summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPeter Alfredsen <crabbedhaloablution@icloud.com>2020-11-22 15:28:14 +0100
committerSam James <sam@gentoo.org>2020-11-23 04:39:17 +0000
commit7b070b6db76f641cfd37abedf201b9fd120bb5e5 (patch)
tree04c643931047b05420279dc3787319a47acc76bc /sys-boot/raspberrypi-firmware
parentsys-kernel/raspberrypi-image: Simple bump to 5.4.72_p20201022 (diff)
downloadgentoo-7b070b6db76f641cfd37abedf201b9fd120bb5e5.tar.gz
gentoo-7b070b6db76f641cfd37abedf201b9fd120bb5e5.tar.bz2
gentoo-7b070b6db76f641cfd37abedf201b9fd120bb5e5.zip
sys-boot/raspberrypi-firmware: Bump to 20201022, keeping -9999 on par
Add new cmdline.txt and config.txt from upstream Closes: https://bugs.gentoo.org/715984 Package-Manager: Portage-3.0.9, Repoman-3.0.2 Signed-off-by: Peter Alfredsen <crabbedhaloablution@icloud.com> Closes: https://github.com/gentoo/gentoo/pull/18362 Signed-off-by: Sam James <sam@gentoo.org>
Diffstat (limited to 'sys-boot/raspberrypi-firmware')
-rw-r--r--sys-boot/raspberrypi-firmware/Manifest1
-rw-r--r--sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt1
-rw-r--r--sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-config.txt65
-rw-r--r--sys-boot/raspberrypi-firmware/raspberrypi-firmware-1.20201022.ebuild73
-rw-r--r--sys-boot/raspberrypi-firmware/raspberrypi-firmware-9999.ebuild15
5 files changed, 152 insertions, 3 deletions
diff --git a/sys-boot/raspberrypi-firmware/Manifest b/sys-boot/raspberrypi-firmware/Manifest
index 2570229caf31..2d1c89bcef4e 100644
--- a/sys-boot/raspberrypi-firmware/Manifest
+++ b/sys-boot/raspberrypi-firmware/Manifest
@@ -1,3 +1,4 @@
DIST raspberrypi-firmware-1.20190215.tar.gz 123074917 BLAKE2B cefedb5c979db7dfd47938aad37a567d91d3ad78247c7a63f789362768ab7a39a1967ac116b4b0475e3b210ab11f6474706df042af85a622e8e7905c85ec7498 SHA512 082f26caf427222d838881e5f1e9fa0136765b3eaf74a84877fc33616fd07e49085db0889226c40c655039a9d41a10566510c7d752cfc48a67b4683616a51193
DIST raspberrypi-firmware-1.20190709.tar.gz 158835870 BLAKE2B 4e63b3308adcd75f69f66966f1c927449aa8dc65211e6ca5a27dd2a0ed6ed32cc85ad42221308f4fb3a852d9f278400cfe4f723f306abe102341568408027174 SHA512 6a0610c97db47441ede8e4f8436958899f678bf065a0fbde06de7945a1ac4d5f754a0e10d928d77759ba1cbf82654d85d9cb9c91b970c3fe9590560267033522
DIST raspberrypi-firmware-1.20190925.tar.gz 185571086 BLAKE2B c3a9b2760fa853fbd1dd09bc4048c9e78594f88da5af608c3a761554d4046a4c869db8981c64140a24e82e0a61b8dc776bb8d895df60c6424e44780f78b18cb0 SHA512 4b7b29cc6c2a33d7a37987c492034d9afbb2220364c50cf265e0adf8e5f393c2275dcffaa77c89b3f43b2e98d199741b67590cb60ff8beae8ef677852f63b4a0
+DIST raspberrypi-firmware-1.20201022.tar.gz 189827375 BLAKE2B 94c38f60d688c8e3ebab830912daccbb6c04bdd3d88f6ca0d07d85be0a6b12c53f0266b4c258ed4694f30bad5db30fb6d30feabfd0b7668735a9a806b820d325 SHA512 876758179df27109984b6c3f4849fdcdc6bdcc2769495fcc83c97fc3ff4d07b9f3cd58086be877503f72c9e5417d2be6d6c33bce4cbb3b862055117c9cc26db8
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt
new file mode 100644
index 000000000000..b815bd89db1f
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt
@@ -0,0 +1 @@
+console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-config.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-config.txt
new file mode 100644
index 000000000000..548f4accc250
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-config.txt
@@ -0,0 +1,65 @@
+# For more options and information see
+# http://rpf.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Uncomment this to enable infrared communication.
+#dtoverlay=gpio-ir,gpio_pin=17
+#dtoverlay=gpio-ir-tx,gpio_pin=18
+
+# Additional overlays and parameters are documented /boot/overlays/README
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+[pi4]
+# Enable DRM VC4 V3D driver on top of the dispmanx display stack
+dtoverlay=vc4-fkms-v3d
+max_framebuffers=2
+
+[all]
+#dtoverlay=vc4-fkms-v3d
diff --git a/sys-boot/raspberrypi-firmware/raspberrypi-firmware-1.20201022.ebuild b/sys-boot/raspberrypi-firmware/raspberrypi-firmware-1.20201022.ebuild
new file mode 100644
index 000000000000..b2767ce80518
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/raspberrypi-firmware-1.20201022.ebuild
@@ -0,0 +1,73 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit mount-boot readme.gentoo-r1
+
+DESCRIPTION="Raspberry Pi (all versions) bootloader and GPU firmware"
+HOMEPAGE="https://github.com/raspberrypi/firmware"
+LICENSE="GPL-2 raspberrypi-videocore-bin"
+SLOT="0"
+
+# Temporary safety measure to prevent ending up with a pair of
+# sys-kernel/raspberrypi-image and sys-boot/raspberrypi-firmware
+# none of which installed device tree files.
+# Remove when the mentioned version and all older ones are deleted.
+RDEPEND="!<=sys-kernel/raspberrypi-image-4.19.57_p20190709"
+
+if [[ "${PV}" == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://github.com/raspberrypi/firmware"
+ EGIT_CLONE_TYPE="shallow"
+else
+ SRC_URI="https://github.com/raspberrypi/firmware/archive/${PV}.tar.gz -> ${P}.tar.gz"
+ KEYWORDS="-* ~arm ~arm64"
+ S="${WORKDIR}/firmware-${PV}"
+fi
+
+RESTRICT="binchecks strip"
+
+pkg_preinst() {
+ if [ -z "${REPLACING_VERSIONS}" ] ; then
+ local msg=""
+ if [ -e "${D}"/boot/cmdline.txt -a -e /boot/cmdline.txt ] ; then
+ msg+="/boot/cmdline.txt "
+ fi
+ if [ -e "${D}"/boot/config.txt -a -e /boot/config.txt ] ; then
+ msg+="/boot/config.txt "
+ fi
+ if [ -n "${msg}" ] ; then
+ msg="This package installs following files: ${msg}."
+ msg="${msg} Please remove(backup) your copies durning install"
+ msg="${msg} and merge settings afterwards."
+ msg="${msg} Further updates will be CONFIG_PROTECTed."
+ die "${msg}"
+ fi
+ fi
+}
+
+src_prepare() {
+ default
+ cp "${FILESDIR}"/${PN}-1.20201022-config.txt "${WORKDIR}" || die
+ if use arm64; then
+ # Force selection of the 64-bit kernel8.img to match our userland
+ echo "arm_64bit=1" >> "${WORKDIR}"/${PN}-1.20201022-config.txt || die
+ fi
+}
+
+src_install() {
+ insinto /boot
+ cd boot || die
+ doins bootcode.bin fixup*.dat start*elf
+ newins "${WORKDIR}"/${PN}-1.20201022-config.txt config.txt
+ newins "${FILESDIR}"/${PN}-1.20201022-cmdline.txt cmdline.txt
+ newenvd "${FILESDIR}"/${PN}-0_p20130711-envd 90${PN}
+ readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+ readme.gentoo_print_elog
+}
+
+DOC_CONTENTS="Please configure your ram setup by editing /boot/config.txt"
diff --git a/sys-boot/raspberrypi-firmware/raspberrypi-firmware-9999.ebuild b/sys-boot/raspberrypi-firmware/raspberrypi-firmware-9999.ebuild
index 3b499cf2ad55..b2767ce80518 100644
--- a/sys-boot/raspberrypi-firmware/raspberrypi-firmware-9999.ebuild
+++ b/sys-boot/raspberrypi-firmware/raspberrypi-firmware-9999.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2019 Gentoo Authors
+# Copyright 1999-2020 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -47,12 +47,21 @@ pkg_preinst() {
fi
}
+src_prepare() {
+ default
+ cp "${FILESDIR}"/${PN}-1.20201022-config.txt "${WORKDIR}" || die
+ if use arm64; then
+ # Force selection of the 64-bit kernel8.img to match our userland
+ echo "arm_64bit=1" >> "${WORKDIR}"/${PN}-1.20201022-config.txt || die
+ fi
+}
+
src_install() {
insinto /boot
cd boot || die
doins bootcode.bin fixup*.dat start*elf
- newins "${FILESDIR}"/${PN}-0_p20130711-config.txt config.txt
- newins "${FILESDIR}"/${PN}-0_p20130711-cmdline.txt cmdline.txt
+ newins "${WORKDIR}"/${PN}-1.20201022-config.txt config.txt
+ newins "${FILESDIR}"/${PN}-1.20201022-cmdline.txt cmdline.txt
newenvd "${FILESDIR}"/${PN}-0_p20130711-envd 90${PN}
readme.gentoo_create_doc
}