net-wireless/hostapd: add new revision 2.7-r2

Cloned from 2.7-r1 verbatim, for further changes.

Package-Manager: Portage-2.3.49, Repoman-2.3.12
Signed-off-by: Andrey Utkin <andrey_utkin@gentoo.org>

1 files changed, 266 insertions, 0 deletions

diff --git a/net-wireless/hostapd/hostapd-2.7-r2.ebuild b/net-wireless/hostapd/hostapd-2.7-r2.ebuild
new file mode 100644
index 000000000000..a7e0d6678cb1
--- /dev/null
+++ b/net-wireless/hostapd/hostapd-2.7-r2.ebuild
@@ -0,0 +1,266 @@
+# Copyright 1999-2018 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+inherit toolchain-funcs eutils systemd savedconfig
+
+DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
+HOMEPAGE="http://w1.fi"
+EXTRAS_VER="2.7-r1"
+EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
+SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
+
+if [[ $PV == 9999 ]]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	if [[ $PV =~ ^.*_p[0-9]{8}$ ]]; then
+		SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
+	else
+		SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
+	fi
+	# Never stabilize snapshot ebuilds please
+	KEYWORDS="~amd64 ~arm ~mips ~ppc ~x86"
+fi
+
+LICENSE="BSD"
+SLOT="0"
+IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +wps +crda"
+
+DEPEND="
+	libressl? ( dev-libs/libressl:0= )
+	!libressl? (
+		internal-tls? ( dev-libs/libtommath )
+		!internal-tls? ( dev-libs/openssl:0=[-bindist] )
+	)
+	kernel_linux? (
+		dev-libs/libnl:3
+		crda? ( net-wireless/crda )
+	)
+	netlink? ( net-libs/libnfnetlink )
+	sqlite? ( >=dev-db/sqlite-3 )"
+
+RDEPEND="${DEPEND}"
+
+PATCHES=(
+	"${WORKDIR}/${EXTRAS_NAME}/0001-bug672834-libressl.patch"
+)
+
+S="${S}/${PN}"
+
+pkg_pretend() {
+	if use internal-tls; then
+		if use libressl; then
+			elog "libressl flag takes precedence over internal-tls"
+		else
+			ewarn "internal-tls implementation is experimental and provides fewer features"
+		fi
+	fi
+}
+
+src_unpack() {
+	# Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
+	default
+	if [[ ${PV} == 9999 ]] ; then
+		git-r3_src_unpack
+	fi
+}
+
+src_prepare() {
+	# Allow users to apply patches to src/drivers for example,
+	# i.e. anything outside ${S}/${PN}
+	pushd ../ >/dev/null || die
+	default
+	popd >/dev/null || die
+
+	sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
+		"${S}/hostapd.conf" || die
+}
+
+src_configure() {
+	local CONFIG="${S}/.config"
+
+	restore_config "${CONFIG}"
+	if [[ -f "${CONFIG}" ]]; then
+		default_src_configure
+		return 0
+	fi
+
+	# toolchain setup
+	echo "CC = $(tc-getCC)" > ${CONFIG}
+
+	# EAP authentication methods
+	echo "CONFIG_EAP=y" >> ${CONFIG}
+	echo "CONFIG_ERP=y" >> ${CONFIG}
+	echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
+
+	if use internal-tls && ! use libressl; then
+		echo "CONFIG_TLS=internal" >> ${CONFIG}
+	else
+		# SSL authentication methods
+		echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
+		echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
+		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
+		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
+		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
+		echo "CONFIG_TLSV11=y" >> ${CONFIG}
+		echo "CONFIG_TLSV12=y" >> ${CONFIG}
+		echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
+	fi
+
+	if use wps; then
+		# Enable Wi-Fi Protected Setup
+		echo "CONFIG_WPS=y" >> ${CONFIG}
+		echo "CONFIG_WPS2=y" >> ${CONFIG}
+		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
+		echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
+		einfo "Enabling Wi-Fi Protected Setup support"
+	fi
+
+	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
+	echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
+	echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
+	echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
+	echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
+	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
+	echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
+	echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
+	echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
+	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
+	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
+	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
+
+	einfo "Enabling drivers: "
+
+	# drivers
+	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
+	einfo "  HostAP driver enabled"
+	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
+	einfo "  Wired driver enabled"
+	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
+	einfo "  None driver enabled"
+
+	einfo "  nl80211 driver enabled"
+	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
+
+	# epoll
+	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
+
+	# misc
+	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
+	echo "CONFIG_PKCS12=y" >> ${CONFIG}
+	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
+	echo "CONFIG_IAPP=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
+	echo "CONFIG_PEERKEY=y" >> ${CONFIG}
+	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
+	echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
+	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
+	echo "CONFIG_HS20=y" >> ${CONFIG}
+	echo "CONFIG_WNM=y" >> ${CONFIG}
+	echo "CONFIG_FST=y" >> ${CONFIG}
+	echo "CONFIG_FST_TEST=y" >> ${CONFIG}
+	echo "CONFIG_ACS=y" >> ${CONFIG}
+
+	if use netlink; then
+		# Netlink support
+		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
+	fi
+
+	if use ipv6; then
+		# IPv6 support
+		echo "CONFIG_IPV6=y" >> ${CONFIG}
+	fi
+
+	if use sqlite; then
+		# Sqlite support
+		echo "CONFIG_SQLITE=y" >> ${CONFIG}
+	fi
+
+	# If we are using libnl 2.0 and above, enable support for it
+	# Removed for now, since the 3.2 version is broken, and we don't
+	# support it.
+	if has_version ">=dev-libs/libnl-3.2"; then
+		echo "CONFIG_LIBNL32=y" >> .config
+	fi
+
+	# TODO: Add support for BSD drivers
+
+	default_src_configure
+}
+
+src_compile() {
+	emake V=1
+
+	if use libressl || ! use internal-tls; then
+		emake V=1 nt_password_hash
+		emake V=1 hlr_auc_gw
+	fi
+}
+
+src_install() {
+	insinto /etc/${PN}
+	doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
+
+	fperms -R 600 /etc/${PN}
+
+	dosbin ${PN}
+	dobin ${PN}_cli
+
+	if use libressl || ! use internal-tls; then
+		dobin nt_password_hash hlr_auc_gw
+	fi
+
+	newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
+	newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
+	systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
+
+	doman ${PN}{.8,_cli.1}
+
+	dodoc ChangeLog README
+	use wps && dodoc README-WPS
+
+	docinto examples
+	dodoc wired.conf
+
+	if use logwatch; then
+		insinto /etc/log.d/conf/services/
+		doins logwatch/${PN}.conf
+
+		exeinto /etc/log.d/scripts/services/
+		doexe logwatch/${PN}
+	fi
+
+	save_config .config
+}
+
+pkg_postinst() {
+	einfo
+	einfo "If you are running openRC you need to follow this instructions:"
+	einfo "In order to use ${PN} you need to set up your wireless card"
+	einfo "for master mode in /etc/conf.d/net and then start"
+	einfo "/etc/init.d/${PN}."
+	einfo
+	einfo "Example configuration:"
+	einfo
+	einfo "config_wlan0=( \"192.168.1.1/24\" )"
+	einfo "channel_wlan0=\"6\""
+	einfo "essid_wlan0=\"test\""
+	einfo "mode_wlan0=\"master\""
+	einfo
+	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
+	#	einfo "This package now compiles against the headers installed by"
+	#	einfo "the kernel source for the mac80211 driver. You should "
+	#	einfo "re-emerge ${PN} after upgrading your kernel source."
+	#fi
+
+	if use wps; then
+		einfo "You have enabled Wi-Fi Protected Setup support, please"
+		einfo "read the README-WPS file in /usr/share/doc/${P}"
+		einfo "for info on how to use WPS"
+	fi
+}