Remove files/elilo-3.4, it's on the mirrors now

(Portage version: 2.0.54)

1 files changed, 0 insertions, 806 deletions

diff --git a/sys-boot/elilo/files/elilo-3.4 b/sys-boot/elilo/files/elilo-3.4
deleted file mode 100644
index a7a1280ecf74..000000000000
--- a/sys-boot/elilo/files/elilo-3.4
+++ /dev/null
@@ -1,806 +0,0 @@
-#! /bin/sh
-
-###############################################################################
-##
-## elilo installs efi bootloader onto a bootstrap partition (based on ybin)
-## Copyright (C) 2001 Ethan Benson
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-##
-###############################################################################
-
-PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin"
-## allow to run out of /target in boot-floppies
-if [ -n "$PATH_PREFIX" ] ; then
-    PATH="${PATH}:${PATH_PREFIX}/sbin:${PATH_PREFIX}/bin:${PATH_PREFIX}/usr/sbin:${PATH_PREFIX}/usr/bin:${PATH_PREFIX}/usr/local/sbin:${PATH_PREFIX}/usr/local/bin"
-fi
-PRG="${0##*/}"
-SIGINT="$PRG: Interrupt caught ... exiting"
-VERSION=3.4-4
-DEBUG=0
-VERBOSE=0
-TMP="${TMPDIR:-/tmp}"
-TARGET=
-# Beware, /EFI/gentoo occurs with double backslashes in the script too
-# so change those as well as EFIROOT, if need be.
-EFIROOT=/EFI/gentoo
-export LC_COLLATE=C
-
-## catch signals, clean up junk in /tmp.
-trap "cleanup" 0
-trap "cleanup; exit 129" 1
-trap "echo 1>&2 $SIGINT ; cleanup; exit 130" 2
-trap "cleanup; exit 131" 3
-trap "cleanup; exit 143" 15
-
-## define default config file
-CONF=/etc/elilo.conf
-bootconf=$CONF
-ERR=" Error in $CONF:"
-
-## define default configuration
-boot=unconfigured
-
-## allow default to work on packaged and non-packaged elilo. 
-if [ -f /usr/local/lib/elilo/elilo.efi ] ; then
-    install=/usr/local/lib/elilo/elilo.efi
-elif [ -f /usr/lib/elilo/elilo.efi ] ; then
-    install=/usr/lib/elilo/elilo.efi
-fi
-
-## defaults
-efiboot=0
-autoconf=0
-fstype=vfat
-umountproc=0
-
-## elilo autoconf defaults
-label=Linux
-timeout=20
-root=/dev/sda3
-
-# image default is controlled by /etc/kernel-img.conf, if it exists
-if [ -f /etc/kernel-img.conf ] &&
-	egrep -q "^(image|link)_in_boot *= *yes" /etc/kernel-img.conf; then
-    image=/boot/vmlinuz
-else
-    image=/vmlinuz
-fi
-
-## make fake `id' if its missing, outputs 0 since if its missing we
-## are probably running on boot floppies and thus are root.
-if (command -v id > /dev/null 2>&1) ; then 
-    true
-else
-    id()
-    {
-    echo 0
-    }
-fi
-
-## --version output
-version()
-{
-echo \
-"$PRG $VERSION
-Written by Richard Hirst, based on work by Ethan Benson
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-}
-
-## --help output.
-usage()
-{
-echo \
-"Usage: $PRG [OPTION]...
-Update/install bootloader onto a bootstrap partition.
-
-  -b, --boot                 set bootstrap partition device [ -b /dev/sda1 ]
-  -i, --install              pathname to the actual bootloader binary
-                               default: /usr/{local/}lib/elilo/elilo.efi
-  -C, --config               use alternate configuration file [ -C config_file ]
-      --autoconf             auto-generate a /etc/elilo.conf
-      --efiboot              elilo auto configuration: create an efi boot
-                               manager entry for elilo
-      --timeout              elilo auto configuration: sets the time elilo
-			       will wait for user input before booting default
-                               image default: 20 (2 seconds)
-      --image                elilo auto configuration: sets the path to the
-			       kernel image. default: /vmlinuz
-      --label                elilo auto configuration: sets the image label
-                               default: Linux
-      --root                 elilo auto configuration: sets the root device
-                               default: /dev/sda3
-      --format               create a new FAT filesystem on the boot partition
-  -v, --verbose              make $PRG more verbose
-      --debug                print boring junk only useful for debugging
-  -h, --help                 display this help and exit
-  -V, --version              output version information and exit"
-}
-
-## we have to do some things differently with a retarded devfs name.
-ckdevfs()
-{
-    case "$1" in
-	/dev/ide/*|/dev/scsi/*|/dev/discs/*)
-	return 0
-	;;
-    *)
-	return 1
-	;;
-    esac
-}
-
-## the SmartArray RAID controllers use /dev/cciss/c0d0p1 kinds of names...
-ckcciss()
-{
-    case "$1" in
-	/dev/cciss/*)
-	return 0
-	;;
-    *)
-	return 1
-	;;
-    esac
-}
-
-
-## configuration file parsing. FIXME: need a method which can parse
-## image= sections.
-parseconf()
-{
-case "$1" in
-    str)
-       v=`grep "^$2[\ ,=]" "$CONF"` ; echo "${v#*=}"
-       ;;
-    flag)
-       grep "^$2\>" "$CONF" > /dev/null && echo 0 || echo 1
-       ;;
-    ck)
-       grep "^$2[\ ,=]" "$CONF" > /dev/null && echo 0 || echo 1
-       ;;
-esac
-}
-
-## check for existence of a configuration file, and make sure we have
-## read permission.
-confexist()
-{
-    if [ ! -e "$CONF" ] ; then
-	echo 1>&2 "$PRG: $CONF: No such file or directory"
-	return 1
-    elif [ ! -f "$CONF" ] ; then
-	echo 1>&2 "$PRG: $CONF: Not a regular file"
-	return 1
-    elif [ ! -r "$CONF" ] ; then
-	echo 1>&2 "$PRG: $CONF: Permission denied"
-	return 1
-    else
-	return 0
-    fi
-}
-
-## check to make sure the configuration file is sane and correct.
-## maybe this is an insane ammount of error checking, but I want to
-## make sure (hopefully) nothing unexpected ever happens.  and i just
-## like useful errors from programs.  every error just marks an error
-## variable so we give the user as much info as possible before we
-## abandon ship.
-checkconf()
-{
-    if [ ! -e "$boot" ] ; then
-	echo 1>&2 "$PRG: $boot: No such file or directory"
-	local CONFERR=1
-    elif [ ! -b "$boot" -a ! -f "$boot" ] ; then
-	echo 1>&2 "$PRG: $boot: Not a regular file or block device"
-	local CONFERR=1
-    elif [ ! -w "$boot" -o ! -r "$boot" ] ; then
-	echo 1>&2 "$PRG: $boot: Permission denied"
-	CONFERR=1
-    fi
-
-    ## sanity check, make sure boot=bootstrap and not something dumb
-    ## like /dev/hda
-    case "$boot" in
-	*hda)
-	    echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of all data on $boot"
-	    local CONFERR=1
-	    ;;
-	*sda)
-	    echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of all data on $boot"
-	    local CONFERR=1
-	    ;;
-	*disc)
-	    echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of all data on $boot"
-	    local CONFERR=1
-	    ;;
-    esac
-
-    ## now make sure its not something dumb like the root partition
-    local ROOT="$(v=`df / 2> /dev/null | grep ^/dev/` ; echo ${v%%[ ]*})"
-    local BOOT="$(v=`df /boot 2> /dev/null | grep ^/dev/` ; echo ${v%%[ ]*})"
-    if [ "$boot" = "$ROOT" ] ; then
-	echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of the root filesystem"
-	local CONFERR=1
-    elif [ "$boot" = "$BOOT" ] ; then
-	echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of the /boot filesystem"
-	local CONFERR=1
-    fi
-
-    ## Make sure boot is not already mounted
-    mount | grep "^$boot " > /dev/null
-    if [ $? = 0 ] ; then
-	echo 1>&2 "$PRG: $boot appears to be mounted"
-	local CONFERR=1
-    fi
-
-    if [ ! -e "$install" ] ; then
-	echo 1>&2 "$PRG: $install: No such file or directory"
-	local CONFERR=1
-    elif [ ! -f "$install" ] ; then
-	echo 1>&2 "$PRG: $install: Not a regular file"
-	local CONFERR=1
-    elif [ ! -r "$install" ] ; then
-	echo 1>&2 "$PRG: $install: Permission denied"
-	local CONFERR=1
-    fi
-
-    if [ ! -e "$bootconf" ] ; then
-	echo 1>&2 "$PRG: $bootconf: No such file or directory"
-	local CONFERR=1
-    elif [ ! -f "$bootconf" ] ; then
-	echo 1>&2 "$PRG: $bootconf: Not a regular file"
-	local CONFERR=1
-    elif [ ! -r "$bootconf" ] ; then
-	echo 1>&2 "$PRG: $bootconf: Permission denied"
-	local CONFERR=1
-    fi
-
-    if [ ! -d /proc/efi/vars ] && [ ! -d /sys/firmware/efi/vars ] && [ "$efiboot" = 1 ] && ! modprobe -q efivars; then
-	echo 1>&2 "$PRG: no efi/vars under /proc or /sys/firmware, boot menu not updated"
-	efiboot=0
-    fi
-
-    if [ "$efiboot" = 1 ] ; then
-	## see if efibootmgr exists and is executable
-	if (command -v efibootmgr > /dev/null 2>&1) ; then
-	    [ -x `command -v efibootmgr` ] || MISSING=1 ; else MISSING=1
-	fi
-
-	if [ "$MISSING" = 1 ] ; then
-	    efiboot=0
-	    echo 1>&2 "$PRG: Warning: \`efibootmgr' could not be found, boot menu not updated"
-	fi
-
-	if [ -f "$boot" ] ; then
-	    echo 1>&2 "$PRG: $boot is a regular file, disabling boot menu update"
-	    efiboot=0
-	fi
-    fi
-
-    if [ "$CONFERR" = 1 ] ; then
-	return 1
-    else
-	return 0
-    fi
-}
-
-
-mnt()
-{
-    ## we can even create bootstrap filesystem images directly if you
-    ## ever wanted too.
-    if [ -f "$boot" ] ; then
-	local loop=",loop"
-    else
-	local loop=''
-    fi
-
-    if [ -e "$TMP/bootstrap.$$" ] ; then
-	echo 1>&2 "$PRG: $TMP/bootstrap.$$ exists, aborting."
-	return 1
-    fi
-
-    mkdir -m 700 "$TMP/bootstrap.$$"
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: Could not create mountpoint directory, aborting."
-	return 1
-    fi
-
-    mount | grep "^$boot " > /dev/null
-    if [ $? = 0 ] ; then
-	echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
-	return 1
-    fi
-
-    [ "$VERBOSE" = 1 ] && echo "$PRG: Mounting $boot..."
-    mount -t "$fstype" -o rw,noexec,umask=077$loop "$boot" "$TMP/bootstrap.$$"
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: An error occured mounting $boot"
-	return 1
-    fi
-
-    TARGET="$TMP/bootstrap.$$"
-    return 0
-}
-
-copyfiles()
-{
-    local BTFILE=elilo.efi
-    local CFFILE=elilo.conf
-    local imagefiles=`grep '^image[[:space:]]*=' $bootconf | \
-		sed 's/^image[[:space:]]*=[[:space:]]*//' | grep -v ':'`
-    local initrdfiles=`grep '^[[:space:]]*initrd[[:space:]]*=' $bootconf | \
-		sed 's/.*=[[:space:]]*//' | grep -v ':'`
-
-    ## Point of no return, removing the old EFI/gentoo tree
-    rm -rf $TARGET/$EFIROOT
-    if [ $? != 0 ]; then
-	echo 2>&1 "$PRG: Failed to delete old boot files, aborting"
-	return 1
-    fi
-    mkdir -p $TARGET/$EFIROOT
-
-    ## Add a README to warn that this tree is deleted every time elilo is run
-    echo -ne "\
-This directory tree is managed by /usr/sbin/elilo, and is deleted and\n\
-recreated every time elilo runs.  Any local changes will be lost.\n\
-" > $TARGET/$EFIROOT/README.TXT
-
-    ## this is probably insecure on modern filesystems, but i think
-    ## safe on crippled hfs/dosfs.
-    [ "$VERBOSE" = 1 ] && echo "$PRG: Installing primary bootstrap $install onto $boot..."
-    cp -f "$install" "$TARGET/$EFIROOT/$BTFILE"
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: An error occured while writing to $boot"
-	return 1
-    fi
-
-    [ "$VERBOSE" = 1 ] && echo "$PRG: Installing $bootconf on $boot..."
-    ## we comment out boot= and install=, because they are only really
-    ## needed in the /etc/elilo.conf file, and elilo.efi currently
-    ## doesn't understand them.  We also need to add /EFI/gentoo on to
-    ## the front of any paths that don't contain colons (device paths).
-    sed -e "s|^boot[[:space:]]*=|# &|" -e "s|^install[[:space:]]*=|# &|" \
-	-e "s|\(^image[[:space:]]*=[[:space:]]*\)\([^:]*\)$|\1$EFIROOT\2|" \
-	-e "s|\(^[[:space:]]*initrd[[:space:]]*=[[:space:]]*\)\([^:]*\)$|\1$EFIROOT\2|" \
-	< "$bootconf" > "$TARGET/$EFIROOT/$CFFILE"
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: An error occured while writing to $boot"
-	return 1
-    fi
-
-    [ "$DEBUG" = 1 ] && echo "----" && cat "$TARGET/$EFIROOT/$CFFILE" && echo "----"
-
-    for i in $imagefiles $initrdfiles; do
-	[ "$VERBOSE" = 1 ] && echo "$PRG: Installing $i on $boot..."
-	if [ -f $i ]; then
-	    mkdir -p `dirname "$TARGET/$EFIROOT/$i"`
-	    if [ $? != 0 ] ; then
-		echo 1>&2 "$PRG: An error occured creating directory `dirname $EFIROOT/$i` on $boot"
-		return 1
-	    fi
-	    cp -f "$i" "$TARGET/$EFIROOT/$i"
-	    if [ $? != 0 ] ; then
-		echo 1>&2 "$PRG: An error occured writing $i to $boot"
-		return 1
-	    fi
-	else
-	    echo "$PRG: Warning: $i not found"
-	fi
-    done
-
-    sync ; sync
-
-    ## update the boot-device variable in EFI.
-    if [ "$efiboot" = 1 ] ; then
-	[ "$VERBOSE" = 1 ] && echo "$PRG: Updating EFI boot-device variable..."
-	efiquiet="-q"
-	[ "$VERBOSE" = 1 ] && efiquiet=""
-	if ckdevfs "$boot" ; then
-	    local BOOTDISK="${boot%/*}/disc"
-	    local BOOTPART="${boot##*part}"
-	elif ckcciss "$boot" ; then
-	    local BOOTDISK="${boot%p[0-9]*}"
-	    local BOOTPART="${boot##*[a-z]}"
-	else
-	    local BOOTDISK="${boot%%[0-9]*}"
-	    local BOOTPART="${boot##*[a-z]}"
-	fi
-	if [ -z "$BOOTDISK" -o -z "$BOOTPART" ] ; then
-	    echo 2>&1 "$PRG: Could not determine boot disk, aborting..."
-	    return 1
-	fi
-
-	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: boot-disk      = $BOOTDISK"
-	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: boot-partition = $BOOTPART"
-	# delete other entries with name "Gentoo Linux"
-	for b in `efibootmgr | grep "Gentoo Linux" | awk '{print substr($1,5,4) }'`; do
-	    efibootmgr $efiquiet -b $b -B
-	done
-	# Add a new entry for this installation
-	efibootmgr $efiquiet -c -d $BOOTDISK -p $BOOTPART -w -L "Gentoo Linux" \
-		-l \\EFI\\gentoo\\elilo.efi -u -- elilo -C \\EFI\\gentoo\\elilo.conf
-	if [ $? != 0 ] ; then
-	    echo 1>&2 "$PRG: An error occured while updating boot menu, we'll ignore it"
-	fi
-	# Now, if 2nd and 3rd boot entries are for floppy and CD/DVD,
-	# move them up to 1st and 2nd, making our entry the 3rd.
-	bootorder=$(efibootmgr | sed -n 's/^BootOrder: \(.*\)$/\1/p')
-	boot1st=$(echo $bootorder | sed -n "s/\(....\).*$/\1/p")
-	boot2nd=$(echo $bootorder | sed -n "s/....,\(....\).*$/\1/p")
-	boot3rd=$(echo $bootorder | sed -n "s/....,....,\(....\).*$/\1/p")
-	boot456=$(echo $bootorder | sed -n "s/....,....,....\(.*\).*$/\1/p")
-	name2nd=$(efibootmgr | sed -n "s/^Boot$boot2nd[\*] \(.*\)$/\1/p")
-	name3rd=$(efibootmgr | sed -n "s/^Boot$boot3rd[\*] \(.*\)$/\1/p")
-	name23="@$name2nd@$name3rd"
-	if ( echo $name23 | grep -qi "@floppy" ); then
-	    if ( echo $name23 | grep -qi "@cd") || ( echo $name23 | grep -qi "@dvd"); then
-		efibootmgr $efiquiet -o $boot2nd,$boot3rd,$boot1st$boot456
-	    fi
-	fi
-    fi
-
-    return 0
-}
-
-## mkefifs function.
-mkefifs()
-{
-    mount | grep "^$boot\>" > /dev/null
-    if [ $? = 0 ] ; then
-	echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
-        return 1
-    fi
-
-    if (command -v mkdosfs > /dev/null 2>&1) ; then
-	[ -x `command -v mkdosfs` ] || FAIL=1 ; else FAIL=1 ; fi
-	if [ "$FAIL" = 1 ] ; then
-	    echo 1>&2 "$PRG: mkdosfs is not installed or cannot be found"
-	    return 1
-	fi
-
-    [ "$VERBOSE" = 1 ] && echo "$PRG: Creating DOS filesystem on $boot..."
-    mkdosfs -n bootstrap "$boot" > /dev/null
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: DOS filesystem creation failed!"
-	return 1
-    fi
-    return 0
-}
-
-mkconf()
-{
-## defaults for this are defined at the beginning of the script with
-## other variables.
-
-# We want to create an append= line from the current /proc/cmdline,
-# so things like console=ttyS0 get picked up automatically.
-# We also want to filter out bits of cmdline we are not interested in.
-
-if [ -f /proc/cmdline ]; then
-  cmdline=`cat /proc/cmdline`
-else
-  echo 1>&2 "$PRG: Warning: couldn't read /proc/cmdline, may need to add append=... to elilo.conf"
-  cmdline=""
-fi
-
-append=`echo $cmdline | tr ' ' '\n' | grep -v "^BOOT_IMAGE=" | grep -v "^root=" | grep -v "^ro$" | tr '\n' ' '`
-if [ ! -z "$append" ]; then append="append=\"$append\""; fi
-
-echo \
-"## elilo configuration file generated by elilo $VERSION
-
-install=$install
-boot=$boot
-delay=$timeout
-default=$label
-$append
-
-image=$image
-	label=$label
-	root=$root
-	read-only
-
-image=${image}.old
-	label=${label}OLD
-	root=$root
-	read-only
-" > "$TMPCONF" || return 1
-
-    ## Copy the new elilo.conf to /etc
-    if [ -f $CONF ]; then
-	echo 1>&2 "$PRG: backing up existing $CONF as ${CONF}-"
-	rm -f ${CONF}-
-	mv $CONF ${CONF}-
-    fi
-    cp -f "$TMPCONF" "$CONF"
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: An error occured while writing to $conf"
-	return 1
-    fi
-
-return 0
-}
-
-# check partition will be big enough for all we want to add to it
-
-chkspace()
-{
-    local imagefiles=`grep '^image[[:space:]]*=' $bootconf | \
-		sed 's/^image[[:space:]]*=[[:space:]]*//' | grep -v ':'`
-    local initrdfiles=`grep '^[[:space:]]*initrd[[:space:]]*=' $bootconf | \
-		sed 's/.*=[[:space:]]*//' | grep -v ':'`
-    local bytesneeded=`cat $imagefiles $initrdfiles $install $bootconf 2>/dev/null | wc -c`
-    # convert to KB, allowing 5% overhead
-    local kbneeded=$(( bytesneeded / 1024 + bytesneeded / 20480 ))
-    local kbavailable=$(df -k $TARGET | sed -n "s|^$boot[[:space:]]\+[0-9]\+[[:space:]]\+[0-9]\+[[:space:]]\+\([0-9]\+\).*$|\1|p")
-    if [ -z $kbavailable ]; then
-	echo 2>&1 "$PRG: unable to determine space on $boot, aborting"
-	return 1
-    fi
-    if [ -d $TARGET/$EFIROOT ]; then
-	local kbused=$(du -ks $TARGET/$EFIROOT | sed -n "s/[ 	].*$//p")
-    else
-        local kbused=0
-    fi
-    [ "$VERBOSE" = 1 ] && echo "$PRG: ${kbneeded}KB needed, ${kbavailable}KB free, ${kbused}KB to reuse"
-    kbavailable=$(( kbavailable + kbused ))
-    if [ "$kbavailable" -lt "$kbneeded" ] ; then
-        echo 1>&2 "$PRG: Insufficient space on $boot, need ${kbneeded}KB, only ${kbavailable}KB available"
-        return 1
-    fi
-return 0
-}
-
-
-## take out the trash.
-cleanup()
-{
-    if [ -n "$TARGET" ]; then
-	TARGET=
-        [ "$VERBOSE" = 1 ] && echo "$PRG: Unmounting $boot"
-	umount "$boot"
-	[ $? != 0 ] && echo 2>&1 "$PRG: Warning, failed to unmount $TARGET"
-    fi
-    if [ -n "$TMPCONF" ] ; then rm -f "$TMPCONF" ; fi
-    if [ -d "$TMP/bootstrap.$$" ] ; then rmdir "$TMP/bootstrap.$$" ; fi
-    if [ "$umountproc" = 1 ] ; then umount /proc ; fi
-    return 0
-}
-
-##########
-## Main ##
-##########
-
-## absurdly bloated case statement to parse command line options.
-if [ $# != 0 ] ; then
-    while true ; do
-	case "$1" in 
-	    -V|--version)
-		version
-		exit 0
-		;;
-	    -h|--help)
-		usage
-		exit 0
-		;;
-	    --debug)
-		DEBUG=1
-		shift
-		;;
-	    -v|--verbose)
-		VERBOSE=1
-		shift
-		;;
-	    --force)
-		# allow --force for now, boot-floppies 3.0.20 and
-		# systemconfigurator use that instead of --format
-		echo 1>&2 "$PRG: Warning: --force is now deprecated.  Use --for\mat."
-		echo 1>&2 "Try \`$PRG --help' for more information."
-		FORMAT=yes
-		shift
-		;;
-	    --format)
-		FORMAT=yes
-		shift
-		;;
-	    --autoconf)
-		autoconf=1
-		shift
-		;;
-	    -b|--boot)
-		if [ -n "$2" ] ; then
-		    boot="$2"
-		    ARGBT=1
-		    shift 2
-		else
-		    echo 1>&2 "$PRG: option requires an argument $1"
-		    echo 1>&2 "Try \`$PRG --help' for more information."
-		    exit 1
-		fi
-		;;
-	    -i|--install)
-		if [ -n "$2" ] ; then
-		    install="$2"
-		    ARGBF=1
-		    shift 2
-		else
-		    echo 1>&2 "$PRG: option requires an argument $1"
-		    echo 1>&2 "Try \`$PRG --help' for more information."
-		    exit 1
-		fi
-		;;
-	    -C|--config)
-		if [ -n "$2" ] ; then
-		    CONF="$2"
-		    bootconf="$2"
-		    ERR=" Error in $CONF:"
-		    shift 2
-		else
-		    echo 1>&2 "$PRG: option requires an argument $1"
-		    echo 1>&2 "Try \`$PRG --help' for more information."
-		    exit 1
-		fi
-		;;
-	    --efiboot)
-		efiboot=1
-		ARGNV=1
-		shift
-		;;
-	    --timeout)
-		if [ -n "$2" ] ; then
-		    timeout="$2"
-		    bootconf=auto
-		    shift 2
-		else
-		    echo 1>&2 "$PRG: option requires an argument $1"
-		    echo 1>&2 "Try \`$PRG --help' for more information."
-		    exit 1
-		fi
-		;;
-	    --image)
-		if [ -n "$2" ] ; then
-		    image="$2"
-		    bootconf=auto
-		    shift 2
-		else
-		    echo 1>&2 "$PRG: option requires an argument $1"
-		    echo 1>&2 "Try \`$PRG --help' for more information."
-		    exit 1
-		fi
-		;;
-	    --label)
-		if [ -n "$2" ] ; then
-		    label="$2"
-		    bootconf=auto
-		    shift 2
-		else
-		    echo 1>&2 "$PRG: option requires an argument $1"
-		    echo 1>&2 "Try \`$PRG --help' for more information."
-		    exit 1
-		fi
-		;;
-	    --root)
-		if [ -n "$2" ] ; then
-		    root="$2"
-		    bootconf=auto
-		    shift 2
-		else
-		    echo 1>&2 "$PRG: option requires an argument $1"
-		    echo 1>&2 "Try \`$PRG --help' for more information."
-		    exit 1
-		fi
-		;;
-	    "")
-		break
-		;;
-	    *)
-		echo 1>&2 "$PRG: unrecognized option \`$1'"
-		echo 1>&2 "Try \`$PRG --help' for more information."
-		exit 1
-		;;
-	esac
-    done
-fi
-
-## check that are root
-if [ `id -u` != 0 ] ; then
-    echo 1>&2 "$PRG: requires root privileges, go away."
-    exit 1
-fi
-
-## check that autoconf options are only specified with --autoconf
-if [ "$bootconf" = "auto" -a "$autoconf" = "0" ] ; then
-    echo 1>&2 "$PRG: Auto-config options specified without --autoconf."
-    exit 1;
-fi
-
-## check that specified config file exists, unless we are to generate it,
-## which case we assume all options are done on the command line.
-if [ "$autoconf" = "0" ] ; then
-    confexist || exit 1
-fi
-
-## /proc is needed to parse /proc/partitions, etc.
-if [ ! -f /proc/uptime ]; then
-    [ "$VERBOSE" = 1 ] && echo "$PRG: Mounting /proc..."
-    mount -t proc proc /proc 2> /dev/null
-    if [ $? != 0 ]; then
-	echo 1>&2 "$PRG: Failed to mount /proc, aborting."
-	exit 1
-    fi
-    umountproc=1
-fi
-
-## elilo.conf autogeneration. MUST have secure mktemp to
-## avoid race conditions. GNU's mktemp qualifies.
-if [ "$autoconf" = "1" ] ; then
-    TMPCONF=`mktemp -q "$TMP/$PRG.XXXXXX"`
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: Could not create temporary file, aborting."
-	exit 1
-    fi
-    mkconf
-    if [ $? != 0 ] ; then
-	echo 1>&2 "$PRG: An error occured generating elilo.conf, aborting."
-	exit 1
-    fi
-
-    bootconf="$TMPCONF"
-fi
-
-## Checks if each option was defined on the command line, and if so
-## don't read it from the configuration file. this avoids
-## configuration options from being set null, as well as command line
-## options from being clobbered.
-[ "$ARGBT" != 1 -a $(parseconf ck boot) = 0 ] && boot=`parseconf str boot`
-
-## ffs!! rtfm! foad!
-if [ "$boot" = unconfigured ] ; then
-    echo 1>&2 "$PRG: You must specify the device for the bootstrap partition. (ie: -b /dev/hdaX)"
-    echo 1>&2 "$PRG: Try \`$PRG --help' for more information."
-    exit 1
-fi
-
-## validate configuration for sanity.
-checkconf || exit 1
-
-if [ "$FORMAT" = "yes" ]; then
-    mkefifs || exit 1
-fi
-
-[ "$VERBOSE" = 1 ] && echo "$PRG: Checking filesystem on $boot..."
-dosfsck $boot > /dev/null
-if [ $? != 0 ]; then
-    echo 1>&2 "$PRG: Filesystem on $boot is corrupt, please fix that and rerun $PRG."
-    exit 1
-fi
-
-mnt || exit 1
-chkspace || exit 1
-copyfiles || exit 1
-
-umount $TARGET
-if [ $? != 0 ]; then
-    echo 1>&2 "$PRG: Failed to unmount $boot"
-    exit 1
-fi
-TARGET=
-
-[ "$VERBOSE" = 1 ] && echo "$PRG: Installation complete."
-
-exit 0