diff options
| -rw-r--r-- | Modules/Setup.config.in | 21 | ||||
| -rw-r--r-- | Modules/Setup.dist | 4 | ||||
| -rwxr-xr-x | configure | 457 | ||||
| -rw-r--r-- | configure.in | 15 |
4 files changed, 306 insertions, 191 deletions
diff --git a/Modules/Setup.config.in b/Modules/Setup.config.in index f9c58516e3e..424099fdec8 100644 --- a/Modules/Setup.config.in +++ b/Modules/Setup.config.in @@ -1,19 +1,24 @@ # This file is transmogrified into Setup.config by config.status. # The purpose of this file is to conditionally enable certain modules -# based on configure-time options. Currently thread support, garbage -# collection support, and the BSD DB modules are the only modules so -# enabled. - -@USE_THREAD_MODULE@thread threadmodule.c +# based on configure-time options. # Garbage collection enabled with --with-cycle-gc @USE_GC_MODULE@gc gcmodule.c -# You may want this to be built as a dynamically loaded module; uncomment -# the following line in that case: +# Threading +@USE_THREAD_MODULE@thread threadmodule.c + +# You may want the following to be built as statically loaded modules; +# comment out the *shared* line in that case: + +*shared* + +# Readline +@USE_READLINE_MODULE@readline readline.c -lreadline -ltermcap -#*shared* +# The ncurses library, under Linux +@USE_NCURSES_MODULE@_curses _cursesmodule.c -lncurses -ltermcap # bsddb module enabled by --with-libdb or presence of db.h @USE_BSDDB_MODULE@bsddb bsddbmodule.c @HAVE_LIBDB@ diff --git a/Modules/Setup.dist b/Modules/Setup.dist index 53ab1fb3baa..522ca527dab 100644 --- a/Modules/Setup.dist +++ b/Modules/Setup.dist @@ -120,6 +120,8 @@ GLHACK=-Dclear=__GLclear # and you may have to change -ltermcap to -ltermlib or perhaps remove # it, depending on your system -- see the GNU readline instructions. # It's okay for this to be a shared library, too. +# +# First, look at Setup.config; configure may have set this for you. #readline readline.c -lreadline -ltermcap @@ -322,6 +324,8 @@ rotor rotormodule.c # enigma-inspired encryption # provided by the ncurses library. e.g. on Linux, link with -lncurses # instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include # -L/usr/5lib before -lcurses). +# +# First, look at Setup.config; configure may have set this for you. #_curses _cursesmodule.c -lcurses -ltermcap # Wrapper for the panel library that's part of ncurses and SYSV curses. diff --git a/configure b/configure index fed8a06d4f2..c9f4a186343 100755 --- a/configure +++ b/configure @@ -1,6 +1,6 @@ #! /bin/sh -# From configure.in Revision: 1.182 +# From configure.in Revision: 1.184 # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 @@ -3141,11 +3141,100 @@ else fi +# This is used to generate Setup.config + +echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6 +echo "configure:3148: checking for initscr in -lncurses" >&5 +ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lncurses -ltermcap $LIBS" +cat > conftest.$ac_ext <<EOF +#line 3156 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char initscr(); + +int main() { +initscr() +; return 0; } +EOF +if { (eval echo configure:3167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + USE_NCURSES_MODULE="" +else + echo "$ac_t""no" 1>&6 +USE_NCURSES_MODULE="#" +fi + + +# This is used to generate Setup.config + +echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6 +echo "configure:3192: checking for readline in -lreadline" >&5 +ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lreadline -ltermcap $LIBS" +cat > conftest.$ac_ext <<EOF +#line 3200 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char readline(); + +int main() { +readline() +; return 0; } +EOF +if { (eval echo configure:3211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + USE_READLINE_MODULE="" +else + echo "$ac_t""no" 1>&6 +USE_READLINE_MODULE="#" +fi + + +# This is used to generate Setup.config USE_THREAD_MODULE="" echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6 -echo "configure:3149: checking for --with-dec-threads" >&5 +echo "configure:3238: checking for --with-dec-threads" >&5 # Check whether --with-dec-threads or --without-dec-threads was given. if test "${with_dec_threads+set}" = set; then @@ -3162,7 +3251,7 @@ fi echo $ac_n "checking for --with-threads""... $ac_c" 1>&6 -echo "configure:3166: checking for --with-threads" >&5 +echo "configure:3255: checking for --with-threads" >&5 # Check whether --with-threads or --without-threads was given. if test "${with_threads+set}" = set; then withval="$with_threads" @@ -3200,17 +3289,17 @@ EOF ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6 -echo "configure:3204: checking for mach/cthreads.h" >&5 +echo "configure:3293: checking for mach/cthreads.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3209 "configure" +#line 3298 "configure" #include "confdefs.h" #include <mach/cthreads.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3214: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3303: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3239,7 +3328,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for --with-pth""... $ac_c" 1>&6 -echo "configure:3243: checking for --with-pth" >&5 +echo "configure:3332: checking for --with-pth" >&5 # Check whether --with-pth or --without-pth was given. if test "${with_pth+set}" = set; then withval="$with_pth" @@ -3259,7 +3348,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6 -echo "configure:3263: checking for pthread_create in -lpthread" >&5 +echo "configure:3352: checking for pthread_create in -lpthread" >&5 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3267,7 +3356,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lpthread $LIBS" cat > conftest.$ac_ext <<EOF -#line 3271 "configure" +#line 3360 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3278,7 +3367,7 @@ int main() { pthread_create() ; return 0; } EOF -if { (eval echo configure:3282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3307,12 +3396,12 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6 -echo "configure:3311: checking for pthread_detach" >&5 +echo "configure:3400: checking for pthread_detach" >&5 if eval "test \"`echo '$''{'ac_cv_func_pthread_detach'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3316 "configure" +#line 3405 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char pthread_detach(); below. */ @@ -3335,7 +3424,7 @@ pthread_detach(); ; return 0; } EOF -if { (eval echo configure:3339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_pthread_detach=yes" else @@ -3366,17 +3455,17 @@ else ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6 -echo "configure:3370: checking for kernel/OS.h" >&5 +echo "configure:3459: checking for kernel/OS.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3375 "configure" +#line 3464 "configure" #include "confdefs.h" #include <kernel/OS.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3380: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3469: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3405,7 +3494,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6 -echo "configure:3409: checking for pthread_create in -lpthreads" >&5 +echo "configure:3498: checking for pthread_create in -lpthreads" >&5 ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3413,7 +3502,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lpthreads $LIBS" cat > conftest.$ac_ext <<EOF -#line 3417 "configure" +#line 3506 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3424,7 +3513,7 @@ int main() { pthread_create() ; return 0; } EOF -if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3453,7 +3542,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6 -echo "configure:3457: checking for pthread_create in -lc_r" >&5 +echo "configure:3546: checking for pthread_create in -lc_r" >&5 ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3461,7 +3550,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lc_r $LIBS" cat > conftest.$ac_ext <<EOF -#line 3465 "configure" +#line 3554 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3472,7 +3561,7 @@ int main() { pthread_create() ; return 0; } EOF -if { (eval echo configure:3476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3501,7 +3590,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6 -echo "configure:3505: checking for __d6_pthread_create in -lthread" >&5 +echo "configure:3594: checking for __d6_pthread_create in -lthread" >&5 ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3509,7 +3598,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lthread $LIBS" cat > conftest.$ac_ext <<EOF -#line 3513 "configure" +#line 3602 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3520,7 +3609,7 @@ int main() { __d6_pthread_create() ; return 0; } EOF -if { (eval echo configure:3524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3549,7 +3638,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6 -echo "configure:3553: checking for __pthread_create_system in -lpthread" >&5 +echo "configure:3642: checking for __pthread_create_system in -lpthread" >&5 ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3557,7 +3646,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lpthread $LIBS" cat > conftest.$ac_ext <<EOF -#line 3561 "configure" +#line 3650 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3568,7 +3657,7 @@ int main() { __pthread_create_system() ; return 0; } EOF -if { (eval echo configure:3572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3597,7 +3686,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6 -echo "configure:3601: checking for pthread_create in -lcma" >&5 +echo "configure:3690: checking for pthread_create in -lcma" >&5 ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3605,7 +3694,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lcma $LIBS" cat > conftest.$ac_ext <<EOF -#line 3609 "configure" +#line 3698 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3616,7 +3705,7 @@ int main() { pthread_create() ; return 0; } EOF -if { (eval echo configure:3620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3668,7 +3757,7 @@ fi echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6 -echo "configure:3672: checking for usconfig in -lmpc" >&5 +echo "configure:3761: checking for usconfig in -lmpc" >&5 ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3676,7 +3765,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lmpc $LIBS" cat > conftest.$ac_ext <<EOF -#line 3680 "configure" +#line 3769 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3687,7 +3776,7 @@ int main() { usconfig() ; return 0; } EOF -if { (eval echo configure:3691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3714,7 +3803,7 @@ else fi echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6 -echo "configure:3718: checking for thr_create in -lthread" >&5 +echo "configure:3807: checking for thr_create in -lthread" >&5 ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3722,7 +3811,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lthread $LIBS" cat > conftest.$ac_ext <<EOF -#line 3726 "configure" +#line 3815 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3733,7 +3822,7 @@ int main() { thr_create() ; return 0; } EOF -if { (eval echo configure:3737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3774,7 +3863,7 @@ fi USE_GC_MODULE="" echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6 -echo "configure:3778: checking for --with-cycle-gc" >&5 +echo "configure:3867: checking for --with-cycle-gc" >&5 # Check whether --with-cycle-gc or --without-cycle-gc was given. if test "${with_cycle_gc+set}" = set; then withval="$with_cycle_gc" @@ -3801,7 +3890,7 @@ echo "$ac_t""$with_cycle_gc" 1>&6 USE_BSDDB_MODULE="" echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6 -echo "configure:3805: checking for --with-libdb" >&5 +echo "configure:3894: checking for --with-libdb" >&5 # Check whether --with-libdb or --without-libdb was given. if test "${with_libdb+set}" = set; then withval="$with_libdb" @@ -3844,12 +3933,12 @@ then # Instead, we just trust it is in libdb; linking will fail if it # is not. echo $ac_n "checking for dbopen""... $ac_c" 1>&6 -echo "configure:3848: checking for dbopen" >&5 +echo "configure:3937: checking for dbopen" >&5 if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3853 "configure" +#line 3942 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char dbopen(); below. */ @@ -3872,7 +3961,7 @@ dbopen(); ; return 0; } EOF -if { (eval echo configure:3876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_dbopen=yes" else @@ -3896,7 +3985,7 @@ fi # Check for --with-wctype-functions echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6 -echo "configure:3900: checking for --with-wctype-functions" >&5 +echo "configure:3989: checking for --with-wctype-functions" >&5 # Check whether --with-wctype-functions or --without-wctype-functions was given. if test "${with_wctype_functions+set}" = set; then withval="$with_wctype_functions" @@ -3918,7 +4007,7 @@ fi DLINCLDIR=/ echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6 -echo "configure:3922: checking for --with-sgi-dl" >&5 +echo "configure:4011: checking for --with-sgi-dl" >&5 # Check whether --with-sgi-dl or --without-sgi-dl was given. if test "${with_sgi_dl+set}" = set; then withval="$with_sgi_dl" @@ -3942,7 +4031,7 @@ fi echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6 -echo "configure:3946: checking for --with-dl-dld" >&5 +echo "configure:4035: checking for --with-dl-dld" >&5 # Check whether --with-dl-dld or --without-dl-dld was given. if test "${with_dl_dld+set}" = set; then withval="$with_dl_dld" @@ -3971,12 +4060,12 @@ fi for ac_func in dlopen do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3975: checking for $ac_func" >&5 +echo "configure:4064: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3980 "configure" +#line 4069 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3999,7 +4088,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4028,7 +4117,7 @@ done # loading of modules. echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6 -echo "configure:4032: checking DYNLOADFILE" >&5 +echo "configure:4121: checking DYNLOADFILE" >&5 if test -z "$DYNLOADFILE" then case $ac_sys_system/$ac_sys_release in @@ -4069,12 +4158,12 @@ for ac_func in alarm chown clock confstr ctermid ctermid_r execv \ truncate uname waitpid _getpty do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4073: checking for $ac_func" >&5 +echo "configure:4162: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4078 "configure" +#line 4167 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4097,7 +4186,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4127,12 +4216,12 @@ done for ac_func in openpty do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4131: checking for $ac_func" >&5 +echo "configure:4220: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4136 "configure" +#line 4225 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4155,7 +4244,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4177,7 +4266,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6 -echo "configure:4181: checking for openpty in -lutil" >&5 +echo "configure:4270: checking for openpty in -lutil" >&5 ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4185,7 +4274,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lutil $LIBS" cat > conftest.$ac_ext <<EOF -#line 4189 "configure" +#line 4278 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -4196,7 +4285,7 @@ int main() { openpty() ; return 0; } EOF -if { (eval echo configure:4200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4225,12 +4314,12 @@ done for ac_func in forkpty do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4229: checking for $ac_func" >&5 +echo "configure:4318: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4234 "configure" +#line 4323 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4253,7 +4342,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4275,7 +4364,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6 -echo "configure:4279: checking for forkpty in -lutil" >&5 +echo "configure:4368: checking for forkpty in -lutil" >&5 ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4283,7 +4372,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lutil $LIBS" cat > conftest.$ac_ext <<EOF -#line 4287 "configure" +#line 4376 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -4294,7 +4383,7 @@ int main() { forkpty() ; return 0; } EOF -if { (eval echo configure:4298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4325,12 +4414,12 @@ done for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4329: checking for $ac_func" >&5 +echo "configure:4418: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4334 "configure" +#line 4423 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4353,7 +4442,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4381,12 +4470,12 @@ done for ac_func in dup2 getcwd strdup strerror memmove do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4385: checking for $ac_func" >&5 +echo "configure:4474: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4390 "configure" +#line 4479 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4409,7 +4498,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4438,12 +4527,12 @@ done for ac_func in getpgrp do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4442: checking for $ac_func" >&5 +echo "configure:4531: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4447 "configure" +#line 4536 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4466,7 +4555,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4485,14 +4574,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then #define $ac_tr_func 1 EOF cat > conftest.$ac_ext <<EOF -#line 4489 "configure" +#line 4578 "configure" #include "confdefs.h" #include <unistd.h> int main() { getpgrp(0); ; return 0; } EOF -if { (eval echo configure:4496: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF #define GETPGRP_HAVE_ARG 1 @@ -4511,12 +4600,12 @@ done for ac_func in setpgrp do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4515: checking for $ac_func" >&5 +echo "configure:4604: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4520 "configure" +#line 4609 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4539,7 +4628,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4558,14 +4647,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then #define $ac_tr_func 1 EOF cat > conftest.$ac_ext <<EOF -#line 4562 "configure" +#line 4651 "configure" #include "confdefs.h" #include <unistd.h> int main() { setpgrp(0,0); ; return 0; } EOF -if { (eval echo configure:4569: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF #define SETPGRP_HAVE_ARG 1 @@ -4584,12 +4673,12 @@ done for ac_func in gettimeofday do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4588: checking for $ac_func" >&5 +echo "configure:4677: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4593 "configure" +#line 4682 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4612,7 +4701,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4631,14 +4720,14 @@ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then #define $ac_tr_func 1 EOF cat > conftest.$ac_ext <<EOF -#line 4635 "configure" +#line 4724 "configure" #include "confdefs.h" #include <sys/time.h> int main() { gettimeofday((struct timeval*)0,(struct timezone*)0); ; return 0; } EOF -if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4731: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then : else echo "configure: failed program was:" >&5 @@ -4658,12 +4747,12 @@ done # checks for structures echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 -echo "configure:4662: checking whether time.h and sys/time.h may both be included" >&5 +echo "configure:4751: checking whether time.h and sys/time.h may both be included" >&5 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4667 "configure" +#line 4756 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/time.h> @@ -4672,7 +4761,7 @@ int main() { struct tm *tp; ; return 0; } EOF -if { (eval echo configure:4676: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_time=yes else @@ -4693,12 +4782,12 @@ EOF fi echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 -echo "configure:4697: checking whether struct tm is in sys/time.h or time.h" >&5 +echo "configure:4786: checking whether struct tm is in sys/time.h or time.h" >&5 if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4702 "configure" +#line 4791 "configure" #include "confdefs.h" #include <sys/types.h> #include <time.h> @@ -4706,7 +4795,7 @@ int main() { struct tm *tp; tp->tm_sec; ; return 0; } EOF -if { (eval echo configure:4710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm=time.h else @@ -4727,12 +4816,12 @@ EOF fi echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6 -echo "configure:4731: checking for tm_zone in struct tm" >&5 +echo "configure:4820: checking for tm_zone in struct tm" >&5 if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4736 "configure" +#line 4825 "configure" #include "confdefs.h" #include <sys/types.h> #include <$ac_cv_struct_tm> @@ -4740,7 +4829,7 @@ int main() { struct tm tm; tm.tm_zone; ; return 0; } EOF -if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4833: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm_zone=yes else @@ -4760,12 +4849,12 @@ EOF else echo $ac_n "checking for tzname""... $ac_c" 1>&6 -echo "configure:4764: checking for tzname" >&5 +echo "configure:4853: checking for tzname" >&5 if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4769 "configure" +#line 4858 "configure" #include "confdefs.h" #include <time.h> #ifndef tzname /* For SGI. */ @@ -4775,7 +4864,7 @@ int main() { atoi(*tzname); ; return 0; } EOF -if { (eval echo configure:4779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_var_tzname=yes else @@ -4798,19 +4887,19 @@ fi echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6 -echo "configure:4802: checking for time.h that defines altzone" >&5 +echo "configure:4891: checking for time.h that defines altzone" >&5 if eval "test \"`echo '$''{'ac_cv_header_time_altzone'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4807 "configure" +#line 4896 "configure" #include "confdefs.h" #include <time.h> int main() { return altzone; ; return 0; } EOF -if { (eval echo configure:4814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_time_altzone=yes else @@ -4832,9 +4921,9 @@ fi was_it_defined=no echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6 -echo "configure:4836: checking whether sys/select.h and sys/time.h may both be included" >&5 +echo "configure:4925: checking whether sys/select.h and sys/time.h may both be included" >&5 cat > conftest.$ac_ext <<EOF -#line 4838 "configure" +#line 4927 "configure" #include "confdefs.h" #include <sys/types.h> @@ -4845,7 +4934,7 @@ int main() { ; ; return 0; } EOF -if { (eval echo configure:4849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4938: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF #define SYS_SELECT_WITH_SYS_TIME 1 @@ -4861,14 +4950,14 @@ echo "$ac_t""$was_it_defined" 1>&6 # checks for compiler characteristics echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6 -echo "configure:4865: checking whether char is unsigned" >&5 +echo "configure:4954: checking whether char is unsigned" >&5 if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$GCC" = yes; then # GCC predefines this symbol on systems where it applies. cat > conftest.$ac_ext <<EOF -#line 4872 "configure" +#line 4961 "configure" #include "confdefs.h" #ifdef __CHAR_UNSIGNED__ yes @@ -4890,7 +4979,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 4894 "configure" +#line 4983 "configure" #include "confdefs.h" /* volatile prevents gcc2 from optimizing the test away on sparcs. */ #if !defined(__STDC__) || __STDC__ != 1 @@ -4900,7 +4989,7 @@ main() { volatile char c = 255; exit(c < 0); } EOF -if { (eval echo configure:4904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_char_unsigned=yes else @@ -4924,12 +5013,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:4928: checking for working const" >&5 +echo "configure:5017: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4933 "configure" +#line 5022 "configure" #include "confdefs.h" int main() { @@ -4978,7 +5067,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:4982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5071: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -5001,16 +5090,16 @@ fi works=no echo $ac_n "checking for working volatile""... $ac_c" 1>&6 -echo "configure:5005: checking for working volatile" >&5 +echo "configure:5094: checking for working volatile" >&5 cat > conftest.$ac_ext <<EOF -#line 5007 "configure" +#line 5096 "configure" #include "confdefs.h" int main() { volatile int x; x = 0; ; return 0; } EOF -if { (eval echo configure:5014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5103: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* works=yes else @@ -5027,16 +5116,16 @@ echo "$ac_t""$works" 1>&6 works=no echo $ac_n "checking for working signed char""... $ac_c" 1>&6 -echo "configure:5031: checking for working signed char" >&5 +echo "configure:5120: checking for working signed char" >&5 cat > conftest.$ac_ext <<EOF -#line 5033 "configure" +#line 5122 "configure" #include "confdefs.h" int main() { signed char c; ; return 0; } EOF -if { (eval echo configure:5040: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* works=yes else @@ -5053,16 +5142,16 @@ echo "$ac_t""$works" 1>&6 have_prototypes=no echo $ac_n "checking for prototypes""... $ac_c" 1>&6 -echo "configure:5057: checking for prototypes" >&5 +echo "configure:5146: checking for prototypes" >&5 cat > conftest.$ac_ext <<EOF -#line 5059 "configure" +#line 5148 "configure" #include "confdefs.h" int foo(int x) { return 0; } int main() { return foo(10); ; return 0; } EOF -if { (eval echo configure:5066: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF #define HAVE_PROTOTYPES 1 @@ -5077,9 +5166,9 @@ echo "$ac_t""$have_prototypes" 1>&6 works=no echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6 -echo "configure:5081: checking for variable length prototypes and stdarg.h" >&5 +echo "configure:5170: checking for variable length prototypes and stdarg.h" >&5 cat > conftest.$ac_ext <<EOF -#line 5083 "configure" +#line 5172 "configure" #include "confdefs.h" #include <stdarg.h> @@ -5096,7 +5185,7 @@ int main() { return foo(10, "", 3.14); ; return 0; } EOF -if { (eval echo configure:5100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF #define HAVE_STDARG_PROTOTYPES 1 @@ -5112,16 +5201,16 @@ echo "$ac_t""$works" 1>&6 if test "$have_prototypes" = yes; then bad_prototypes=no echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6 -echo "configure:5116: checking for bad exec* prototypes" >&5 +echo "configure:5205: checking for bad exec* prototypes" >&5 cat > conftest.$ac_ext <<EOF -#line 5118 "configure" +#line 5207 "configure" #include "confdefs.h" #include <unistd.h> int main() { char **t;execve("@",t,t); ; return 0; } EOF -if { (eval echo configure:5125: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then : else echo "configure: failed program was:" >&5 @@ -5138,12 +5227,12 @@ fi bad_forward=no echo $ac_n "checking for bad static forward""... $ac_c" 1>&6 -echo "configure:5142: checking for bad static forward" >&5 +echo "configure:5231: checking for bad static forward" >&5 if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 5147 "configure" +#line 5236 "configure" #include "confdefs.h" struct s { int a; int b; }; @@ -5159,7 +5248,7 @@ main() { } EOF -if { (eval echo configure:5163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:5252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -5178,9 +5267,9 @@ echo "$ac_t""$bad_forward" 1>&6 va_list_is_array=no echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6 -echo "configure:5182: checking whether va_list is an array" >&5 +echo "configure:5271: checking whether va_list is an array" >&5 cat > conftest.$ac_ext <<EOF -#line 5184 "configure" +#line 5273 "configure" #include "confdefs.h" #ifdef HAVE_STDARG_PROTOTYPES @@ -5193,7 +5282,7 @@ int main() { va_list list1, list2; list1 = list2; ; return 0; } EOF -if { (eval echo configure:5197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then : else echo "configure: failed program was:" >&5 @@ -5209,12 +5298,12 @@ echo "$ac_t""$va_list_is_array" 1>&6 # sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-( echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6 -echo "configure:5213: checking for gethostbyname_r" >&5 +echo "configure:5302: checking for gethostbyname_r" >&5 if eval "test \"`echo '$''{'ac_cv_func_gethostbyname_r'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5218 "configure" +#line 5307 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char gethostbyname_r(); below. */ @@ -5237,7 +5326,7 @@ gethostbyname_r(); ; return 0; } EOF -if { (eval echo configure:5241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_gethostbyname_r=yes" else @@ -5257,11 +5346,11 @@ if eval "test \"`echo '$ac_cv_func_'gethostbyname_r`\" = yes"; then EOF echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6 -echo "configure:5261: checking gethostbyname_r with 6 args" >&5 +echo "configure:5350: checking gethostbyname_r with 6 args" >&5 OLD_CFLAGS=$CFLAGS CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS" cat > conftest.$ac_ext <<EOF -#line 5265 "configure" +#line 5354 "configure" #include "confdefs.h" # include <netdb.h> @@ -5278,7 +5367,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:5282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF @@ -5298,9 +5387,9 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6 -echo "configure:5302: checking gethostbyname_r with 5 args" >&5 +echo "configure:5391: checking gethostbyname_r with 5 args" >&5 cat > conftest.$ac_ext <<EOF -#line 5304 "configure" +#line 5393 "configure" #include "confdefs.h" # include <netdb.h> @@ -5317,7 +5406,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:5321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF @@ -5337,9 +5426,9 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6 -echo "configure:5341: checking gethostbyname_r with 3 args" >&5 +echo "configure:5430: checking gethostbyname_r with 3 args" >&5 cat > conftest.$ac_ext <<EOF -#line 5343 "configure" +#line 5432 "configure" #include "confdefs.h" # include <netdb.h> @@ -5354,7 +5443,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:5358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* cat >> confdefs.h <<\EOF @@ -5390,12 +5479,12 @@ else for ac_func in gethostbyname do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5394: checking for $ac_func" >&5 +echo "configure:5483: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5399 "configure" +#line 5488 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -5418,7 +5507,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:5422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5456,12 +5545,12 @@ fi # Linux requires this for correct f.p. operations echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6 -echo "configure:5460: checking for __fpu_control" >&5 +echo "configure:5549: checking for __fpu_control" >&5 if eval "test \"`echo '$''{'ac_cv_func___fpu_control'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5465 "configure" +#line 5554 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char __fpu_control(); below. */ @@ -5484,7 +5573,7 @@ __fpu_control(); ; return 0; } EOF -if { (eval echo configure:5488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func___fpu_control=yes" else @@ -5502,7 +5591,7 @@ if eval "test \"`echo '$ac_cv_func_'__fpu_control`\" = yes"; then else echo "$ac_t""no" 1>&6 echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6 -echo "configure:5506: checking for __fpu_control in -lieee" >&5 +echo "configure:5595: checking for __fpu_control in -lieee" >&5 ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5510,7 +5599,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lieee $LIBS" cat > conftest.$ac_ext <<EOF -#line 5514 "configure" +#line 5603 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -5521,7 +5610,7 @@ int main() { __fpu_control() ; return 0; } EOF -if { (eval echo configure:5525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5554,7 +5643,7 @@ fi # Check for --with-fpectl echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6 -echo "configure:5558: checking for --with-fpectl" >&5 +echo "configure:5647: checking for --with-fpectl" >&5 # Check whether --with-fpectl or --without-fpectl was given. if test "${with_fpectl+set}" = set; then withval="$with_fpectl" @@ -5580,7 +5669,7 @@ BeOS) ;; *) LIBM=-lm esac echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6 -echo "configure:5584: checking for --with-libm=STRING" >&5 +echo "configure:5673: checking for --with-libm=STRING" >&5 # Check whether --with-libm or --without-libm was given. if test "${with_libm+set}" = set; then withval="$with_libm" @@ -5601,7 +5690,7 @@ fi # check for --with-libc=... echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6 -echo "configure:5605: checking for --with-libc=STRING" >&5 +echo "configure:5694: checking for --with-libc=STRING" >&5 # Check whether --with-libc or --without-libc was given. if test "${with_libc+set}" = set; then withval="$with_libc" @@ -5625,12 +5714,12 @@ LIBS="$LIBS $LIBM" for ac_func in hypot do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5629: checking for $ac_func" >&5 +echo "configure:5718: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5634 "configure" +#line 5723 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -5653,7 +5742,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:5657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5683,7 +5772,7 @@ LIBS=$LIBS_SAVE # check whether malloc(0) returns NULL or not echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6 -echo "configure:5687: checking what malloc(0) returns" >&5 +echo "configure:5776: checking what malloc(0) returns" >&5 if eval "test \"`echo '$''{'ac_cv_malloc_zero'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5691,7 +5780,7 @@ else { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 5695 "configure" +#line 5784 "configure" #include "confdefs.h" #include <stdio.h> #ifdef HAVE_STDLIB @@ -5710,7 +5799,7 @@ main() { exit(0); } EOF -if { (eval echo configure:5714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:5803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_malloc_zero=nonnull else @@ -5736,17 +5825,17 @@ fi # check for wchar.h ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for wchar.h""... $ac_c" 1>&6 -echo "configure:5740: checking for wchar.h" >&5 +echo "configure:5829: checking for wchar.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5745 "configure" +#line 5834 "configure" #include "confdefs.h" #include <wchar.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5839: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5776,12 +5865,12 @@ fi # check for usable wchar_t usable_wchar_t="unkown" echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6 -echo "configure:5780: checking for usable wchar_t" >&5 +echo "configure:5869: checking for usable wchar_t" >&5 if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 5785 "configure" +#line 5874 "configure" #include "confdefs.h" #include "wchar.h" @@ -5795,7 +5884,7 @@ main() { } EOF -if { (eval echo configure:5799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:5888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then cat >> confdefs.h <<\EOF #define HAVE_USABLE_WCHAR_T 1 @@ -5814,14 +5903,14 @@ echo "$ac_t""$usable_wchar_t" 1>&6 # check for endianness echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:5818: checking whether byte ordering is bigendian" >&5 +echo "configure:5907: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 5825 "configure" +#line 5914 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -5832,11 +5921,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:5836: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5925: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 5840 "configure" +#line 5929 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -5847,7 +5936,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:5851: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5940: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -5867,7 +5956,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 5871 "configure" +#line 5960 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -5880,7 +5969,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:5884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:5973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -5907,7 +5996,7 @@ fi # Check whether right shifting a negative integer extends the sign bit # or fills with zeros (like the Cray J90, according to Tim Peters). echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6 -echo "configure:5911: checking whether right shift extends the sign bit" >&5 +echo "configure:6000: checking whether right shift extends the sign bit" >&5 if eval "test \"`echo '$''{'ac_cv_rshift_extends_sign'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5916,7 +6005,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 5920 "configure" +#line 6009 "configure" #include "confdefs.h" int main() @@ -5925,7 +6014,7 @@ int main() } EOF -if { (eval echo configure:5929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:6018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_rshift_extends_sign=yes else @@ -5950,13 +6039,13 @@ fi # check for getc_unlocked and related locking functions echo $ac_n "checking for getc_unlocked() and friends""... $ac_c" 1>&6 -echo "configure:5954: checking for getc_unlocked() and friends" >&5 +echo "configure:6043: checking for getc_unlocked() and friends" >&5 if eval "test \"`echo '$''{'ac_cv_have_getc_unlocked'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5960 "configure" +#line 6049 "configure" #include "confdefs.h" #include <stdio.h> int main() { @@ -5968,7 +6057,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:5972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_have_getc_unlocked=yes else @@ -5997,12 +6086,12 @@ cat >> confdefs.h <<\EOF #endif EOF echo $ac_n "checking for socklen_t""... $ac_c" 1>&6 -echo "configure:6001: checking for socklen_t" >&5 +echo "configure:6090: checking for socklen_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 6006 "configure" +#line 6095 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -6031,7 +6120,7 @@ fi echo $ac_n "checking for Modules/Setup""... $ac_c" 1>&6 -echo "configure:6035: checking for Modules/Setup" >&5 +echo "configure:6124: checking for Modules/Setup" >&5 if test ! -f Modules/Setup ; then if test ! -d Modules ; then mkdir Modules @@ -6205,6 +6294,8 @@ s%@SO@%$SO%g s%@LDSHARED@%$LDSHARED%g s%@CCSHARED@%$CCSHARED%g s%@LINKFORSHARED@%$LINKFORSHARED%g +s%@USE_NCURSES_MODULE@%$USE_NCURSES_MODULE%g +s%@USE_READLINE_MODULE@%$USE_READLINE_MODULE%g s%@USE_THREAD_MODULE@%$USE_THREAD_MODULE%g s%@LDLAST@%$LDLAST%g s%@USE_GC_MODULE@%$USE_GC_MODULE%g diff --git a/configure.in b/configure.in index a27a6ed6ff2..34e456cadac 100644 --- a/configure.in +++ b/configure.in @@ -734,6 +734,21 @@ AC_MSG_RESULT($withval) LIBS="$withval $LIBS" ], AC_MSG_RESULT(no)) +# This is used to generate Setup.config +AC_SUBST(USE_NCURSES_MODULE) +AC_CHECK_LIB(ncurses, initscr, + [USE_NCURSES_MODULE=""], + [USE_NCURSES_MODULE="#"], + -ltermcap) + +# This is used to generate Setup.config +AC_SUBST(USE_READLINE_MODULE) +AC_CHECK_LIB(readline, readline, + [USE_READLINE_MODULE=""], + [USE_READLINE_MODULE="#"], + -ltermcap) + +# This is used to generate Setup.config AC_SUBST(USE_THREAD_MODULE) USE_THREAD_MODULE="" |