this"
				eend $?
			done

			# apply global slot/path patch
			EPATCH_MULTI_MSG="Adjusting default paths for gnat-gcc ..." \
			epatch "${FILESDIR}"/${PN}-4.9.3-make-default-paths-match-slot.patch
			sed -i -e "s|SLOT_MARKER|${BOOT_SLOT}|" "${S}"/gcc/Makefile.in

			[[ ${CHOST} == ${CTARGET} ]] && epatch "${FILESDIR}"/gcc-spec-env-r1.patch

#			this is only needed for gnat-gpl-4.1 and breaks for gnat-gcc, so
#			this block was moved to corresponding ebuild
#			pushd "${S}"/gnattools &> /dev/null
#				eautoconf
#			popd &> /dev/null
		;;

		common_prep)
			# Prepare the gcc source directory
			cd "${S}/gcc"
			touch cstamp-h.in
			touch ada/[es]info.h
			touch ada/nmake.ad[bs]
			# set the compiler name to gnatgcc
			for i in `find ada/ -name '*.ad[sb]'`; do \
				sed -i -e "s/\"gcc\"/\"gnatgcc\"/g" ${i}; \
			done
			# add -fPIC flag to shared libs for 3.4* backend
			if [ "3.4" == "${GCCBRANCH}" ] ; then
				cd ada
				epatch "${FILESDIR}"/gnat-Make-lang.in.patch
			fi

			# gcc 4.3 sources seem to have a common omission of $(DESTDIR),
			# that leads to make install trying to rm -f file on live system.
			# As we do not need this rm, we simply remove the whole line
			if [ "4.3" == "${GCCBRANCH}" ] ; then
				sed -i -e "/\$(RM) \$(bindir)/d" "${S}"/gcc/ada/Make-lang.in
			fi

			find "${S}" -name Makefile.in \
				-exec sed -i '/^pkgconfigdir/s:=.*:=$(toolexeclibdir)/pkgconfig:' {} +

			mkdir -p "${GNATBUILD}"
		;;

		all)
			gnatbuild-r1_src_unpack base_unpack common_prep
		;;
	esac
	shift
	done
}

# for now just dont run default configure
gnatbuild-r1_src_configure() {
	:
}

# it would be nice to split configure and make steps
# but both need to operate inside specially tuned evironment
# so just do sections for now (as in eclass section of handbook)
# sections are: configure, make-tools, bootstrap,
#  gnatlib_and_tools, gnatlib-shared
gnatbuild-r1_src_compile() {
	debug-print-function ${FUNCNAME} $@

	if [[ -z "$1" ]]; then
		gnatbuild-r1_src_compile all
		return $?
	fi

	if [[ "all" == "$1" ]]
	then # specialcasing "all" to avoid scanning sources unnecessarily
		gnatbuild-r1_src_compile configure make-tools \
			bootstrap gnatlib_and_tools gnatlib-shared

	else
		# Set some paths to our bootstrap compiler.
		export PATH="${GNATBOOT}/bin:${PATH}"
		# !ATTN! the bootstrap compilers have a very simplystic structure,
		# so many paths are not identical to the installed ones.
		# Plus it was simplified even more in new releases.
		if [[ ${BOOT_SLOT} > 4.1 ]] ; then
			case $(tc-arch) in
				arm)
					GNATLIB="${GNATBOOT}/lib/gcc/${BOOT_TARGET}/${BOOT_SLOT}"
					;;
				x86|amd64)
					GNATLIB="${GNATBOOT}/lib/gcc/${BOOT_TARGET}/${BOOT_VER}"
					;;
				*)
					GNATLIB="${GNATBOOT}/lib"
					;;
			esac
		else
			GNATLIB="${GNATBOOT}/lib/gnatgcc/${BOOT_TARGET}/${BOOT_SLOT}"
		fi

		export CC="${GNATBOOT}/bin/gnatgcc"
		export CXX="${GNATBOOT}/bin/gnatg++"
		export LDFLAGS="${LDFLAGS}"
		export CFLAGS="${CFLAGS}"
		export CXXFLAGS="${CFLAGS}"
		# CPATH is supposed to be applied for any language, thus
		# superceding either of C/CPLUS/OBJC_INCLUDE_PATHs
		export CPATH="${GNATLIB}/include"
		LIB_DIR="${GNATLIB}"
		LDFLAGS="${LDFLAGS} -L${GNATLIB}"

		# additional vars from gnuada and elsewhere
		export LIBRARY_PATH="${GNATLIB}"

		STDCXX_INCDIR="${LIBPATH}/include/g++-v${SLOT/\.*/}"

		export ADA_OBJECTS_PATH="${GNATLIB}/adalib"
		export ADA_INCLUDE_PATH="${GNATLIB}/adainclude"

		while [ "$1" ]; do
		case $1 in
			configure)
				debug-print-section configure

				# Configure gcc
				local confgcc
				confgcc="${confgcc} --host=${CHOST}"

				# some cross-compile logic from toolchain
				if is_crosscompile || tc-is-cross-compiler ; then
					confgcc="${confgcc} --target=${CTARGET}"
				fi
				[[ -n ${CBUILD} ]] && confgcc="${confgcc} --build=${CBUILD}"

				# Native Language Support
				if use nls ; then
					confgcc="${confgcc} --enable-nls --without-included-gettext"
				else
					confgcc="${confgcc} --disable-nls"
				fi

				# bug 586538: extra lto-wrapper dorks up system gcc
				confgcc="${confgcc} --disable-lto"

				# setup multilib abi stuff
				gcc-multilib-configure

				use hardened && confgcc="${confgcc} --enable-esp"

				# reasonably sane globals (from toolchain)
				# also disable mudflap and ssp
				confgcc="${confgcc} \
					--enable-languages="c,ada,c++" \
					--with-gcc \
					--with-system-zlib \
					--enable-obsolete \
					--enable-secureplt \
					--disable-werror \
					--enable-checking=release \
					--enable-libstdcxx-time \
					--disable-libmudflap \
					--disable-libssp \
					--disable-altivec \
					--disable-fixed-point \
					--disable-libgcj \
					--disable-libcilkrts \
					--disable-libquadmath \
					--enable-libsanitizer \
					--enable-targets=all \
					--with-bugurl=https://bugs.gentoo.org/ \
					--with-python-dir=${DATAPATH/$PREFIX/}/python"

				if in_iuse openmp ; then
					# Make sure target has pthreads support. #326757 #335883
					# There shouldn't be a chicken&egg problem here as openmp won't
					# build without a C library, and you can't build that w/out
					# already having a compiler ...
					if ! is_crosscompile || \
						$(tc-getCPP ${CTARGET}) -E - <<<"#include <pthread.h>" >& /dev/null
					then
						case $(tc-arch) in
							arm)
								confgcc="${confgcc} --disable-libgomp"
								;;
							*)
								if use openmp ; then
									confgcc="${confgcc} --enable-libgomp"
								else
									confgcc="${confgcc} --disable-libgomp"
								fi
								;;
						esac
					else
						# Force disable as the configure script can be dumb #359855
						confgcc="${confgcc} --disable-libgomp"
					fi
				else
					# For gcc variants where we don't want openmp (e.g. kgcc)
					confgcc="${confgcc} --disable-libgomp"
				fi

				# ACT's gnat-gpl does not like libada for whatever reason..
				if tc_version_is_at_least 4.2 ; then
					confgcc="${confgcc} --enable-libada"
#				else
#					einfo "ACT's gnat-gpl does not like libada, disabling"
#					confgcc="${confgcc} --disable-libada"
				fi

				# set some specifics available in later versions
				confgcc="${confgcc} --enable-shared"
				if tc_version_is_at_least 4.7 ; then
					einfo "setting gnat thread model"
					confgcc="${confgcc} --enable-threads=posix"
					confgcc="${confgcc} --enable-shared=boehm-gc,ada,libada"
				elif tc_version_is_at_least 4.3 ; then
					confgcc="${confgcc} --enable-threads=gnat"
					confgcc="${confgcc} --enable-shared=boehm-gc,ada,libada"
				else
					confgcc="${confgcc} --enable-threads=posix"
				fi

				# harfloat vs soft
				case $(tc-is-softfloat) in
				yes)    confgcc="${confgcc} --with-float=soft" ;;
				softfp) confgcc="${confgcc} --with-float=softfp" ;;
				*)
					# If they've explicitly opt-ed in, do hardfloat,
					# otherwise let the gcc default kick in.
					case ${CTARGET//_/-} in
					*-hardfloat-*|*eabihf) confgcc="${confgcc} --with-float=hard" ;;
					esac
				esac

				# multilib and arch support
				case $(tc-arch) in
				arm)
					local a arm_arch=${CTARGET%%-*}
					# Remove trailing endian variations first: eb el be bl b l
					for a in e{b,l} {b,l}e b l ; do
						if [[ ${arm_arch} == *${a} ]] ; then
							arm_arch=${arm_arch%${a}}
							break
						fi
					done
					# Convert armv7{a,r,m} to armv7-{a,r,m}
					[[ ${arm_arch} == armv7? ]] && arm_arch=${arm_arch/7/7-}
					# See if this is a valid --with-arch flag
					if (srcdir=${S}/gcc target=${CTARGET} with_arch=${arm_arch};
					    . "${srcdir}"/config.gcc) &>/dev/null
					then
						confgcc="${confgcc} --with-arch=${arm_arch}"
					fi

					# Make default mode thumb for microcontroller classes #418209
					[[ ${arm_arch} == *-m ]] && confgcc="${confgcc} --with-mode=thumb"

					# Enable hardvfp
					if [[ $(tc-is-softfloat) == "no" ]] && \
					   [[ ${CTARGET} == armv[67]* ]]
					then
						# Follow the new arm hardfp distro standard by default
						confgcc="${confgcc} --with-float=hard"
						case ${CTARGET} in
						armv6*) confgcc="${confgcc} --with-fpu=vfp" ;;
						armv7*) confgcc="${confgcc} --with-fpu=vfpv3-d16" ;;
						esac
					fi
					;;
				mips)
					# Add --with-abi flags to set default ABI
					confgcc="${confgcc} --with-abi=$(gcc-abi-map ${TARGET_DEFAULT_ABI})"
					;;
				ppc)
					# Set up defaults based on current CFLAGS
					is-flagq -mfloat-gprs=double && confgcc="${confgcc} --enable-e500-double"
					[[ ${CTARGET//_/-} == *-e500v2-* ]] && confgcc="${confgcc} --enable-e500-double"
					;;
				amd64)
					if is_multilib ; then
						confgcc="${confgcc} --enable-multilib"
						if has x32 $(get_all_abis TARGET) ; then
							confgcc="${confgcc} --with-abi=$(gcc-abi-map ${TARGET_DEFAULT_ABI})"
						fi
					else
						confgcc="${confgcc} --disable-multilib"
					fi
					;;
				x86)
					confgcc="${confgcc} --with-arch=${CTARGET%%-*}"
					confgcc="${confgcc} --disable-multilib"
					;;
				esac

				# __cxa_atexit is "essential for fully standards-compliant handling of
				# destructors", but apparently requires glibc.
				if [[ ${CTARGET} == *-gnu* ]] ; then
					confgcc="${confgcc} --enable-__cxa_atexit"
					confgcc="${confgcc} --enable-clocale=gnu"
				fi

				export gcc_cv_lto_plugin=1  # okay to build, default to opt-in
				export gcc_cv_prog_makeinfo_modern=no
				export ac_cv_have_x='have_x=yes ac_x_includes= ac_x_libraries='
				use hardened && export gcc_cv_libc_provides_ssp=yes

				# need to strip graphite/lto flags or we'll get the
				# dreaded C compiler cannot create executables...
				# error.
#				filter-flags -floop-interchange -floop-strip-mine -floop-block
#				filter-flags -fuse-linker-plugin -flto*
				strip-flags
				replace-flags -O? -O2
				filter-flags '-mabi*' -m31 -m32 -m64
				filter-flags -frecord-gcc-switches
				filter-flags -mno-rtm -mno-htm

				# gold linker barfs on some arches/configs :/
				#tc-ld-is-gold && tc-ld-disable-gold

				case $(tc-arch) in
					amd64|x86)
						filter-flags '-mcpu=*'
						;;
					*)
						;;
				esac

#				strip-unsupported-flags

				STAGE1_CFLAGS="${CFLAGS} -fPIC"
				use hardened && STAGE1_CFLAGS="-O2 -fPIC"
				BOOT_CFLAGS="$(get_abi_CFLAGS ${TARGET_DEFAULT_ABI}) ${CFLAGS} -fPIC"
				is_crosscompile && BOOT_CFLAGS="-O2 -fPIC"

				einfo "Environment vars:
	CC=${CC},
	CXX=${CXX},
	CTARGET=${CTARGET}
	ABI=${TARGET_DEFAULT_ABI},
	TARGET_ABI=${TARGET_ABI}.
	TARGET_MULTILIB_ABIS=${TARGET_MULTILIB_ABIS},
	TARGET_DEFAULT_ABI=${TARGET_DEFAULT_ABI},
	GCC_ABI=$(gcc-abi-map ${TARGET_DEFAULT_ABI})
	ADA_OBJECTS_PATH=${ADA_OBJECTS_PATH},
	ADA_INCLUDE_PATH=${ADA_INCLUDE_PATH},
	PATH=${PATH}"

				confgcc="${confgcc} ${EXTRA_ECONF}"
				einfo "Configuring with confgcc=${confgcc}"

				pushd "${GNATBUILD}" > /dev/null
				CC="${CC}" CXX="${CXX}" \
					LDFLAGS="${LDFLAGS}" \
					CFLAGS="${CFLAGS}" \
					CXXFLAGS="${CFLAGS}" \
					"${S}"/configure \
					--prefix="${PREFIX}" \
					--bindir="${BINPATH}" \
					--includedir="${INCLUDEPATH}" \
					--datadir="${DATAPATH}" \
					--mandir="${DATAPATH}"/man \
					--infodir="${DATAPATH}"/info \
					--with-gxx-include-dir="${STDCXX_INCDIR}" \
					--with-pkgversion="Gentoo Hardened ${GNATRELEASE} p${PATCH_VER}, pie-${PIE_VER}" \
					${confgcc} || die "configure failed"
				popd > /dev/null
			;;

			make-tools)
				debug-print-section make-tools
				# Compile helper tools
				cd "${GNATBOOT}"
				cp "${S}"/gcc/ada/xtreeprs.adb .
				cp "${S}"/gcc/ada/xsinfo.adb   .
				cp "${S}"/gcc/ada/xeinfo.adb   .
				cp "${S}"/gcc/ada/xnmake.adb   .
				cp "${S}"/gcc/ada/xutil.ad{s,b}   .
				if (( ${GNATMINOR} > 5 )) ; then
					cp "${S}"/gcc/ada/einfo.ad{s,b}  .
					cp "${S}"/gcc/ada/csinfo.adb  .
					cp "${S}"/gcc/ada/ceinfo.adb  .
				fi

				gnatmake xtreeprs  && \
				gnatmake xsinfo  && \
				gnatmake xeinfo  && \
				gnatmake xnmake || die "building helper tools"

				mv xeinfo xnmake xsinfo xtreeprs bin/
			;;

			bootstrap)
				debug-print-section bootstrap
				# and, finally, the build itself
				# do we need this?  STAGE1_CFLAGS="${CFLAGS}"
				# or this?  bootstrap-lean
				# removing both to try --disable-bootstrap
				pushd "${GNATBUILD}" >/dev/null

				emake \
					LDFLAGS="${LDFLAGS}" \
					LIBPATH="${LIBPATH}" \
					CC="${CC}" CXX="${CXX}" \
					STAGE1_CFLAGS="${STAGE1_CFLAGS}" \
					LIBRARY_VERSION="${SLOT}" \
					BOOT_CFLAGS="${BOOT_CFLAGS}" \
					bootstrap-lean \
					|| die "bootstrap failed"

				popd >/dev/null
			;;

			gnatlib_and_tools)
				debug-print-section gnatlib_and_tools
				einfo "building gnatlib_and_tools"
				cd "${GNATBUILD}"
				emake -j1 -C gcc gnatlib_and_tools || \
					die "gnatlib_and_tools failed"
			;;

			gnatlib-shared)
				debug-print-section gnatlib-shared
				einfo "building shared lib"
				cd "${GNATBUILD}"
				rm -f gcc/ada/rts/*.{o,ali} || die
				#otherwise make tries to reuse already compiled (without -fPIC) objs..
				emake -j1 -C gcc gnatlib-shared LIBRARY_VERSION="${SLOT}" || \
					die "gnatlib-shared failed"
			;;

		esac
		shift
		done # while
	fi   # "all" == "$1"
}
# -- end gnatbuild-r1_src_compile


gnatbuild-r1_src_install() {
	debug-print-function ${FUNCNAME} $@

	if [[ -z "$1" ]] ; then
		gnatbuild-r1_src_install all
		return $?
	fi

	while [ "$1" ]; do
	case $1 in
	install) # runs provided make install
		debug-print-section install

		# Looks like we need an access to the bootstrap compiler here too
		# as gnat apparently wants to compile something during the installation
		# The spotted obuser was xgnatugn, used to process gnat_ugn_urw.texi,
		# during preparison of the docs.
		export PATH="${GNATBOOT}/bin:${PATH}"
		if [[ ${BOOT_SLOT} > 4.1 ]] ; then
			GNATLIB="${GNATBOOT}/lib"
		elif [[ ${BOOT_SLOT} > 4.8 ]] ; then
			GNATLIB="${GNATBOOT}/lib/gnatgcc/${BOOT_TARGET}/${BOOT_VER}"
		else
			GNATLIB="${GNATBOOT}/lib/gnatgcc/${BOOT_TARGET}/${BOOT_SLOT}"
		fi

		export CC="${GNATBOOT}/bin/gnatgcc"
		#export INCLUDE_DIR="${GNATLIB}/include"
		#export C_INCLUDE_PATH="${GNATLIB}/include"
		#export CPLUS_INCLUDE_PATH="${GNATLIB}/include"
		export ADA_OBJECTS_PATH="${GNATLIB}/adalib"
		export ADA_INCLUDE_PATH="${GNATLIB}/adainclude"

		# Do not allow symlinks in /usr/lib/gcc/${CHOST}/${MY_PV}/include as
		# this can break the build.
		find "${GNATBUILD}"/\*gcc/include/ -type l -delete

		# Remove generated headers, as they can cause things to break
		# (ncurses, openssl, etc). (from toolchain.eclass)
		for x in $(find "${WORKDIR}"/build/gcc/include/ -name '*.h') ; do
			grep -q 'It has been auto-edited by fixincludes from' "${x}" \
				&& rm -f "${x}"
		done


		cd "${GNATBUILD}"
		make -j1 DESTDIR="${D}" install || die

		find "${D}" -name install-tools -prune -type d -exec rm -rf "{}" \;
		find "${D}" -name libiberty.a -delete

		# Disable RANDMMAP so PCH works. #301299
		pax-mark r "${D}${LIBEXECPATH}"/{gnat1,cc1,cc1plus}

		# Quiet QA warnings, wait for adacore exec stack patch in gcc 7
		#   (note: needs testing with hardened emulate trampolines)
		#if use hardened ; then
		#	pax-mark Emr "${D}"${BINPATH}/{gnatmake,gnatname,gnatls,gnatclean,gnat}
		#else
		#	export QA_EXECSTACK="${BINPATH:1}/gnatls ${BINPATH:1}/gnatname
		#		${BINPATH:1}/gnatmake ${BINPATH:1}/gnatclean ${BINPATH:1}/gnat
		#		${LIBEXECPATH:1}/gnat1 ${LIBPATH:1}/adalib/libgnat-${SLOT}.so"
		#fi
#		export QA_EXECSTACK="${BINPATH:1}/gnatls ${BINPATH:1}/gnatname
#			${BINPATH:1}/gnatmake ${BINPATH:1}/gnatclean ${BINPATH:1}/gnat"

		use hardened && pax-mark E "${D}${BINPATH}"/{gnatmake,gnatname,gnatls,gnatclean,gnat}

		if use doc ; then
			if (( $(bc <<< "${GNATBRANCH} > 4.3") )) ; then
				#make a convenience info link
				ewarn "Yay!  Math works."
				dosym gnat_ugn.info ${DATAPATH}/info/gnat.info
			fi
		fi
		;;

	move_libs)
		debug-print-section move_libs

		# first we need to remove some stuff to make moving easier
		#rm -rf "${D}${LIBPATH}"/{32,include}
		# gcc insists on installing libs in its own place
		cp -a -t "${D}${LIBPATH}"/ "${D}${PREFIX}"/lib/gcc/"${CTARGET}/${GCCRELEASE}"/*
		cp -a -t "${D}${LIBEXECPATH}"/ "${D}${PREFIX}"/libexec/gcc/"${CTARGET}/${GCCRELEASE}"/*
		rm -rf "${D}${PREFIX}"/libexec/gcc

		# libgcc_s  and, with gcc>=4.0, other libs get installed in multilib specific locations by gcc
		# we pull everything together to simplify working environment
		if is_multilib ; then
			case $(tc-arch) in
				amd64)
					cp -a -t "${D}${LIBPATH}"/ "${D}${PREFIX}"/lib/"${PN}/${CTARGET}/${SLOT}"/*
					mv -t "${D}${LIBPATH}"/32/ "${D}${PREFIX}"/lib32/*
					mv -t "${D}${LIBPATH}"/ "${D}${PREFIX}"/lib64/lib*
					rm -rf "${D}${PREFIX}"/lib "${D}${PREFIX}"/lib32
				;;
				ppc64)
					# not supported yet, will have to be adjusted when we
					# actually build gnat for that arch
				;;
			esac
		else
			# x86 cleanup (maybe arm)
			mv -t "${D}${LIBPATH}"/ "${D}${PREFIX}/lib/gcc/${CTARGET}/${GCCRELEASE}"/*
			mv -t "${D}${LIBPATH}"/ "${D}${PREFIX}"/lib/lib*
			#mv -t "${D}${LIBPATH}"/include/ "${D}${LIBPATH}"/gcc/"${CTARGET}/${GCCRELEASE}"/include/*
			rm -rf "${D}${PREFIX}"/lib/gcc
			rm -rf "${D}${LIBPATH}"/gcc
		fi

		local py gdbdir=/usr/share/gdb/auto-load${LIBPATH/\/lib\//\/$(get_libdir)\/}
		pushd "${D}${LIBPATH}" >/dev/null
		for py in $(find . -name '*-gdb.py') ; do
			local multidir=${py%/*}
			insinto "${gdbdir}/${multidir}"
			sed -i "/^libdir =/s:=.*:= '${LIBPATH}/${multidir}':" "${py}" || die
			doins "${py}" || die
			rm "${py}" || die
		done
		popd >/dev/null
		;;

	cleanup)
		debug-print-section cleanup

		# force gnatgcc to use its own specs - versions prior to 3.4.6 read specs
		# from system gcc location. Do the simple wrapper trick for now
		# !ATTN! change this if eselect-gnat starts to follow eselect-compiler
		cd "${D}${BINPATH}"
		if [[ ${GCCVER} < 3.4.6 ]] ; then
			# gcc 4.1 uses builtin specs. What about 4.0?
			mv gnatgcc gnatgcc_2wrap
			cat > gnatgcc << EOF
#! /bin/bash
# wrapper to cause gnatgcc read appropriate specs and search for the right .h
# files (in case no matching gcc is installed)
BINDIR=\$(dirname \$0)
# The paths in the next line have to be absolute, as gnatgcc may be called from
# any location
\${BINDIR}/gnatgcc_2wrap -specs="${LIBPATH}/specs" -I"${LIBPATH}/include" \$@
EOF
			chmod a+x gnatgcc
		else
			local i
			for i in cpp gcc gcov c++ g++ ; do
				ln -s ${i} gnat${i}
			done
		fi

		# earlier gnat's generate some Makefile's at generic location, need to
		# move to avoid collisions
		[ -f "${D}${PREFIX}"/share/gnat/Makefile.generic ] &&
			mv "${D}${PREFIX}"/share/gnat/Makefile.* "${D}${DATAPATH}"

		rm -rf "${D}${LIBPATH}"/install-tools "${D}${LIBEXECPATH}"/install-tools

		# remove duplicate docs
		rm -rf  "${D}${DATAPATH}"/info
		rm -rf "${D}${DATAPATH}"/man

		# fix .la path for lto plugin
		[ -f "${D}${LIBEXECPATH}"/liblto_plugin.la ] &&
			sed -i -e \
				"/libdir=/c\libdir='${LIBEXECPATH}'" \
				"${D}${LIBEXECPATH}"/liblto_plugin.la

		# use gid of 0 because some stupid ports don't have
		# the group 'root' set to gid 0 (toolchain.eclass)
		chown -R root:0 "${D}${LIBPATH}" 2>/dev/null

		# add hardening spec stuff
		if use hardened ; then
			insinto "${LIBPATH}"
			doins "${WORKDIR}"/specs/*.specs || die "failed to install specs"
		fi
		;;

	prep_env)
		# instead of putting junk under /etc/env.d/gnat we recreate env files as
		# needed with eselect
		create_eselect_conf
		;;

	all)
		# remove the move to test new install paths # move_libs
		gnatbuild-r1_src_install install move_libs cleanup prep_env
		;;
	esac
	shift
	done # while
}
# -- end gnatbuild-r1_src_install