sys-auth/nss-pam-ldapd: Remove old

Signed-off-by: Michał Górny <mgorny@gentoo.org>

2 files changed, 0 insertions, 188 deletions

diff --git a/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.11-pynslcd-module-paths.patch b/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.11-pynslcd-module-paths.patch
deleted file mode 100644
index 75ad1015afc1..000000000000
--- a/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.11-pynslcd-module-paths.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff --git a/pynslcd/pynslcd.py b/pynslcd/pynslcd.py
-index 0691b61..df2ca4a 100755
---- a/pynslcd/pynslcd.py
-+++ b/pynslcd/pynslcd.py
-@@ -30,13 +30,13 @@ import threading
- import daemon
- import ldap
- 
--import cfg
--import common
--import constants
--import invalidator
--import mypidfile
--import search
--from tio import TIOStream
-+import pynslcd.cfg
-+import pynslcd.common
-+import pynslcd.constants
-+import pynslcd.invalidator
-+import pynslcd.mypidfile
-+import pynslcd.search
-+from pynslcd.tio import TIOStream
- 
- 
- # the name of the program
diff --git a/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.11-r2.ebuild b/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.11-r2.ebuild
deleted file mode 100644
index 58c7e24d6301..000000000000
--- a/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.11-r2.ebuild
+++ /dev/null
@@ -1,163 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=(python3_7)
-inherit prefix user python-r1 multilib multilib-minimal systemd s6 tmpfiles
-
-DESCRIPTION="NSS module for name lookups using LDAP"
-HOMEPAGE="https://arthurdejong.org/nss-pam-ldapd/"
-SRC_URI="https://arthurdejong.org/${PN}/${P}.tar.gz"
-
-LICENSE="LGPL-2.1"
-SLOT="0"
-KEYWORDS="amd64 x86"
-IUSE="debug kerberos +pam pynslcd sasl test +utils"
-RESTRICT="!test? ( test )"
-
-COMMON_DEP="
-	net-nds/openldap[${MULTILIB_USEDEP}]
-	sasl? ( dev-libs/cyrus-sasl[${MULTILIB_USEDEP}] )
-	kerberos? ( virtual/krb5[${MULTILIB_USEDEP}] )
-	sys-libs/pam[${MULTILIB_USEDEP}]
-	utils? ( ${PYTHON_DEPS} )
-	pynslcd? (
-		dev-python/python-ldap[${PYTHON_USEDEP}]
-		dev-python/python-daemon[${PYTHON_USEDEP}]
-	)
-	!sys-auth/nss_ldap
-	!sys-auth/pam_ldap"
-RDEPEND="${COMMON_DEP}"
-DEPEND="${COMMON_DEP}
-	test? (
-		${PYTHON_DEPS}
-		dev-python/pylint[${PYTHON_USEDEP}]
-	)
-	sys-devel/automake"
-
-REQUIRED_USE="
-	utils? ( ${PYTHON_REQUIRED_USE} )
-	test? ( ${PYTHON_REQUIRED_USE} pynslcd )"
-
-PATCHES=(
-	"${FILESDIR}"/${PN}-0.9.4-disable-py3-only-linters.patch
-	"${FILESDIR}"/${PN}-0.9.11-pynslcd-module-paths.patch
-)
-
-pkg_setup() {
-	enewgroup nslcd
-	enewuser nslcd -1 -1 -1 nslcd
-}
-
-src_prepare() {
-	cp pynslcd/pynslcd.py "${S}" || die "Copying pynslcd failed"
-
-	default
-	use utils && python_setup
-	touch pynslcd/__init__.py || die "Could not create __init__.py for pynslcd"
-}
-
-multilib_src_configure() {
-	local -a myconf
-
-	myconf=(
-		--disable-utils
-		--enable-warnings
-		--with-ldap-lib=openldap
-		--with-ldap-conf-file=/etc/nslcd.conf
-		--with-nslcd-pidfile=/run/nslcd/nslcd.pid
-		--with-nslcd-socket=/run/nslcd/socket
-		$(usex x86-fbsd '--with-nss-flavour=' '--with-nss-flavour=' 'freebsd' 'glibc')
-		$(use_enable pynslcd)
-		$(use_enable debug)
-		$(use_enable kerberos)
-		$(use_enable pam)
-		$(use_enable sasl)
-	)
-
-	# nss libraries always go in /lib on Gentoo
-	if multilib_is_native_abi ; then
-		myconf+=("--with-pam-seclib-dir=${EPREFIX}/$(get_libdir)/security")
-		myconf+=("--libdir=${EPREFIX}/$(get_libdir)")
-	else
-		myconf+=("--with-pam-seclib-dir=/$(get_libdir)/security")
-		myconf+=("--libdir=/$(get_libdir)")
-	fi
-
-	ECONF_SOURCE="${S}" econf "${myconf[@]}"
-}
-
-multilib_src_install_all() {
-	local script
-
-	newinitd "${FILESDIR}"/nslcd.init nslcd
-	s6_install_service nslcd "${FILESDIR}"/nslcd.s6
-
-	insinto /usr/share/nss-pam-ldapd
-	doins "${WORKDIR}/${P}/nslcd.conf"
-
-	fperms o-r /etc/nslcd.conf
-
-	if use utils; then
-		python_moduleinto nslcd
-		python_foreach_impl python_domodule utils/*.py
-
-		for script in chsh getent; do
-			python_foreach_impl python_newscript utils/${script}.py ${script}.ldap
-		done
-	fi
-	if use pynslcd; then
-		rm -rf "${D}"/usr/share/pynslcd
-		python_moduleinto pynslcd
-		python_foreach_impl python_domodule pynslcd/*.py
-		python_scriptinto /usr/sbin
-		python_newscript pynslcd.py pynslcd
-		newinitd "${FILESDIR}"/pynslcd.init pynslcd
-	fi
-
-	newtmpfiles "${FILESDIR}"/nslcd-tmpfiles.conf nslcd.conf
-	systemd_newunit "${FILESDIR}"/nslcd.service nslcd.service
-}
-
-multilib_src_install() {
-	emake DESTDIR="${D}" install
-
-	if use pynslcd; then
-		python_moduleinto pynslcd
-		python_foreach_impl python_domodule pynslcd/*.py
-	fi
-}
-
-python_test() {
-	PYTHONPATH="${S}" emake check
-}
-
-multilib_src_test() {
-	pushd "${BUILD_DIR}"
-	ln -s ../pynslcd/constants.py utils/constants.py
-	python_foreach_impl python_test
-	popd
-}
-
-pkg_postinst() {
-	echo
-	elog "For this to work you must configure /etc/nslcd.conf"
-	elog "This configuration is similar to pam_ldap's /etc/ldap.conf"
-	echo
-	elog "In order to use nss-pam-ldapd, nslcd needs to be running. You can"
-	elog "start it like this:"
-	elog "  # /etc/init.d/nslcd start"
-	echo
-	elog "You can add it to the default runlevel like so:"
-	elog " # rc-update add nslcd default"
-	elog
-	elog "If you have >=sys-apps/openrc-0.16.3, you can also use s6"
-	elog "to supervise this service."
-	elog "To do this, emerge sys-apps/s6 then add nslcd-s6"
-	elog "default runlevel instead of nslcd."
-	elog
-	elog "If you are upgrading, keep in mind that /etc/nss-ldapd.conf"
-	elog " is now named /etc/nslcd.conf"
-	echo
-}