diff options
| -rw-r--r-- | sys-apps/hal/ChangeLog | 8 | ||||
| -rw-r--r-- | sys-apps/hal/hal-0.5.11-r1.ebuild | 300 |
2 files changed, 307 insertions, 1 deletions
diff --git a/sys-apps/hal/ChangeLog b/sys-apps/hal/ChangeLog index 2f472c6b39a9..6796118e2dbd 100644 --- a/sys-apps/hal/ChangeLog +++ b/sys-apps/hal/ChangeLog @@ -1,6 +1,12 @@ # ChangeLog for sys-apps/hal # Copyright 1999-2008 Gentoo Foundation; Distributed under the GPL v2 -# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/ChangeLog,v 1.237 2008/05/22 10:52:28 klausman Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/ChangeLog,v 1.238 2008/05/29 02:26:11 compnerd Exp $ + +*hal-0.5.11-r1 (29 May 2008) + + 29 May 2008; Saleem Abdulrasool <compnerd@gentoo.org> + +hal-0.5.11-r1.ebuild: + Fix building with libtool, optionalize the X dep with the X useflag. 22 May 2008; Tobias Klausmann <klausman@gentoo.org> hal-0.5.11.ebuild: Keyworded on alpha, bug #222899 diff --git a/sys-apps/hal/hal-0.5.11-r1.ebuild b/sys-apps/hal/hal-0.5.11-r1.ebuild new file mode 100644 index 000000000000..b500041fc756 --- /dev/null +++ b/sys-apps/hal/hal-0.5.11-r1.ebuild @@ -0,0 +1,300 @@ +# Copyright 1999-2008 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.11-r1.ebuild,v 1.1 2008/05/29 02:26:11 compnerd Exp $ + +inherit eutils linux-info autotools flag-o-matic + +PATCH_VERSION="1" + +DESCRIPTION="Hardware Abstraction Layer" +HOMEPAGE="http://www.freedesktop.org/Software/hal" +SRC_URI="http://hal.freedesktop.org/releases/${P/_/}.tar.bz2 + http://dev.gentoo.org/~compnerd/files/${PN}/${P}-gentoo-patches-${PATCH_VERSION}.tar.bz2" + +LICENSE="|| ( GPL-2 AFL-2.0 )" +SLOT="0" +KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~sparc ~x86" + +KERNEL_IUSE="kernel_linux kernel_FreeBSD" +IUSE="X acpi apm crypt debug dell disk-partition doc laptop selinux ${KERNEL_IUSE}" + +RDEPEND=">=dev-libs/dbus-glib-0.61 + >=dev-libs/glib-2.14 + >=dev-libs/expat-1.95.8 + >=dev-libs/libusb-0.1.10a + >=sys-apps/pciutils-2.2.7-r1 + >=dev-util/gperf-3.0.3 + sys-apps/usbutils + virtual/eject + amd64? ( >=sys-apps/dmidecode-2.7 ) + dell? ( >=sys-libs/libsmbios-0.13.4 ) + disk-partition? ( >=sys-apps/parted-1.8.0 ) + ia64? ( >=sys-apps/dmidecode-2.7 ) + kernel_linux? ( + >=sys-fs/udev-111 + >=sys-apps/util-linux-2.13 + >=sys-kernel/linux-headers-2.6.19 + crypt? ( + || ( + >=sys-fs/cryptsetup-1.0.5 + >=sys-fs/cryptsetup-luks-1.0.1 + ) + ) + ) + kernel_FreeBSD? ( dev-libs/libvolume_id ) + x86? ( >=sys-apps/dmidecode-2.7 ) + selinux? ( sys-libs/libselinux sec-policy/selinux-hal )" +DEPEND="${RDEPEND} + dev-util/pkgconfig + >=dev-util/intltool-0.35 + X? ( >=dev-python/pyxf86config-0.3.34-r1 ) + doc? ( + app-doc/doxygen + app-text/docbook-sgml-utils + app-text/xmlto + dev-libs/libxml2 + )" +PDEPEND="=app-misc/hal-info-20080310 + !gnome-extra/hal-device-manager + laptop? ( >=sys-power/pm-utils-0.99.3 )" + +## HAL Daemon drops privledges so we need group access to read disks +HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb" +HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator" + +function check_hotplug_net() { + local CONFIG_CHECK="~HOTPLUG ~NET" + local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)\n" + local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)\n" + check_extra_config +} + +function check_inotify() { + local CONFIG_CHECK="~INOTIFY_USER" + local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)\n" + check_extra_config +} + +function check_acpi_proc() { + local CONFIG_CHECK="~ACPI_PROCFS ~ACPI_PROC_EVENT" + local WARNING_ACPI_PROCFS="CONFIG_ACPI_PROCFS:\tis not set (required for HAL)\n" + local WARNING_ACPI_PROC_EVENT="CONFIG_ACPI_PROC_EVENT:\tis not set (required for HAL)\n" + check_extra_config +} + +pkg_setup() { + if use kernel_linux ; then + if [[ -e "${ROOT}/usr/src/linux/.config" ]] ; then + kernel_is ge 2 6 19 || ewarn "HAL requires a kernel version 2.6.19 or newer" + + if kernel_is lt 2 6 23 && use acpi ; then + check_acpi_proc + fi + fi + + check_hotplug_net + check_inotify + fi + + # http://devmanual.gentoo.org/ebuild-writing/functions/ + # http://bugs.gentoo.org/show_bug.cgi?id=191605 + + # Create groups for hotplugging and HAL + enewgroup haldaemon || die "Problem adding haldaemon group" + enewgroup plugdev || die "Problem adding plugdev group" + + # HAL drops priviledges by default now ... + # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups) + if use kernel_linux; then + enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX} || die "Problem adding haldaemon user" + elif use kernel_FreeBSD; then + enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD} || die "Problem addding haldaemon user" + fi + + # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS} + # If users have a problem with this, let them file a bug + if [[ ${ROOT} == / ]] ; then + if use kernel_linux; then + usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon + elif use kernel_FreeBSD; then + pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD} + fi + fi +} + +S="${WORKDIR}/${PF/-r*/}" + +src_unpack() { + unpack ${A} + cd "${S}" + + EPATCH_MULTI_MSG="Applying Gentoo Patchset ..." \ + EPATCH_SUFFIX="patch" \ + EPATCH_SOURCE="${WORKDIR}/${P}-patches/" \ + EPATCH_FORCE="yes" \ + epatch + + eautoreconf +} + +src_compile() { + local acpi="$(use_enable acpi)" + local backend= + local hardware= + + append-flags -rdynamic + + if use kernel_linux ; then + backend="linux" + elif use kernel_FreeBSD ; then + backend="freebsd" + else + eerror "Invalid backend" + fi + + if use kernel_linux ; then + if use acpi ; then + # Using IBM ACPI and Toshiba ACPI results in double notification as this + # was merged into the Linux Kernel 2.6.22 + if kernel_is lt 2 6 22 ; then + acpi="$acpi --enable-acpi-ibm --enable-acpi-toshiba" + else + acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba" + fi + + acpi="$acpi --enable-acpi-proc --enable-acpi-acpid" + else + acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba" + acpi="$acpi --disable-acpi-proc --disable-acpi-acpid" + fi + + hardware="--with-cpufreq --with-usb-csr --with-keymaps" + use arm && hardware="$hardware --enable-omap" + + if use dell ; then + hardware="$hardware --with-dell-backlight" + else + hardware="$hardware --without-dell-backlight" + fi + else + hardware="--without-cpufreq --without-usb-csr --without-keymaps" + hardware="$hardware --disable-omap" + hardware="$hardware --without-dell-backlight" + hardware="$hardware --enable-acpi-ibm --enable-acpi-toshiba" + fi + + econf --with-backend=${backend} \ + --with-os-type=gentoo \ + --with-pid-file=/var/run/hald.pid \ + --with-hwdata=/usr/share/misc \ + --with-socket-dir=/var/run/hald \ + --enable-umount-helper \ + --enable-man-pages \ + --disable-policy-kit \ + --disable-console-kit \ + --disable-acl-management \ + --enable-pci \ + --enable-sonypic \ + $(use_enable apm) \ + $(use_enable arm pmu) \ + $(use_with arm omap) \ + $(use_enable debug verbose-mode) \ + $(use_enable disk-partition parted) \ + $(use_enable doc docbook-docs) \ + $(use_enable doc doxygen-docs) \ + --docdir=/usr/share/doc/${PF} \ + --localstatedir=/var \ + ${acpi} ${hardware} \ + || die "configure failed" + + emake || die "make failed" +} + +src_install() { + make DESTDIR="${D}" install || die + dodoc AUTHORS ChangeLog NEWS README + + # hal umount for unclean unmounts + exeinto /lib/udev/ + newexe "${FILESDIR}/hal-unmount.dev" hal_unmount + + # initscript + newinitd "${FILESDIR}/0.5.10-hald.rc" hald + + # configuration + cp "${FILESDIR}/0.5.10-hald.conf" "${WORKDIR}/" + + if use debug; then + sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \ + -i "${WORKDIR}/0.5.10-hald.conf" + fi + newconfd "${WORKDIR}/0.5.10-hald.conf" hald + + if use X ; then + # New Configuration Snippets + dodoc "${WORKDIR}/${P}-extras/"*.fdi + dobin "${WORKDIR}/${P}-extras/migrate-xorg-to-fdi.py" + + # Automagic conversion! + elog "Migrating xorg.conf Core Keyboard configuration to HAL FDI file..." + "${WORKDIR}/${P}-extras/migrate-xorg-to-fdi.py" 2> /dev/null > "${D}/etc/hal/fdi/policy/10-x11-input.fdi" + fi + + # We now create and keep /media here as both gnome-mount and pmount + # use these directories, to avoid collision. + keepdir /media + + # We also need to create and keep /etc/fdi/{information,policy,preprobe} + # or else hal bombs. + keepdir /etc/hal/fdi/{information,policy,preprobe} + + # HAL stores it's fdi cache in /var/lib/cache/hald + keepdir /var/lib/cache/hald + + # HAL keeps its unix socket here + keepdir /var/run/hald + keepdir /var/lib/hal +} + +pkg_postinst() { + # Despite what people keep changing this location. Either one works.. it doesn't matter + # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/ + + elog "The HAL daemon needs to be running for certain applications to" + elog "work. Suggested is to add the init script to your start-up" + elog "scripts, this should be done like this :" + elog "\`rc-update add hald default\`" + echo + elog "Looking for automounting support? Add yourself to the plugdev group" + echo + elog "IF you have additional applications which consume ACPI events, you" + elog "should consider installing acpid to allow applications to share ACPI" + elog "events." + if use X ; then + echo + elog "If you wish to use a non US layout, you may do so by executing:" + elog "setxkbmap <layout> or by utilizing your Desktop Environment's" + elog "Keyboard Layout Settings mechanism." + elog "Under GNOME, this is gnome-keyboard-properties, and under KDE" + elog "it is kxkb." + fi + echo + elog "In order have suspend/hibernate function with HAL or apps that use HAL" + elog "(such as gnome-power-manager), you should build HAL with the laptop" + elog "useflag which will install pm-utils." + if use X ; then + echo + elog "X Input Hotplugging (if you build xorg-server with the HAL useflag)" + elog "reads user specific configuration from /etc/hal/fdi/policy/." + if [[ $(cat "${ROOT}etc/hal/fdi/policy/10-x11-input.fdi" | wc -c) -gt 0 ]] + then + elog "We have converted your existing xorg.conf rules and the FDI is stored" + elog "at /etc/hal/fdi/policy/10-x11-input.fdi" + fi + elog "You should remove the Input sections from your xorg.conf once you have" + elog "migrated the rules to a HAL fdi file." + fi + + ebeep 5 + epause 5 +} |